EN ISO 14505-2:2006

Ergonomics of the thermal environment - Evaluation of thermal environments in vehicles - Part 2: Determination of equivalent temperature (ISO 14505-2:2006)

ISO 14505-2:2006 provides guidelines for the assessment of the thermal conditions inside a vehicle compartment. It can also be applied to other confined spaces with asymmetric climatic conditions. It is primarily intended for assessment of thermal conditions, when deviations from thermal neutrality are relatively small. Appropriate methodology as given in ISO 14505-2:2006 can be chosen for inclusion in specific performance standards for testing of HVAC-systems for vehicles and similar confined spaces.

Ergonomie der thermischen Umgebung - Beurteilung der thermischen Umgebung in Fahrzeugen - Teil 2: Bestimmung der Äquivalenttemperatur (ISO 14505-2:2006)

Dieser Teil von ISO 14505 enthält Leitlinien für die Beurteilung der thermischen Bedingungen in einem Fahrzeug. Er kann auch für andere geschlossene Räume mit asymmetrischen Klimabedingungen angewendet werden. Er ist in erster Linie für die Beurteilung der thermischen Bedingungen vorgesehen, wenn die Abweichungen von der thermischen Neutralität relativ klein sind.  Eine geeignete Methodologie, wie sie in diesem Teil von ISO 14505 angegeben ist, kann ausgewählt werden, um in speziellen Anforderungsnormen zur Prüfung von HVAC Anlagen für Fahrzeuge und ähnliche geschlossene Räume berücksichtigt zu werden.

Ergonomie des ambiances thermiques - Évaluation des ambiances thermiques dans les véhicules - Partie 2: Détermination de la température équivalente (ISO 14505-2:2006)

L'ISO 14505-2:2006 donne des lignes directrices relatives à l'évaluation des conditions thermiques à l'intérieur d'un habitacle de véhicule. Elle peut également s'appliquer à d'autres espaces confinés où règnent des conditions climatiques asymétriques. Elle est essentiellement destinée à l'évaluation des conditions thermiques, lorsque les écarts par rapport à la neutralité thermique sont relativement faibles. L'une des méthodes appropriées décrite dans l'ISO 14505-2:2006 peut être choisie pour être incluse dans des normes de performance spécifiques en vue d'essayer les systèmes de chauffage, de ventilation et de climatisation (système CVCA) des véhicules et les espaces confinés analogues.

Ergonomija toplotnega okolja – Vrednotenje toplotnega okolja v vozilih – 2. del: Ugotavljanje ekvivalentne temperature (ISO 14505-2:2006)

General Information

• Status: Published
• Publication Date: 14-Dec-2006
• Withdrawal Date: 29-Jun-2007
• ICS: 13.180 - Ergonomics
• ICS: 43.020 - Road vehicles in general
• Technical Committee: CEN/TC 122 - Ergonomics
• Drafting Committee: CEN/TC 122/WG 11 - Ergonomics of the Physical Environment
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 15-Dec-2006
• Completion Date: 15-Dec-2006
• Ref Project: SIST EN ISO 14505-2:2007 - Ergonomics of the thermal environment - Evaluation of thermal environments in vehicles - Part 2: Determination of equivalent temperature (ISO 14505-2:2006)

Relations

• Corrected By: EN ISO 14505-2:2006/AC:2009 - Ergonomics of the thermal environment - Evaluation of thermal environments in vehicles - Part 2: Determination of equivalent temperature (ISO 14505-2:2006/Cor 1:2007)
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 14505-2:2007
01-april-2007
Ergonomija toplotnega okolja – Vrednotenje toplotnega okolja v vozilih – 2. del:
Ugotavljanje ekvivalentne temperature (ISO 14505-2:2006)
Ergonomics of the thermal environment - Evaluation of thermal environments in vehicles
- Part 2: Determination of equivalent temperature (ISO 14505-2:2006)
Ergonomie der thermischen Umgebung - Beurteilung der thermischen Umgebung in
Fahrzeugen - Teil 2: Bestimmung der Äquivalenttemperatur (ISO 14505-2:2006)
Ergonomie des ambiances thermiques - Évaluation des ambiances thermiques dans les
véhicules - Partie 2: Détermination de la température équivalente (ISO 14505-2:2006)
Ta slovenski standard je istoveten z: EN ISO 14505-2:2006
ICS:
13.180 Ergonomija Ergonomics
43.020 Cestna vozila na splošno Road vehicles in general
SIST EN ISO 14505-2:2007 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN ISO 14505-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2006
ICS 13.180; 43.020

English Version
Ergonomics of the thermal environment - Evaluation of thermal
environments in vehicles - Part 2: Determination of equivalent
temperature (ISO 14505-2:2006)
Ergonomie des ambiances thermiques - Évaluation des Ergonomie der thermischen Umgebung - Beurteilung der
ambiances thermiques dans les véhicules - Partie 2: thermischen Umgebung in Fahrzeugen - Teil 2:
Détermination de la température équivalente (ISO 14505- Bestimmung der Äquivalenttemperatur (ISO 14505-2:2006)
2:2006)
This European Standard was approved by CEN on 14 December 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 14505-2:2006: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN ISO 14505-2:2006 (E)





Foreword


This document (EN ISO 14505-2:2006) has been prepared by Technical Committee ISO/TC 159
"Ergonomics" in collaboration with Technical Committee CEN/TC 122 "Ergonomics", the secretariat
of which is held by DIN.

This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2007, and conflicting national standards shall
be withdrawn at the latest by June 2007.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Cyprus,
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.


Endorsement notice

The text of ISO 14505-2:2006 has been approved by CEN as EN ISO 14505-2:2006 without any
modifications.




2

---------------------- Page: 3 ----------------------

INTERNATIONAL ISO
STANDARD 14505-2
First edition
2006-12-15


Ergonomics of the thermal
environment — Evaluation of thermal
environments in vehicles —
Part 2:
Determination of equivalent temperature
Ergonomie des ambiances thermiques — Évaluation des ambiances
thermiques dans les véhicules —
Partie 2: Détermination de la température équivalente




Reference number
ISO 14505-2:2006(E)
©
ISO 2006

---------------------- Page: 4 ----------------------

ISO 14505-2:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept
...