EN 15373:2007

Furniture - Strength, durability and safety - Requirements for non-domestic seating

This European standard specifies requirements for the safety, strength and durability of all types of non-domestic seating for adults.
It does not apply to ranked seating, office work chairs, office visitors chairs, chairs for educational institutions, outdoor seating and to links for linked seating for which European standards or drafts exist.
It does not include requirements for the durability of upholstery materials, castors, reclining and tilting mechanisms and seat height adjustment mechanisms.
The test requirements contained within this standard are based on use by persons weighing up to 110 kg.
It does not include requirements for resistance to ageing, degradation and flammability.

Möbel - Festigkeit, Dauerhaltbarkeit und Sicherheit - Anforderungen an Sitzmöbel für den Nicht-Wohnbereich

Diese Europäische Norm legt Anforderungen an die Sicherheit, Festigkeit und Dauerhaltbarkeit von allen Arten von Sitzmöbeln für den Nicht-Wohnbereich für Erwachsene fest.
Die Norm gilt nicht für fest montiertes Reihengestühl, Büro-Arbeitsstühle, Büro-Besucherstühle, Stühle für Bildungseinrichtungen, Außensitzmöbel und Verbindungselemente für Reihenbestuhlung, für die eigene EN-Normen oder  Normentwürfe bestehen.
Sie enthält keine Anforderungen an die Dauerhaltbarkeit von Polstermaterialien, Rollen, Neige- und Kippmechanismen und Höhenverstelleinrichtungen der Sitze.
Sie enthält keine Anforderungen an die Beständigkeit gegen Alterung, Qualitätsminderung und Brennbarkeit (Entflammbarkeit).

Mobilier - Résistance, durabilité et sécurité - Exigences applicables aux sièges à usage non domestique

La présente Norme européenne spécifie les exigences de sécurité, de résistance et de durabilité de tous les types de sièges pour adultes à usage non domestique.
Elle ne s’applique pas aux sièges assemblés en rangées, aux sièges de bureau, aux sièges visiteurs, aux sièges pour établissements d’enseignement, aux sièges d’extérieur ou aux assemblages de sièges assemblés pour lesquels il existe d’autres normes ou projets de normes européens.
Elle ne comprend aucune exigence concernant la durabilité des matériaux de rembourrage, des roulettes, des mécanismes d’inclinaison et de basculement ou des mécanismes de réglage de la hauteur du siège.
Les exigences d’essai contenues dans la présente norme reposent sur le postulat que les sièges sont utilisés par des personnes pesant jusqu’à 110 kg.
La présente Norme ne contient aucune exigence relative à la résistance au vieillissement, à la dégradation ou à l’inflammabilité.

Pohištvo - Trdnost, trajnost in varnost - Zahteve za sedežno pohištvo, ki ni za domačo uporabo

General Information

• Status: Withdrawn
• Publication Date: 17-Apr-2007
• Withdrawal Date: 05-Mar-2013
• ICS: 97.140 - Furniture
• Technical Committee: CEN/TC 207 - Furniture
• Drafting Committee: CEN/TC 207/WG 5 - Contract and educational furniture
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 06-Mar-2013
• Completion Date: 06-Mar-2013
• Ref Project: SIST EN 15373:2007 - Furniture - Strength, durability and safety - Requirements for non-domestic seating

Relations

• Replaced By: EN 16139:2013 - Furniture - Strength, durability and safety - Requirements for non-domestic seating
• Effective Date: 03-Apr-2013

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Furniture - Strength, durability and safety - Requirements for non-domestic seatingMobilier - Résistance, durabilité et sécurité - Exigences applicables aux sieges a usage non domestiqueMöbel - Festigkeit, Dauerhaltbarkeit und Sicherheit - Anforderungen an Sitzmöbel für den Nicht-WohnbereichTa slovenski standard je istoveten z:EN 15373:2007SIST EN 15373:2007en,fr,de97.140PohištvoFurnitureICS:SLOVENSKI
STANDARDSIST EN 15373:200701-september-2007

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 15373April 2007ICS 97.140 English VersionFurniture - Strength, durability and safety - Requirements fornon-domestic seatingMobilier - Résistance, durabilité et sécurité - Exigencesapplicables aux sièges à usage non domestiqueMöbel - Festigkeit, Dauerhaltbarkeit und Sicherheit -Anforderungen an Sitzmöbel für den Nicht-WohnbereichThis European Standard was approved by CEN on 15 March 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15373:2007: E

Tests for special types of seating and components.10 A.1 Vertical upwards static load on arm rests.10 A.1.1 Seating which may be moved when occupied.10 A.1.2 Stacking seating.10 A.2 Vertical load on back rests.10 A.3 Auxiliary writing surface static load test.10 A.4 Auxiliary writing surface fatigue test.11 A.5 Foot rail fatigue test.11 Annex B (informative)
Additional tests.12 B.1 Drop test for stacking seating.12 B.2 Backward fall test.13 B.3 Drop test from the height of a table.13 Annex C (informative)
Test Severity in Relation to Applications.15

The test requirements contained within this standard are based on use by persons weighing up to 110 kg.
It does not include requirements for resistance to ageing, degradation and flammability. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1022:2005, Domestic furniture – Seating – Determination of stability EN 1335-1:2000, Office furniture – Office work chair – Part 1 : Dimensions – Determination of dimensions EN 1335-3:2000, Office furniture – Office work chair – Part 3 : Safety test methods
EN 1728:2000, Domestic furniture - Seating - Test methods for the determination of strength and durability 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 accessible parts parts to which access can easily be gained by the user when the seating is in its intended configuration of use and for which the probability of unintentional user contact is high 3.2 parts accessible during setting up and folding parts to which access can only be gained when setting up and folding the furniture
3.3 shear and squeeze points shear and squeeze points exist if the distance between two accessible parts moving relative to each other can be less than 18 mm or more than 7 mm in any position during movement 3.4 castor type H castors with rigid wheels, i.e. hard treads
NOTE 1 The wheel is of one colour over the entire surface NOTE 2 These castors are suitable for carpeted floors.

castor type W castors with resilient tyred wheels, i.e. soft treads
NOTE 1 This is clearly a different colour to the wheel centre NOTE 2 These castors are suitable for hard stone, wooden or tiled floors or those featuring non-textiled covering. 4 Test sequence The tests shall be carried out in the order in which they are listed in this Standard. 5 Safety requirements 5.1 General The seating shall be designed so as to minimise the risk of injury to the user. All parts of the seating with which the user comes into contact during intended use, shall be designed so that physical injury and damage are avoided. This requirement is met when: 1. Edges of the seat, back rest and arm rests which are in contact with the user when sitting in the seating are rounded or chamfered and all other edges accessible during use are free from burrs and/or sharp edges. 2. Ends of hollow components are closed or capped. Movable and adjustable parts shall be designed so that injuries and inadvertent operation are avoided.
It shall not be possible for any load bearing part of the seating to come loose unintentionally.
All parts that are lubricated to assist sliding shall be designed to protect users from lubricant stains when in normal use. 5.2 Shear and squeeze points 5.2.1 Shear and squeeze points when setting up and folding Unless 5.2.2 or 5.2.3 are applicable, shear and squeeze points that are created only during setting up and folding, including tipping seat actions, are acceptable, because the user can be assumed to be in control of his/her movements and able to cease applying the force immediately upon experiencing pain. The edges of parts moving relative to each other and creating shear and squeeze points shall be as specified in 5.1. 5.2.2 Shear and squeeze points under influence of powered mechanisms With the exception of tipping seats there shall be no shear and squeeze points created by parts of the seating operated by powered mechanisms, e.g. springs and gas lifts. 5.2.3 Shear and squeeze points during use There shall be no shear and squeeze points created by forces applied during normal use, see Table 1.
...