EN ISO 4625-2:2006

Binders for paints and varnishes - Determination of softening point - Part 2: Cup-and-ball method (ISO 4625-2:2004)

ISO 4625-2:2004 specifies a method for determining the softening point of resins (including rosin) by means of a cup-and-ball apparatus and can, under user-defined conditions, give results comparable to those obtained using the ring-and-ball method (ISO 4625-1).

Bindemittel für Beschichtungsstoffe - Bestimmung der Erweichungstemperatur - Teil 2: Verfahren mit Becher und Kugel (ISO 4625-2:2004)

Liants pour peintures et vernis - Détermination du point de ramollissement - Partie 2: Méthode de la coupe et de la bille (ISO 4625-2:2004)

L'ISO 4625-2:2004 spécifie une méthode de détermination du point de ramollissement des résines (y compris la colophane) au moyen d'un appareil à coupe et à bille et peut, dans des conditions définies par l'utilisateur, fournir des résultats comparables à ceux obtenus avec la méthode de l'anneau et de la bille (ISO 4625-1).

Veziva za barve in lake – Ugotavljanje zmehčišča – 2. del: Metoda s čašo in kroglico (ISO 4625-2:2004)

General Information

• Status: Published
• Publication Date: 07-Feb-2006
• Withdrawal Date: 30-Aug-2006
• ICS: 87.060.20 - Binders
• Technical Committee: CEN/TC 139 - Paints and varnishes
• Drafting Committee: CEN/TC 139 - Paints and varnishes
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 08-Feb-2006
• Due Date: 12-Sep-2006
• Completion Date: 08-Feb-2006
• Ref Project: SIST EN ISO 4625-2:2006 - Binders for paints and varnishes - Determination of softening point - Part 2: Cup-and-ball method (ISO 4625-2:2004)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 4625-2:2006
01-april-2006
9H]LYD]DEDUYHLQODNH±8JRWDYOMDQMH]PHKþLãþD±GHO0HWRGDVþDãRLQ
NURJOLFR,62
Binders for paints and varnishes - Determination of softening point - Part 2: Cup-and-ball
method (ISO 4625-2:2004)
Bindemittel für Beschichtungsstoffe - Bestimmung der Erweichungstemperatur - Teil 2:
Verfahren mit Becher und Kugel (ISO 4625-2:2004)
Liants pour peintures et vernis - Détermination du point de ramollissement - Partie 2:
Méthode de la coupe et de la bille (ISO 4625-2:2004)
Ta slovenski standard je istoveten z: EN ISO 4625-2:2006
ICS:
87.060.20 Veziva Binders
SIST EN ISO 4625-2:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 4625-2:2006

---------------------- Page: 2 ----------------------

SIST EN ISO 4625-2:2006
EUROPEAN STANDARD
EN ISO 4625-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2006
ICS 87.060.20

English Version
Binders for paints and varnishes - Determination of softening
point - Part 2: Cup-and-ball method (ISO 4625-2:2004)
Liants pour peintures et vernis - Détermination du point de Bindemittel für Beschichtungsstoffe - Bestimmung der
ramollissement - Partie 2: Méthode de la coupe et de la Erweichungstemperatur - Teil 2: Verfahren mit Becher und
bille (ISO 4625-2:2004) Kugel (ISO 4625-2:2004)
This European Standard was approved by CEN on 16 January 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 4625-2:2006: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 4625-2:2006
EN ISO 4625-2:2006 (E)






Foreword



The text of ISO 4625-2:2004 has been prepared by Technical Committee ISO/TC 35 "Paints and
varnishes” of the International Organization for Standardization (ISO) and has been taken over
as EN ISO 4625-2:2006 by Technical Committee CEN/TC 139 "Paints and varnishes", the
secretariat of which is held by DIN.

This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by August 2006, and conflicting national
standards shall be withdrawn at the latest by August 2006.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.



Endorsement notice

The text of ISO 4625-2:2004 has been approved by CEN as EN ISO 4625-2:2006 without any
modifications.

2

---------------------- Page: 4 ----------------------

SIST EN ISO 4625-2:2006


INTERNATIONAL ISO
STANDARD 4625-2
First edition
2004-08-15

Binders for paints and varnishes —
Determination of softening point —
Part 2:
Cup-and-ball method
Liants pour peintures et vernis — Détermination du point de
ramollissement —
Partie 2: Méthode de la coupe et de la bille




Reference number
ISO 4625-2:2004(E)
©
ISO 2004

---------------------- Page: 5 ----------------------

SIST EN ISO 4625-2:2006
ISO 4625-2:2004(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing polic
...