EN 13480-2:2002
(Main)Metallic industrial piping - Part 2: Materials
Metallic industrial piping - Part 2: Materials
This part of EN 13480 covers the requirements for materials (including clad materials) for industrial piping and supports covered by EN 13480-1 constructed of metallic materials and is currently limited to steels with sufficient ductility below the creep range. It specifies the assessment of compliance for these materials. It also provides rules for the establishment of technical delivery conditions for materials for industrial piping.
Metallische industrielle Rohrleitungen - Teil 2: Werkstoffe
Dieser Teil der EN 13480 legt die Anforderungen an Werkstoffe (einschließlich Plattierungswerkstoffe) für Rohrleitungen nach der EN 13480-1 aus metallischen Werkstoffen fest; sie ist zur Zeit auf Stähle ausreichender Duktilität begrenzt. Dieser Teil gilt nicht im Zeitstandbereich. Die Norm legt das für diese Werkstoffe anzuwendende Konformitätsbewertungsverfahren fest. Ferner enthält sie Regeln für die Festlegung von technischen Lieferbedingungen für Werkstoffe für Rohrleitungen.
Tuyauteries industrielles métalliques - Partie 2: Matériaux
La présente partie de la présente norme européenne spécifie les exigences relatives aux matériaux (y compris les matériaux métalliques plaqués) pour tuyauteries industrielles et supports fabriqués à partir de matériaux métalliques et couverts par prEN 13480-1. Elle est limitée actuellement aux aciers ayant une ductilité suffisante. La norme ne s'applique pas dans le domaine du fluage.
NOTE D'autres matériaux seront ajoutés ultérieurement par amendements.
Elle spécifie les exigences relatives au choix, à l'inspection, au contrôle et au marquage des matériaux métalliques destinés à la fabrication des tuyauteries industrielles.
Kovinski industrijski cevovodi - 2. del: Materiali
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kovinski industrijski cevovodi - 2. del: MaterialiMetallische industrielle Rohrleitungen - Teil 2: WerkstoffeTuyauteries industrielles métalliques - Partie 2: MatériauxMetallic industrial piping - Part 2: Materials77.140.75Jeklene cevi in cevni profili za posebne nameneSteel pipes and tubes for specific useICS:Ta slovenski standard je istoveten z:EN 13480-2:2002SIST EN 13480-2:2002en01-november-2002SIST EN 13480-2:2002SLOVENSKI
STANDARD
SIST EN 13480-2:2002
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13480-2May 2002ICS 23.040.01English versionMetallic industrial piping - Part 2: MaterialsTuyauteries industrielles métalliques - Partie 2: MatériauxMetallische industrielle Rohrleitungen - Teil 2: WerkstoffeThis European Standard was approved by CEN on 23 May 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13480-2:2002 ESIST EN 13480-2:2002
EN 13480-2:2002 (E)Issue 1 (2002-05)2ContentsForeword.31Scope.42Normative references.43Terms, definitions, symbols and units.64Requirements for materials to be used for pressure containing parts in industrial piping.85Requirements for materials to be used for non-pressure parts.13Annex A (normative)
Metallic materials for industrial piping systems – grouping system and Europeanstandardized steels.14Annex B (normative)
Requirements for prevention of brittle fracture.29Annex C (normative)
Provisional technical delivery conditions for clad products for pressurepurposes.49Annex ZA (informative)
Clauses of this European Standard addressing essential safety requirements orother provisions of EU directives.53SIST EN 13480-2:2002
EN 13480-2:2002 (E)Issue 1 (2002-05)3ForewordThis document (EN 13480-2:2002) has been prepared by Technical Committee CEN/TC 267 "Industrial piping andpipelines", the secretariat of which is held by AFNOR.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by November 2002, and conflicting national standards shall be withdrawn at the latestby November 2002.This document has been prepared under a mandate given to CEN by the European Commission and the EuropeanFree Trade Association, and supports essential requirements of EU Directive(s).For relationship with EU Directive(s), see informative annex ZA, which is an integral part of this document.In this standard the Annexes A, B and C are normative.This European Standard EN 13480 for metallic industrial piping consists of seven interdependent and not dissociableParts which are: Part 1: General. Part 2: Materials. Part 3: Design. Part 4: Fabrication and installation. Part 5: Inspection and testing. Part 6: Additional requirement
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.