EN ISO 2812-5:2018

Paints and varnishes - Determination of resistance to liquids - Part 5: Temperature-gradient oven method (ISO 2812-5:2018)

This document specifies a method, using a temperature-gradient oven, for determining the resistance of an individual-layer or multi-layer system of coating materials to the effects of liquids or paste-like products.
This method enables the testers to determine the effects of the test substance on the coating and, if necessary, to assess the damage to the substrate.

Beschichtungsstoffe - Bestimmung der Beständigkeit gegen Flüssigkeiten - Teil 5: Verfahren mit dem Gradientenofen (ISO 2812-5:2018)

Peintures et vernis - Détermination de la résistance aux liquides - Partie 5: Méthode au four à gradient de température (ISO 2812-5:2018)

Le présent document spécifie une méthode utilisant un four à gradient de température pour déterminer la résistance d'un système de revêtement monocouche ou multicouche à l'action de liquides ou de produits pâteux.
Cette méthode permet aux opérateurs de déterminer l'effet de la substance d'essai sur le revêtement et, si nécessaire, d'évaluer la détérioration du subjectile.

Barve in laki - Ugotavljanje odpornosti proti tekočinam - 5. del: Metoda s pečjo s temperaturnim gradientom (ISO 2812-5:2018)

Ta dokument določa metodo s pečjo s temperaturnim gradientom za ugotavljanje odpornosti posamezne plasti ali večplastnih sistemov premazov proti učinkom tekočin ali izdelkov, podobnih pasti.
Ta metoda preskuševalcem omogoča določiti učinke preskušane snovi na premaz in po potrebi oceniti škodo na podlagi.

General Information

• Status: Published
• Publication Date: 11-Sep-2018
• Withdrawal Date: 30-Mar-2019
• ICS: 87.040 - Paints and varnishes
• Technical Committee: CEN/TC 139 - Paints and varnishes
• Drafting Committee: CEN/TC 139 - Paints and varnishes
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 12-Sep-2018
• Completion Date: 12-Sep-2018
• Ref Project: SIST EN ISO 2812-5:2018 - Paints and varnishes - Determination of resistance to liquids - Part 5: Temperature-gradient oven method (ISO 2812-5:2018)

Relations

• Replaces: EN ISO 2812-5:2007 - Paints and varnishes - Determination of resistance to liquids - Part 5: Temperature-gradient oven method (ISO 2812-5:2007)
• Effective Date: 22-Jun-2016

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 2812-5:2018
01-december-2018
1DGRPHãþD
SIST EN ISO 2812-5:2007
%DUYHLQODNL8JRWDYOMDQMHRGSRUQRVWLSURWLWHNRþLQDPGHO0HWRGDVSHþMRV
WHPSHUDWXUQLPJUDGLHQWRP,62
Paints and varnishes - Determination of resistance to liquids - Part 5: Temperature-
gradient oven method (ISO 2812-5:2018)
Beschichtungsstoffe - Bestimmung der Beständigkeit gegen Flüssigkeiten - Teil 5:
Verfahren mit dem Gradientenofen (ISO 2812-5:2018)
Peintures et vernis - Détermination de la résistance aux liquides - Partie 5: Méthode au
four à gradient de température (ISO 2812-5:2018)
Ta slovenski standard je istoveten z: EN ISO 2812-5:2018
ICS:
87.040 Barve in laki Paints and varnishes
SIST EN ISO 2812-5:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 2812-5:2018

---------------------- Page: 2 ----------------------

SIST EN ISO 2812-5:2018


EN ISO 2812-5
EUROPEAN STANDARD

NORME EUROPÉENNE

September 2018
EUROPÄISCHE NORM
ICS 87.040 Supersedes EN ISO 2812-5:2007
English Version

Paints and varnishes - Determination of resistance to
liquids - Part 5: Temperature-gradient oven method (ISO
2812-5:2018)
Peintures et vernis - Détermination de la résistance Beschichtungsstoffe - Bestimmung der Beständigkeit
aux liquides - Partie 5: Méthode au four à gradient de gegen Flüssigkeiten - Teil 5: Verfahren mit dem
température (ISO 2812-5:2018) Gradientenofen (ISO 2812-5:2018)
This European Standard was approved by CEN on 12 August 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 2812-5:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 2812-5:2018
EN ISO 2812-5:2018 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 2812-5:2018
EN ISO 2812-5:2018 (E)
European foreword
This document (EN ISO 2812-5:2018) has been prepared by Technical Committee ISO/TC 35 "Paints
and varnishes" in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2019, and conflicting national standards shall
be withdrawn at the latest by March 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 2812-5:2007.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 2812-5:2018 has been approved by CEN as EN ISO 2812-5:2018 without any
modification.
3

---------------------- Page: 5 ----------------------

SIST EN ISO 2812-5:2018

---------------------- Page: 6 -
...