EN 14351-1:2006+A1:2010/FprA2
(Amendment)Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets
Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets
This European Standard identifies material independent performance characteristics that are applicable to windows (including roof windows, roof windows with external fire resistance and French windows), external pedestrian doorsets (including unframed glass doorsets, escape route doorsets) and screens.
This European Standard applies to:
- Manually or power operated windows, French windows and screens for installation in vertical wall aper-tures and roof windows for installation in inclined roofs, complete with:
- related hardware, if any;
- weather stripping, if any;
- glazed apertures when intended to have glazed apertures;
- with or without incorporated shutters and/or shutterboxes and/or blinds;
and manually or power operated windows, roof windows, French windows and screens that are
- fully or partially glazed including any non-transparent infill;
- fixed or partly fixed or openable with one or more casements/sashes (e.g. hinged, projecting, pivoted, sliding).
- Manually operated external pedestrian doorsets with flush or panelled leaves, complete with:
- integral fanlights, if any;
- adjacent parts that are contained within a single frame for inclusion in a single aperture, if any.
The products covered by this European Standard are not assessed for structural applications.
This European Standard does not apply to:
- windows and pedestrian doorsets subject to regulations on smoke leakage and resistance to fire according to prEN 14351-3 but individual characteristics and performance requirements given in clause 4 can be relevant for these doors and windows (see prEN 14351-3);
- rooflights according to EN 1873 and prEN 14963;
- curtain walling according to EN 13830;
- industrial, commercial and garage doors and gates according to EN 13241-1;
- internal pedestrian doorsets according to prEN 14351-2 but individual characteristics and performance re-quirements given in clause 4 can be relevant for internal doors (see prEN 14351-2);
(....)
Fenster und Türen - Produktnorm, Leistungseigenschaften - Teil 1: Fenster und Außentüren
Fenêtres et portes - Norme produit, caractéristiques de performance - Partie 1 : Fenêtres et blocs portes extérieurs pour piétons
Okna in vrata - Standard za proizvod, zahtevane lastnosti - 1. del: Okna in zunanja vrata
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-maj-2016
Okna in vrata - Standard za proizvod, zahtevane lastnosti - 1. del: Okna in zunanja
vrata
Windows and doors - Product standard, performance characteristics - Part 1: Windows
and external pedestrian doorsets
Fenster und Türen - Produktnorm, Leistungseigenschaften - Teil 1: Fenster und
Außentüren
Fenêtres et portes - Norme produit, caractéristiques de performance - Partie 1 : Fenêtres
et blocs portes extérieurs pour piétons
Ta slovenski standard je istoveten z: EN 14351-1:2006+A1:2010/FprA2
ICS:
91.060.50 Vrata in okna Doors and windows
SIST EN 14351- en,fr,de
1:2006+A1:2010/kFprA2:2016
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
FINAL DRAFT
EUROPEAN STANDARD
EN 14351-
NORME EUROPÉENNE
1:2006+A1:2010
EUROPÄISCHE NORM
FprA2
March 2016
ICS 91.060.50
English Version
Windows and doors - Product standard, performance
characteristics - Part 1: Windows and external pedestrian
doorsets
Fenêtres et portes - Norme produit, caractéristiques de Fenster und Türen - Produktnorm,
performance - Partie 1 : Fenêtres et blocs portes Leistungseigenschaften - Teil 1: Fenster und
extérieurs pour piétons Außentüren
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical
Committee CEN/TC 33.
This draft amendment A2, if approved, will modify the European Standard EN 14351-1:2006+A1:2010. If this draft becomes an
amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
inclusion of this amendment into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14351-
worldwide for CEN national Members. 1:2006+A1:2010/FprA2:2016 E
Contents Page
European foreword . 3
1 Modification to the English title . 4
2 Modification to Clause 1, Scope . 4
3 Modifications to the final Bibliography . 5
European foreword
This document (EN 14351-1:2006+A1:
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.