CEN ISO/TS 14907-1:2005
(Main)Road transport and traffic telematics - Electronic fee collection - Test procedures for user and fixed equipment - Part 1: Description of test procedures (ISO/TS 14907-1:2005)
Road transport and traffic telematics - Electronic fee collection - Test procedures for user and fixed equipment - Part 1: Description of test procedures (ISO/TS 14907-1:2005)
This document specifies the test procedures of EFC road-side equipment (RSE) and on-board equipment (OBE) with regard to the conformance to standards and requirements for type approval and acceptance testing which is within the realm of EFC application specifically.
The scope of this document is restricted to systems operating within the radio emission, EMC regulations, traffic and other regulations of the countries in which they are operated and it is therefore a requirement that all required equipment approvals from an authenticated and accredited test house have been obtained in order to claim compliance.
This document identifies a set of suitable parameter and provides test procedures to enable the proof of a complete EFC system as well as components of an EFC system e.g. OBE related to the defined requirements of an application. The defined parameter and tests are assigned to the following groups of parameter:
- Functionality;
- Quality;
- Referenced pre-tests
An overview of the tests and parameters provided by this document is given in 5.1 and 5.2. OBU conformance testing against EN ISO 14906 (EFC- Application interface definition for DSRC) is covered by CEN ISO/TS 14907-2 (Part 2 of this document).
Telematik für den Straßenverkehr und den Transport - Elektroniesche Gebührenerhebung - Testverfahren für straßenseitige und fahrzeugseitige Einrichtungen - Teil 1: Beschreibung von Testverfahren (ISO/TS 14907-1:2005)
Télématique de la circulation et du transport routier - Perception du télépéage - Modes opératoires relatifs aux équipements embarqués et aux équipements fixes - Partie 1: Description des modes opératoires (ISO/TS 14907-1:2005)
Cestna transportna in prometna telematika – Elektronsko pobiranje pristojbin – Postopki za preskušanje opreme – 1. del: Opis preskuševalnih postopkov (ISO/TS 14907-1:2005)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-2005
1DGRPHãþD
SIST ENV ISO 14907-1:2003
Cestna transportna in prometna telematika – Elektronsko pobiranje pristojbin –
Postopki za preskušanje opreme – 1. del: Opis preskuševalnih postopkov (ISO/TS
14907-1:2005)
Road transport and traffic telematics - Electronic fee collection - Test procedures for
user and fixed equipment - Part 1: Description of test procedures (ISO/TS 14907-1:2005)
Telematik für den Straßenverkehr und den Transport - Elektroniesche
Gebührenerhebung - Testverfahren für straßenseitige und fahrzeugseitige Einrichtungen
- Teil 1: Beschreibung von Testverfahren (ISO/TS 14907-1:2005)
Télématique de la circulation et du transport routier - Perception du télépéage - Modes
opératoires relatifs aux équipements embarqués et aux équipements fixes - Partie 1:
Description des modes opératoires (ISO/TS 14907-1:2005)
Ta slovenski standard je istoveten z: CEN ISO/TS 14907-1:2005
ICS:
35.240.60 Uporabniške rešitve IT v IT applications in transport
transportu in trgovini and trade
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
TECHNICAL SPECIFICATION
CEN ISO/TS 14907-1
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
February 2005
ICS 35.240.60 Supersedes ENV ISO 14907-1:2000
English version
Road transport and traffic telematics - Electronic fee collection -
Test procedures for user and fixed equipment - Part 1:
Description of test procedures (ISO/TS 14907-1:2005)
Télématique de la circulation et du transport routier Telematik für den Straßenverkehr und den Transport -
télépéage - Procédures de test relatives aux équipements Elektroniesche Gebührenerhebung - Testverfahren für
embarqués et aux équipements fixes - Partie 1: Description straßenseitige und fahrzeugseitige Einrichtungen - Teil 1:
des procédures de test (ISO/TS 14907-1:2005) Beschreibung von Testverfahren (ISO/TS 14907-1:2005)
This Technical Specification (CEN/TS) was approved by CEN on 12 April 2004 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN ISO/TS 14907-1:2005: E
worldwide for CEN national Members.
Contents
page
Foreword.4
Introduction.5
1 Scope.6
2 Normative references.9
3 Terms and definitions .9
4 Abbreviations.11
5 Test parameters and test procedures for EFC .12
6 Inspection and tests.23
7 Evaluation and certification .34
Annex A (informative) How to use this Technical Specification .36
A.1 General framework .36
A.2 Step by step guidance.37
Annex B (informative) Traffic, vehicle and other performance tests.38
B.1 Traffic conditions, vehicle characteristics and environmental influences.38
B.2 Traffic conditions.39
B.3 Vehicle characteristics.49
B.4 Environmental influences .57
Annex C (informative) Reliability/availability tests .59
C.1 Overview .59
C.2 Reliability / availability test .61
Annex D (informative) Classes of equipment.65
Annex E (informative) Examples for statistical calculations .67
E.1 Example: The calculation of a quantity from a sample.67
E.2 Statistical considerations when proving low transaction-error rates .68
E.3 MTTF determination.70
Annex F (informative) Examples of referenced pre-tests based on European test
procedures .71
F.1 Dedicated Short-Range Communication (DSRC) .71
F.2 Environment .75
F.3 EMC.77
F.4 Referenced test procedure documents of Annex F.78
Annex G (informative) Test methods and tools .81
G.1 General.81
G.2 Inspection .81
G.3 Simulation .82
G.4 Laboratory tests .83
G.5 Field tests.84
G.6 Exemplary form of a test protocol.86
Annex H (informative) Examples of EFC scenarios .87
H.1 General .87
H.2 Single vehicle test .87
H.3 Bulk vehicle test .89
Bibliography .93
Foreword
This document (CEN ISO/TS 14709-1:2005) has been prepared by Technical Committee CEN/TC 278
"Road Transport and Traffic Telematics", the secretariat of which is held by NEN, in collaboration with
Technical Committee ISO/TC 204 “Intelligent Transport Systems”.
This document supersedes ENV ISO 14907-1:2000.
This document is part of the following series of standards related to testing of electronic fee collection (EFC)
equipment and systems:
— CEN ISO/TS 14907-1, Road transport and traffic telematics – Electronic fee tollection – Test procedures
for user and fixed equipment – Part 1: Description of test procedures (ISO/TS 14907-1:2005)
1)
— CEN ISO/TS 14907-2 , Road transport and traffic telematics – Electronic fee tollection – (EFC) Test
procedures for user and fixed equipment - Part 2: EFC application interface conformance tests
specification
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to announce this CEN Technical Specification: Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.
1)
To be published.
Introduction
For an EFC system, approvals and tests are required to determine whether the system (or individual
modules of the system) conforms to standards and application requirements, and to enable parameters,
such as quality, availability and maintainability, to be measured.
There are complete EFC systems including documentation and approvals available which are possibly in
operation in some countries of Europe. This document provides a toolbox of tests and procedures for the
assessment and proof of such EFC systems that they are suitable for specified EFC applications under
specific operational conditions. Dependent on a system to be tested and based on the available
documentation and the status of already carried out approvals this document enables parties involved e.g.
system provider, operators and test houses to take into consideration already proven references and to
identify such parameters which still have to be tested according to the specified applications.
At the time of drafting this document, the determination of common system requirements for Europe (or any
other region) has not been agreed. This document therefore does not specify any particular performance
requirements unless these are already determined elsewhere (such as safety or radio regulations) but rather
identifies the key parameters which will comprise such requirements. Where reference to an existing test is
available, this document provides that reference. This document defines only the test and test procedures,
not the benchmark figures that these are to be measured against. This document is Part 1 of a series of
standards. This Part 1 describes the test procedures. Part 2 describes EFC OBU conformance test
procedures. Future standards will provide the benchmark figures to which the systems or components under
test must be compared and validated.
This document is furthermore limited to automated (electronic) payment using a standardised dedicated
short-range communication (DSRC). The scope of this document does not include manual payment,
conventional money transaction, nor does it include payment by means of sticker, vignettes, tickets, or
magnetic stripe cards etc. The applications to which EFC is related are Toll Collection, Road Pricing, Parking
and Individual Traffic Information.
This is an enabling document to enable groups of operators to determine common specific performance
levels and operating conditions, and to enable regional variation where appropriate. It provides operating and
environmental parameters (or classes of operating and environmental parameters) within which such
systems shall successfully function without impairing interoperability to ensure that the person specified the
system can state his requirements clearly to
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.