EN ISO 14172:2003

Welding consumables - Covered electrodes for manual metal arc welding of nickel and nickel alloys - Classification (ISO 14172:2003)

This standard specifies requirements for the classification of nickel and nickel alloy covered electrodes for shielded metal arc welding and overlaying.  The standard includes those compositions in which the nickel content exceeds that of any other element.

Schweißzusätze - Umhüllte Stabelektroden zum Lichtbogenhandschweißen von Nickel und Nickellegierungen - Einteilung (ISO 14172:2003)

Diese Internationale Norm beschreibt die Anforderungen für die Einteilung von umhüllten Stabelektroden aus Nickel und Nickellegierungen zum Lichtbogenhandschweißen und zum Schweißplattieren. Die Norm schließt solche Zusammensetzungen ein, bei denen Nickel den größten Einzelgehalt aufweist.

Produits consommables pour le soudage - Electrodes enrobées pour le soudage manuel à l'arc du nickel et des alliages de nickel - Classification (ISO 14172:2003)

IEC 61375-2-8:2021 s'applique à l'ensemble des équipements et dispositifs mis en œuvre conformément à l'IEC 61375-2-3:2015, l'IEC 61375-2-5:2014 et l'IEC 61375-3-4:2014, c'est-à-dire qu'elle couvre les modes opératoires à appliquer à ces équipements et dispositifs dont il convient de démontrer la conformité.

Dodajni materiali za varjenje - Oplaščene elektrode za ročno obločno varjenje niklja in nikljevih zlitin - Razvrstitev (ISO 14172:2003)

General Information

• Status: Withdrawn
• Publication Date: 14-Nov-2003
• Withdrawal Date: 14-Oct-2008
• ICS: 25.160.20 - Welding consumables
• Technical Committee: CEN/TC 121 - Welding
• Drafting Committee: CEN/TC 121/WG 3 - Welding consumables
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 15-Oct-2008
• Completion Date: 15-Oct-2008
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN ISO 14172:2004 - Welding consumables - Covered electrodes for manual metal arc welding of nickel and nickel alloys - Classification (ISO 14172:2003)

Relations

• Replaced By: EN ISO 14172:2008 - Welding consumables - Covered electrodes for manual metal arc welding of nickel and nickel alloys - Classification (ISO 14172:2008)
• Effective Date: 22-Dec-2008
• Corrected By: EN ISO 14172:2003/AC:2006 - Welding consumables - Covered electrodes for manual metal arc welding of nickel and nickel alloys - Classification (ISO 14172:2003/Cor.1:2004 and ISO 14172:2003/Cor.2:2005)
• Effective Date: 22-Dec-2008
• Corrected By: EN ISO 14172:2003/AC:2005 - Welding consumables - Covered electrodes for manual metal arc welding of nickel and nickel alloys - Classification (ISO 14172:2003)
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 14172:2004
01-junij-2004
'RGDMQLPDWHULDOL]DYDUMHQMH2SODãþHQHHOHNWURGH]DURþQRREORþQRYDUMHQMH
QLNOMDLQQLNOMHYLK]OLWLQ5D]YUVWLWHY,62
Welding consumables - Covered electrodes for manual metal arc welding of nickel and
nickel alloys - Classification (ISO 14172:2003)
Schweißzusätze - Umhüllte Stabelektroden zum Lichtbogenhandschweißen von Nickel
und Nickellegierungen - Einteilung (ISO 14172:2003)
Produits consommables pour le soudage - Electrodes enrobées pour le soudage manuel
a l'arc du nickel et des alliages de nickel - Classification (ISO 14172:2003)
Ta slovenski standard je istoveten z: EN ISO 14172:2003
ICS:
25.160.20 Potrošni material pri varjenju Welding consumables
SIST EN ISO 14172:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 14172:2004

---------------------- Page: 2 ----------------------

SIST EN ISO 14172:2004
EUROPEAN STANDARD
EN ISO 14172
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2003
ICS 25.160.20
English version
Welding consumables - Covered electrodes for manual metal
arc welding of nickel and nickel alloys - Classification (ISO
14172:2003)
Produits consommables pour le soudage - Electrodes Schweißzusätze - Umhüllte Stabelektroden zum
enrobées pour le soudage manuel à l'arc du nickel et des Lichtbogenhandschweißen von Nickel und
alliages de nickel - Classification (ISO 14172:2003) Nickellegierungen - Einteilung (ISO 14172:2003)
This European Standard was approved by CEN on 25 September 2003.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2003 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 14172:2003 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 14172:2004
EN ISO 14172:2003 (E)
CORRECTED 2003-12-17
Foreword
This document (EN ISO 14172:2003) has been prepared by Technical Committee ISO/TC 44
"Welding and allied processes" in collaboration with Technical Committee CEN/TC 121
"Welding", the secretariat of which is held by DS.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by May 2004, and conflicting national standards
shall be withdrawn at the latest by May 2004.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium, Czech
Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and
the United Kingdom.
Endorsement notice
The text of ISO 14172:2003 has been approved by CEN as EN ISO 14172:2003 without any
modifications.
NOTE Normative references to International Standards are listed in Annex ZA (normative).
2

---------------------- Page: 4 ----------------------

SIST EN ISO 14172:2004
EN ISO 14172:2003 (E)
Annex ZA
(normative)
Normative references to international publications
with their relevant European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of
any of these publications apply to this European Standard only when incorporated in it by
amendment or revision. For undated references the latest edition of the publication referred to
applies (including amendments).
NOTE Where an International Publication has been modified by common modifications, indicated
by (mod.), the relevant EN/HD applies.
Publication Year Title EN Year
ISO 544 2003 Welding consumables - EN ISO 544 2003
Technical deliver
...