Wash basins - Connecting dimensions

This European Standard specifies the connecting dimensions of wash basins in accordance with EN 14688 regardless of materials used for their manufacture.
NOTE 1   Other connecting dimensions are permitted, e.g. special designs of wash basins, if the manufacturer supplies or recommends the appropriate fitting.
NOTE 2   The shape of the appliance in the figures is for illustration only; it in no way prejudices the final shape of the appliance, which is left to the initiative of the manufacturer.

Waschbecken - Anschlussmaße

Diese Europäische Norm legt Anschlussmaße für Waschbecken nach EN 14688, unabhängig vom für ihre Herstellung verwendeten Werkstoff, fest. ANMERKUNG 1 Andere Anschlussmaße sind zulässig, z. B. für spezielle Ausführungen von Waschbecken, wenn der Hersteller eine geeignete Ablaufgarnitur mitliefert oder empfiehlt. ANMERKUNG 2 Die in den Bildern dargestellte Form der Gegenstände wurde nur für das bessere Verständnis gewählt; sie schreibt nicht die endgültige Form der Gegenstände vor, die der Wahl des Herstellers überlassen bleibt.

Lavabos - Cotes de raccordement

La présente Norme Européenne spécifie les cotes de raccordement des lavabos conforme à EN 14688, quels
que soient les matériaux entrants dans leur fabrication.
NOTE 1 D’autres cotes de raccordement sont possibles, dans le cas, par exemple, de conceptions particulières de
lavabos, si le fabricant fournit ou recommande les dispositifs de robinetterie appropriés.
NOTE 2 La forme des appareils représentés sur les figures est donnée uniquement à titre d’illustration ; elle ne préjuge
en rien de la forme définitive de l’appareil qui est laissée à l’initiative du fabricant.

Umivalniki - Priključne mere

Ta evropski standard določa priključne mere umivalnikov v skladu z EN 14688, ne glede na uporabljene materiale za njihovo izdelavo.

General Information

Publication Date
Withdrawal Date
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
Completion Date


Buy Standard

EN 31:2011
English language
13 pages
sale 10% off
sale 10% off
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Waschbecken - AnschlussmaßeLavabos - Cotes de raccordementWash basins - Connecting dimensions91.140.70Sanitarne napraveSanitary installationsICS:Ta slovenski standard je istoveten z:EN 31:2011SIST EN 31:2011en,fr,de01-november-2011SIST EN 31:2011SLOVENSKI
STANDARDSIST EN 31:2000SIST EN 32:2000SIST EN 111:2003SIST EN 31:1998/A1:19981DGRPHãþD

SIST EN 31:2011

EN 31
September 2011 ICS 91.140.70 Supersedes EN 111:2003, EN 31:1998, EN 32:1998English Version
Wash basins - Connecting dimensions
Lavabos - Cotes de raccordement
Waschbecken - Anschlussmaße This European Standard was approved by CEN on 29 July 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 31:2011: ESIST EN 31:2011

EN 31:2011 (E) 2 Contents Page Foreword .31 Scope .42 Normative references .43 Tap holes .43.1 General .43.2 Connecting dimensions of wash basins with one central tap hole .43.3 Connecting dimensions of wash basins with side tap hole(s) .63.4 Connecting dimensions of wash basins with three tap holes .74 Waste outlet hole(s) .94.1 Connecting dimensions of waste outlet hole(s) with integral overflow.94.2 Connecting dimensions of waste outlet hole without integral overflow . 105 Fixing dimensions of wall-hung wash basins . 11Annex A (informative)
Example of gauge for measuring the connecting dimensions of waste outlet holes . 13 SIST EN 31:2011

EN 31:2011 (E) 3 Foreword This document (EN 31:2011) has been prepared by Technical Committee CEN/TC 163 “Sanitary appliances”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2012, and conflicting national standards shall be withdrawn at the latest by March 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 31:1998, EN 32:1998, EN 111:2003. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.