EN 2119:2017

Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) - Solution treated and precipitation treated - Wires for rivets - 2 mm ≤ D ≤ 10 mm - Rm ≥ 960 MPa

This European Standard specifies the requirements relating to:
Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15)
Solution treated and precipitation treated
Wires for rivets
2 mm ≤ D ≤ 10 mm
Rm ≥ 960 MPa
for aerospace applications.

Luft- und Raumfahrt - Hochwarmfeste Legierung FE-PA2601 (X6NiCrTiMoV26-15) - Lösungsgeglüht und ausgehärtet - Drahte für Niete - 2 mm ≤ D ≤ 10 mm - Rm ≥ 960 MPa

Série aérospatiale - Acier résistant à chaud FE-PA2601 (X6NiCrTiMoV26-15) - Mis en solution et précipité - Fils pour rivets - 2 mm ≤ D ≤ 10 mm - Rm ≥ 960 MPa

Aeronavtika - Toplotno odporna zlitina FE-PA2601 (X6NiCrTiMoV26-15) - Topilno žarjena in izločevalno utrjena - Žice za kovice - 2 mm ≤ D ≤ 10 mm - Rm ≥ 960 MPa

General Information

• Status: Published
• Publication Date: 12-Dec-2017
• Withdrawal Date: 29-Jun-2018
• ICS: 49.025.05 - Ferrous alloys in general
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 4 - Metallic
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 13-Dec-2017
• Completion Date: 13-Dec-2017
• Ref Project: SIST EN 2119:2018 - Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) - Solution treated and precipitation treated - Wires for rivets - 2 mm ≤ D ≤ 10 mm - Rm ≥ 960 MPa

Standards Content (Sample)

SLOVENSKI STANDARD
01-marec-2018
$HURQDYWLND7RSORWQRRGSRUQD]OLWLQD)(3$;1L&U7L0R97RSLOQR
åDUMHQDLQL]ORþHYDOQRXWUMHQDäLFH]DNRYLFHPP”'”PP5P•03D
$HURVSDFHVHULHV+HDWUHVLVWLQJDOOR\)(3$;1L&U7L0R96ROXWLRQ
WUHDWHGDQGSUHFLSLWDWLRQWUHDWHG:LUHVIRUULYHWVPP”'”PP5P•03D
/XIWXQG5DXPIDKUW+RFKZDUPIHVWH/HJLHUXQJ)(3$;1L&U7L0R9
/|VXQJVJHJOKWXQGDXVJHKlUWHW'UDKWHIU1LHWHPP”'”PP5P•
03D
6pULHDpURVSDWLDOH$FLHUUpVLVWDQWjFKDXG)(3$;1L&U7L0R90LVHQ
VROXWLRQHWSUpFLSLWp)LOVSRXUULYHWVPP”'”PP5P•03D
Ta slovenski standard je istoveten z: EN 2119:2017
ICS:
49.025.05 Železove zlitine na splošno Ferrous alloys in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 2119
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2017
EUROPÄISCHE NORM
ICS 49.025.05
English Version
Aerospace series - Heat resisting alloy FE-PA2601
(X6NiCrTiMoV26-15) - Solution treated and precipitation
treated - Wires for rivets - 2 mm ≤ D ≤ 10 mm - Rm ≥ 960
MPa
Série aérospatiale - Acier résistant à chaud FE-PA2601 Luft- und Raumfahrt - Hochwarmfeste Legierung FE-
(X6NiCrTiMoV26-15) - Mis en solution et précipité - PA2601 (X6NiCrTiMoV26-15) - Lösungsgeglüht und
Fils pour rivets - 2 mm ≤ D ≤ 10 mm - Rm ≥ 960 MPa ausgehärtet - Drahte für Niete - 2 mm ≤ D ≤ 10 mm -
Rm ≥ 960 MPa
This European Standard was approved by CEN on 11 September 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2119:2017 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Requirements . 5

European foreword
This document (EN 2119:2017) has been prepared by the Aerospace and Defence Industries Association
of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2018 and conflicting national standards shall be
withdrawn at the latest by June 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any
...