EN ISO 14064-1:2019/prA1

Greenhouse gases - Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals - Amendment 1 (ISO 14064 1:2018/DAM 1:2024)

Treibhausgase - Teil 1: Spezifikation mit Anleitung zur quantitativen Bestimmung und Berichterstattung von Treibhausgasemissionen und Entzug von Treibhausgasen auf Organisationsebene - Änderung 1 (ISO 14064 1:2018/DAM 1:2024)

Gaz à effet de serre - Partie 1: Spécifications et lignes directrices, au niveau des organismes, pour la quantification et la déclaration des émissions et des suppressions des gaz à effet de serre - Amendement 1 (ISO 14064 1:2018/DAM 1:2024)

Toplogredni plini - 1. del: Specifikacija z navodilom za količinsko določanje in poročanje o emisijah in odstranjevanju toplogrednih plinov na ravni organizacije - Dopolnilo A1

General Information

• Status: Not Published
• Publication Date: 25-Nov-2025
• ICS: 13.020.40 - Pollution, pollution control and conservation
• Technical Committee: CEN/SS S26 - Environmental Management
• Current Stage: 4020 - Submission to enquiry - Enquiry
• Start Date: 02-May-2024
• Completion Date: 02-May-2024
• Directive: 765/2008 - REGULATION (EC) No 765/2008 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 9 July 2008 setting out the requirements for accreditation and market surveillance relating to the marketing of products and repealing Regulation (EEC) No 339/93
• Mandate: M/417 - Standardisation mandate addessed to CEN, CENELEC, and ETSI for the use of Harmonised Standards in support of the new legal framework and sectoral certification schemes
• Mandate: M/580 - Standardisation request to the European Committee for Standardisation and the European Committee for Electrotechnical Standardisation in the area of accreditation and conformity assessment
• Ref Project: SIST EN ISO 14064-1:2019/oprA1:2024 - Greenhouse gases — Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals — Amendment 1

Relations

• Amends: EN ISO 14064-1:2019 - Greenhouse gases - Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals (ISO 14064-1:2018)
• Effective Date: 25-Oct-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-junij-2024
Toplogredni plini - 1. del: Specifikacija z navodilom za količinsko določanje in
poročanje o emisijah in odstranjevanju toplogrednih plinov na ravni organizacije -
Dopolnilo A1
Greenhouse gases — Part 1: Specification with guidance at the organization level for
quantification and reporting of greenhouse gas emissions and removals — Amendment 1
Treibhausgase - Teil 1: Spezifikation mit Anleitung zur quantitativen Bestimmung und
Berichterstattung von Treibhausgasemissionen und Entzug von Treibhausgasen auf
Organisationsebene
Gaz à effet de serre — Partie 1: Spécifications et lignes directrices, au niveau des
organismes, pour la quantification et la déclaration des émissions et des suppressions
des gaz à effet de serre — Amendement 1
Ta slovenski standard je istoveten z: EN ISO 14064-1:2019/prA1
ICS:
13.020.40 Onesnaževanje, nadzor nad Pollution, pollution control
onesnaževanjem in and conservation
ohranjanje
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
Amendment
ISO 14064-1:2018/
DAM 1
ISO/TC 207/SC 7
Greenhouse gases —
Secretariat: SCC
Part 1:
Voting begins on:
Specification with guidance at the
2024-05-02
organization level for quantification
Voting terminates on:
and reporting of greenhouse gas 2024-07-25
emissions and removals
AMENDMENT 1
Gaz à effet de serre —
Partie 1: Spécifications et lignes directrices, au niveau des
organismes, pour la quantification et la déclaration des émissions
et des suppressions des gaz à effet de serre
AMENDEMENT 1
ICS: 13.020.40
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO 14064-1:2018/DAM 1:2024(en)
DRAFT
ISO 14064-1:2018/DAM 1:2024(en)
Amendment
ISO 14064-1:2018/
DAM 1
ISO/TC 207/SC 7
Greenhouse gases —
Secretariat: SCC
Part 1:
Voting begins on:
Specification with guidance at the
organization level for quantification
Voting terminates on:
and reporting of greenhouse gas
emissions and removals
AMENDMENT 1
Gaz à effet de serre —
Partie 1: Spécifications et lignes directrices, au niveau des
organismes, pour la quantification et la déclaration des émissions
et des suppressions des gaz à effet de serre
AMENDEMENT 1
ICS: 13.020.40
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2024
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: [phone]
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: [e-mail]
Website: www.iso.org
Published in Switzerland Reference number
ISO 14064-1:2018/DAM 1:2024(en)
ii
ISO 14064-1:2018/DAM 1:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent
rights identified during the development of the document will be in the Introduction and/or on the ISO list of
patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 207, Environmental  management,
Subcommittee SC 07, Greenhouse gas and climate change management and related activities.
A list of all parts in the ISO 14064 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.

iii
ISO 14064-1:2018/DAM 1:2024(en)
Greenhouse gases —
Part 1:
Specification with guidance at the organization level for
quantification and reporting of greenhouse gas emissions and
removals
AMENDMENT 1
Subclause 3.2
The following new term and definition is added:
3.2  Terms relating to GHG inventory
3.2.15
avoided emission: estimated difference in life cycle GHG emissions arising from a scenario with a
solution compared to a reference scenario without the solution when reference scenario emissions
are higher.
Note 1: A solution can be a good ,a service, a policy, a project, an innovation.
Note 2: Solutions can lead to actual reductions of emissions or simply less emissions than would happen
without the solution.
Note 3: For organization, avoided emissions are aggregated estimated differences in life cycle GHG emissions
arising from the solutions offered by the reporting organization compared to a reference scenarios when
reference scenarios emissions are higher.
Alternative Note 3: For organization, avoided emissions happen outside the organizational boundaries of the
reporting organization and have to be considered at aggregated level.
[Note of Secretariat: you are invited to choose between the two Note 3 alternatives]

A new Annex I (informative) Avoided emissions is added as hereafter.

ISO 14064-1:201
...