EN 18001:2024
(Main)Curtain walling - Environmental product declarations - Product category rules for curtain walling
Curtain walling - Environmental product declarations - Product category rules for curtain walling
This document provides product category rules (PCR) for Type III environmental declarations for curtain walling as defined in EN 13830:2015+A1:2020, excluding openable infills. Openable infills are addressed in EN 17213:2020.
This document complements the core rules for the product category of construction products as defined in EN 15804:2012+A2:2019. This document complements EN 15804:2012+A2:2019 and does not replace it.
NOTE The assessment of social and economic performances at product level is not covered by this document.
The core PCR:
- defines the parameters to be declared and the way in which they are collated and reported;
- describes which stages of a product’s life cycle are considered in the EPD and which processes are to be included in the life cycle stages;
- defines rules for the development of scenarios;
- includes the rules for calculating the life cycle inventory and the life cycle impact assessment underlying the EPD, including the specification of the data quality to be applied;
- includes the rules for reporting the predetermined, environmental and health information that is not covered by life cycle assessment (LCA) for the product, construction process(es) and construction service(s), as relevant;
- defines the conditions under which construction products can be compared based on the information provided by EPD.
For the EPD of construction services the same rules and requirements apply as for the EPD of construction products.
Vorhangfassaden - Umweltproduktdeklarationen - Produktkategorieregeln für Vorhangfassaden
Dieses Dokument liefert Produktkategorieregeln (PCR) für Typ-III-Umweltdeklarationen für Vorhangfassaden nach EN 13830:2015+A1:2020 ohne zu öffnende Ausfachungen. Zu öffnende Ausfachungen werden nach EN 17213:2020 behandelt.
Dieses Dokument ergänzt die Grundregeln für die Produktkategorie Bauprodukte nach EN 15804:2012+A2:2019. Dieses Dokument ergänzt die Norm EN 15804:2012+A2:2019 und ersetzt sie nicht.
ANMERKUNG Die Beurteilung der sozialen und ökonomischen Qualität auf Produktebene ist nicht Gegenstand dieses Dokuments.
Die grundlegenden Produktkategorieregeln:
- definieren die zu deklarierenden Parameter und die Art, wie sie auf Vollständigkeit überprüft und kommuniziert werden;
- beschreiben, welche Phasen des Lebenszyklus eines Produkts in der EPD berücksichtigt werden und welche Prozesse in die Lebenszyklusphasen einzubeziehen sind;
- definieren die Regeln für die Entwicklung von Szenarien;
- beinhalten die Regeln zur Berechnung der Sachbilanz und der Wirkungsabschätzung, die einer EPD zugrunde liegen, einschließlich der Festlegung der zu verwendenden Datenqualität;
- beinhalten die Regeln für die Kommunikation der vordefinierten Umwelt- und Gesundheitsinformationen, die für das Bauprodukt, den/die Bauprozess(e) und die Bauleistung(en) nicht von einer Ökobilanz (LCA, en: life cycle assessment) abgedeckt sind, soweit maßgeblich;
- definieren die Bedingungen, unter welchen Bauprodukte auf der Basis der Informationen aus den EPD verglichen werden können.
Für die EPD von Bauleistungen gelten dieselben Regeln und Anforderungen wie für die EPD von Bauprodukten.
Façade rideau - Déclarations environnementales des produits - Règles de définition des catégories de produits pour façade rideau
Le présent document fournit les règles de définition des catégories de produits pour les déclarations environnementales de Type III relatives aux façades rideaux, conformément à l’EN 13830:2015+A1:2020, sauf pour les remplissages ouvrants. Les remplissages ouvrants sont traités dans l’EN 17213:2020.
Le présent document complète les règles régissant les catégories de produits de construction, conformément à l’EN 15804:2012+A2:2019. Il vient en complément de l’EN 15804:2012+A2:2019 mais ne le remplace pas.
NOTE L’évaluation des performances sociales et économiques au niveau d’un produit n’est pas traitée dans le présent document.
Les règles régissant les catégories de produits :
- définissent les paramètres à déclarer et la manière dont ils sont regroupés et consignés ;
- décrivent les étapes du cycle de vie d’un produit prises en compte dans la DEP ainsi que les processus à inclure dans les étapes du cycle de vie ;
- établissent les règles relatives à l’élaboration de scénarios ;
- intègrent les règles de calcul de l’inventaire du cycle de vie et de l’évaluation de l’impact du cycle de vie servant de base à la DEP, y compris la spécification de la qualité des données à appliquer ;
- incluent les règles de communication d’informations environnementales et sanitaires prédéterminées, qui ne sont pas couvertes par l’analyse du cycle de vie (ACV), pour un produit et un ou des processus et service(s) de construction, le cas échéant ;
- posent les conditions dans lesquelles les produits de construction peuvent être comparés, sur la base des informations fournies par la DEP.
Les règles et les exigences applicables à la DEP des services de construction sont les mêmes que pour la DEP des produits de construction.
Obešene fasade - Okoljske deklaracije za proizvode - Pravila za kategorije za obešene fasade
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 18001:2023
01-december-2023
Obešene fasade - Okoljske deklaracije za proizvode - Pravila za kategorije za
obešene fasade
Curtain walling - Environmental Product Declarations - Product category rules for curtain
walling
Vorhangfassade - Umweltproduktdeklarationen - Produktkategorieregeln für
Vorhangfassade
Façade rideau - Déclarations environnementales des produits - Règles de définition des
catégories de produits pour façade rideau
Ta slovenski standard je istoveten z: prEN 18001
ICS:
13.020.20 Okoljska ekonomija. Environmental economics.
Trajnostnost Sustainability
91.060.10 Stene. Predelne stene. Walls. Partitions. Facades
Fasade
oSIST prEN 18001:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
oSIST prEN 18001:2023
oSIST prEN 18001:2023
DRAFT
EUROPEAN STANDARD
prEN 18001
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2023
ICS
English Version
Curtain walling - Environmental Product Declarations -
Product category rules for curtain walling
Façade rideau - Déclarations environnementales de Vorhangfassade - Umweltproduktdeklarationen -
produits - Règles de définition des catégories de Produktkategorieregeln für Vorhangfassade
produits pour Façade rideau
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 33.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 18001:2023 E
worldwide for CEN national Members.
oSIST prEN 18001:2023
prEN 18001:2023 (E)
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4 Symbols and abbreviated terms . 7
5 General aspects . 7
5.1 Objective of this PCR . 7
5.2 Types of EPD with respect to life cycle stages covered . 8
5.3 Comparability of EPD for construction products . 8
5.4 Additional environmental information . 8
5.5 Ownership, responsibility and liability for the EPD. 8
5.6 Communication formats . 9
6 Product Category Rules for LCA . 9
6.1 Product category . 9
6.2 Life cycle stages and their information modules to be included . 9
6.3 Calculation rules for the LCA . 9
6.4 Inventory analysis . 12
6.5 Impact assessment . 13
7 Content of the EPD . 13
7.1 Declaration of general information. 13
7.2 Declaration of environmental indicators derived from LCA . 13
7.3 Scenarios and additional technical information . 14
7.4 Additional information on release of dangerous substances to indoor air, soil and water
during the use stage . 14
7.5 Aggregation of information modules . 14
8 Project report . 14
8.1 General. 14
8.2 LCA-related elements of the project report. 14
8.3 Documentation on additional information . 14
8.4 Data availability for verification . 15
9 Verification and validity of an EPD . 15
Annex A (normative) Requirements and guidance on the reference service life . 16
Annex B (informative) Waste . 17
Annex C (normative) Characterization factors for GWP, ODP, AP, EP, POCP and ADP . 18
Annex D (informative) End of life formulae . 19
Annex E (informative) Schemes to be applied for data quality assessment of generic and specific
data . 20
Annex F (normative) Reference product . 21
oSIST prEN 18001:2023
prEN 18001:2023 (E)
F.1 General . 21
F.2 Configuration reference product . 21
F.3 Representative products within a product range . 22
Annex G (informative) Default transport, installation, use stage and End-of-life scenarios . 23
G.1 General . 23
G.2 Transport and installation . 23
G.3 B use stage . 24
G.4 End-of-life . 24
Bibliography . 27
oSIST prEN 18001:2023
prEN 18001:2023 (E)
European foreword
This document (prEN 18001:2023) has been prepared by Technical Committee CEN/TC 33 “Doors,
windows, shutters, building hardware and curtain walling”, the secretariat of which is held by AFNOR.
This document is currently submitted to the CEN Enquiry.
oSIST prEN 18001:2023
prEN 18001:2023 (E)
Introduction
This document provides core product category rules for all construction products and services. It
provides a structure to ensure that all Environmental Product Declarations (EPD) of construction
products, construction services and construction processes are derived, verified and presented in a
harmonized way.
This document provides complementary product category rules (cPCR) for Type III Environmental
Declarations (EPD) specifically for curtain walling.
An EPD communicates verifiable, accurate, non-misleading environmental information for products and
their applications, thereby supporting scientifically based, fair choices and stimulating the potential for
market-driven continuous environmental improvement.
The standardization process has taken place in accordance with EN ISO 14025. All common issues for
curtain walling are covered horizontally in order to minimize intra-sectorial deviations.
EPD information is expressed in information modules, which allow easy organization and expression of
data packages throughout the lifecycle of the product. The approach requires that the underlying data
should be consistent, reproducible and comparable.
The EPD is expressed in a form that allows aggregation (addition) to provide complete information for
buildings. Neither EN 15804:2012+A2:2019 nor this document deals with aggregation at the building
level or describes the rules for applying EPD in building assessment.
This document deals with a limited number of quantifiable predetermined parameters as defined in
EN 15804:2012+A2:2019. Future revisions may incorporate additional predetermined parameters.
This document provides the means for developing a Type III environmental declaration for curtain
walling, thereby supplementing the suite of standards that are intended to assess the sustainability of
construction works.
This suite of standards includes:
— EN 15643, Sustainability of construction works — Framework for assessment of buildings and civil
engineering works;
— EN 15804:2012+A2:2019, Sustainability of construction works — Environmental product declarations
— Core rules for the product category of construction products;
— CEN/TR 15941, Sustainability of construction works — Environmental product declarations —
Methodology for selection and use of generic data;
— EN 15942, Sustainability of construction works — Environmental product declarations —
Communication formats: business to business;
— EN 15978, Sustainability of construction works — Assessment of environmental performance of
buildings — Calculation method.
oSIST prEN 18001:2023
prEN 18001:2023 (E)
1 Scope
This document provides product category rules (PCR) for Type III environmental declarations for curtain
walling as defined in EN 13830:2015+A1:2020, excluding openable infills. Openable infills are addressed
according to EN 17213:2020.
This document complements the core rules for the product category of construction products as defined
in EN 15804:2012+A2:2019. This document complements EN 15804:2012+A2:2019 and do not replace
it.
NOTE The assessment of social and economic performances at product level is not covered by this document.
The core PCR:
— defines the parameters to be declared and the way in which they are collated and reported;
— describes which stages of a product’s life cycle are considered in the EPD and which processes are to
be included in the life cycle stages;
— defines rules for the development of scenarios;
— includes the rules for calculating the Life Cycle Inventory and the Life Cycle Impact Assessment
underlying the EPD, including the specification of the data quality to be applied;
— includes the rules for reporting the predetermined, environmental and health information that is not
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.