Explosives for civil uses - Detonators and detonating cord relays - Part 3: Determination of sensitiveness to impact

This document specifies methods for determination of the sensitiveness to impact for plain detonators, electric detonators, non-electric detonators, electronic detonators, surface connectors, detonating cord relays and shock tubes used with electronic and non-electric detonators.
This document applies to explosives for civil uses.

Explosivstoffe für zivile Zwecke - Zünder und Sprengschnurverbinder - Teil 3: Bestimmung der Schlagempfindlichkeit

Dieses Dokument legt Verfahren für die Bestimmung der Empfindlichkeit gegenüber Schlag von Sprengkapseln, elektrischen Zündern, nichtelektrischen Zündern, elektronischen Zündern, Oberflächenverbindern, Sprengschnurverzögerern und Zündschläuchen zur Verwendung mit elektronischen und nichtelektronischen Zündern fest.
Dieses Dokument ist anzuwenden für Explosivstoffe für zivile Zwecke.

Explosifs à usage civil - Détonateurs et relais pour cordeau détonant - Partie 3 : Détermination de la sensibilité au choc

Le présent document spécifie une méthode de détermination de la sensibilité au choc des détonateurs pyrotechniques, des détonateurs électriques, des détonateurs non électriques, des détonateurs électroniques, des connecteurs de surface, des relais pour cordeau détonant ainsi que des tubes à transmission d’onde de choc utilisés avec des détonateurs non électriques et électroniques.
Le présent document s’applique aux explosifs à usage civil.

Eksplozivi za civilno uporabo – Detonatorji in zakasnilniki – 3. del: Ugotavljanje občutljivosti na udarec

General Information

Status
Not Published
Publication Date
28-Jul-2024
Current Stage
4599 - Dispatch of FV draft to CMC - Finalization for Vote
Start Date
15-Dec-2023
Due Date
16-Dec-2021
Completion Date
15-Dec-2023

Relations

Buy Standard

Draft
prEN 13763-3:2021
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 13763-3:2021
01-april-2021
Eksplozivi za civilno uporabo – Detonatorji in zakasnilniki – 3. del: Ugotavljanje
občutljivosti na udarec
Explosives for civil uses - Detonators and relays - Part 3: Determination of sensitiveness
to impact
Explosivstoffe für zivile Zwecke - Zünder und Verzögerungselemente - Teil 3:
Bestimmung der Schlagempfindlichkeit
Explosifs à usage civil - Détonateurs et relais - Partie 3: Détermination de la sensibilité
au choc
Ta slovenski standard je istoveten z: prEN 13763-3
ICS:
71.100.30 Eksplozivi. Pirotehnika in Explosives. Pyrotechnics and
ognjemeti fireworks
oSIST prEN 13763-3:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 13763-3:2021

---------------------- Page: 2 ----------------------
oSIST prEN 13763-3:2021


DRAFT
EUROPEAN STANDARD
prEN 13763-3
NORME EUROPÉENNE

EUROPÄISCHE NORM

April 2021
ICS 71.100.30 Will supersede EN 13763-3:2002
English Version

Explosives for civil uses - Detonators and detonating cord
relays - Part 3: Determination of sensitiveness to impact
Explosifs à usage civil - Détonateurs et relais pour Explosivstoffe für zivile Zwecke - Zünder und
cordeau détonant - Partie 3: Détermination de la Sprengschnurverbinder - Teil 3: Bestimmung der
sensibilité au choc Schlagempfindlichkeit
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 321.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13763-3:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 13763-3:2021
prEN 13763-3:2021 (E)
Contents Page
European foreword . 3
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Principle . 6
5 Apparatus . 7
5.1 General. 7
5.2 Impact testing apparatus . 7
)
6 Preparation and handling of test samples and test pieces . 8
6.1 Handling of test samples .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.