EN ISO 19111-2:2012

Geographic information - Spatial referencing by coordinates - Part 2: Extension for parametric values (ISO 19111-2:2009)

ISO 19111-2:2009 specifies the conceptual schema for the description of spatial referencing using parametric values or functions. It applies the schema of ISO 19111 to combine a position referenced by coordinates with a parametric value to form a spatio‑parametric coordinate reference system (CRS). The spatio‑parametric CRS can optionally be extended to include time.
The intended users of ISO 19111-2:2009 are producers and users of environmental information.
Parameters which are attributes of spatial locations or features, but which are not involved in their spatial referencing, are not addressed by ISO 19111-2:2009.

Geoinformation - Koordinatenreferenzsysteme - Teil 2: Erweiterung auf parametrisierte Werte (ISO 19111-2:2009)

Information géographique - Système de références spatiales par coordonnées - Partie 2: Supplément pour valeurs paramétriques (ISO 19111-2:2009)

Geografske informacije - Lociranje s koordinatami - 2. del: Razširitev za parametrične vrednosti (ISO 19111-2:2009)

Ta del standarda ISO 19111 določa zasnovno shemo za opis lociranja s parametričnimi vrednostmi ali funkcijami. Shemo standarda ISO 19111 uporablja za združevanje položaja, določenega s koordinatami s parametrično vrednostjo, za oblikovanje prostorsko-parametričnega koordinatnega referenčnega sistema (CRS). Prostorsko-parametrični koordinatni referenčni sistem se po izbiri lahko razširi in vključuje še čas. Ciljni uporabniki tega dela standarda ISO 19111 so izdelovalci in uporabniki okoljskih informacij. Parametrov, ki so atributi prostorskih lokacij ali lastnosti, vendar niso zajeti v njihovo lociranje, ta del standarda ISO 19111 ne obravnava.

General Information

• Status: Withdrawn
• Publication Date: 03-Apr-2012
• Withdrawal Date: 17-Mar-2020
• ICS: 35.240.70 - IT applications in science
• Technical Committee: CEN/TC 287 - Geographic Information
• Drafting Committee: CEN/TC 287 - Geographic Information
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 18-Mar-2020
• Ref Project: SIST EN ISO 19111-2:2012 - Geographic information - Spatial referencing by coordinates - Part 2: Extension for parametric values (ISO 19111-2:2009)

Relations

• Replaced By: EN ISO 19111:2020 - Geographic information - Referencing by coordinates (ISO 19111:2019)
• Effective Date: 24-Mar-2020

Standards Content (Sample)

SLOVENSKI STANDARD
01-junij-2012
*HRJUDIVNHLQIRUPDFLMH/RFLUDQMHVNRRUGLQDWDPLGHO5D]ãLULWHY]D
SDUDPHWULþQHYUHGQRVWL,62
Geographic information - Spatial referencing by coordinates - Part 2: Extension for
parametric values (ISO 19111-2:2009)
Geoinformation - Koordinatenreferenzsysteme - Teil 2: Erweiterung auf parametrisierte
Werte (ISO 19111-2:2009)
Information géographique - Système de références spatiales par coordonnées - Partie 2:
Supplément pour valeurs paramétriques (ISO 19111-2:2009)
Ta slovenski standard je istoveten z: EN ISO 19111-2:2012
ICS:
07.040 Astronomija. Geodezija. Astronomy. Geodesy.
Geografija Geography
35.240.70 Uporabniške rešitve IT v IT applications in science
znanosti
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 19111-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2012
ICS 35.240.70
English Version
Geographic information - Spatial referencing by coordinates -
Part 2: Extension for parametric values (ISO 19111-2:2009)
Information géographique - Système de références Geoinformation - Koordinatenreferenzsysteme - Teil 2:
spatiales par coordonnées - Partie 2: Supplément pour Erweiterung auf parametrisierte Werte (ISO 19111-2:2009)
valeurs paramétriques (ISO 19111-2:2009)
This European Standard was approved by CEN on 9 March 2012.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19111-2:2012: E
worldwide for CEN national Members.

Contents Page
Foreword .3

Foreword
The text of ISO 19111-2:2009 has been prepared by Technical Committee ISO/TC 211 “Geographic
information/Geomatics” of the International Organization for Standardization (ISO) and has been taken over
as EN ISO 19111-2:2012 by Technical Committee CEN/TC 287 “Geographic Information” the secretariat of
which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by October 2012, and conflicting national standards shall be withdrawn at
the latest by October 2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 19111-2:2009 has been approved by CEN as a EN ISO 19111-2:2012 without any
modification.
INTERNATIONAL ISO
STANDARD 19111-2
First edition
2009-08-15
Geographic information — Spatial
referencing by coordinates —
Part 2:
Extension for parametric values
Information géographique — Système de références spatiales par
coordonnées —
Partie 2: Supplément pour valeurs paramétriques

Reference number
ISO 19111-2:2009(E)
©
ISO 2009
ISO 19111-2:2009(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2009
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2009 – All rights reserved

ISO 19111-2:2009(E)
Contents Page
Foreword .iv
Introduction.v
1 Scope.1
2 Conformance .1
3 Normative references.1
4 Terms and definitions .1
5 Conventions.2
5.1 Abbreviated terms.2
5.2 UML notation.2
5.3 Attribute status .2
6 Spatio-parametric referencing .3
6.1 Overview.3
6.2 Parametric coordinate reference system.3
6.3 Parametric coordinate system .4
6.4 Parametric datum .6
6.5 Spatio-parametric coordinate reference system.7
6.6 Spatio-parametric coordinate reference system with time.8
6.7 Transformation and conversion of parametric coordinate reference systems .8
Annex A (normative) Conformance .9
Annex B (informative) Examples .11
Bibliography.16

ISO 19111-2:2009(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 19111-2 was prepared by Technical Committee ISO/TC 211, Geographic information/Geomatics.
ISO 19111 consists of the following parts, under the general title Geographic information — Spatial
referencing by coordinates:
⎯ Geographic information — Spatial referencing by coordinates
⎯ Part 2: Extension for parametric values
iv © ISO 2009 – All rights reserved

ISO 19111-2:2009(E)
Introduction
ISO 19111 describes the elements necessary to fully define various types of reference systems used for
spatial referencing by coordinates. In ISO 19111, a coordinate is one of n scalar values that define the position
of a point. ISO 19111 allows for coordinates which are angular, such as latitude and longitude, or linear, such
as easting and northing. It also describes the concept of a compound coordinate reference system, which
uses at least two independent coordinate reference systems to describe a three-dimensional spatial position.
Scientific communities, especially those concerned with the environmental sciences, frequently express
spatial position partially in terms of a parameter or function. Within these communities, this parameter or
function is treated as a coordinate. Its relationship with a spatial dimension will usually be non-linear.
Examples are widespread, but latitude, longitude and pressure is a commonly encountered example.
This part of ISO 19111 defines a parametric coordinate reference system using the concepts of ISO 19111.
The provisions of ISO 19111 are then used to include a parametric coordinate reference system as part of a
compound coordinate reference system. Optionally, time can also be included as an additional axis or as
axes.
INTERNATIONAL STANDARD ISO 19111-2:2009(E)

Geographic information — Spatial referencing by
coordinates —
Part 2:
Extension for parametric values
1 Scope
This part of ISO 19111 specifies the conceptual schema for the description of spatial referencing using
parametric values or functions. It applies the schema of ISO 19111 to combine a position referenced by
coordinates with a parametric value to form a spatio-parametric coordinate reference system (CRS). The
spatio-parametric CRS can optionally be extended to include time.
The intended users of this part of ISO 19111 are producers and users of environmental information.
Parameters which are attributes of spatial locations or features, but which are not involved in their spatial
referencing, are not addressed by this part of ISO 19111.
2 Conformance requirements
Any CRS for which conformance to this part of ISO 19111 is claimed shall be in accordance with Annex A.
3 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the cited edition applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 19111:2007, Geographic information — Spatial referencing by coordinates
4 Terms and definitions
For the purposes of this document the terms an
...