EN ISO 15703:1999

Leather - Tests for colour fastness - Colour fastness to mild washing (ISO 15703:1998)

Migrated from Progress Sheet (TC Comment) (2000-07-10): WIs 056 to 060 are the result of the splitting of WI 021 (TC Res 10/1996)

Leder - Farbechtheitsprüfungen - Bestimmung der waschechtheit bei Feinwäsche (ISO 15703:1998)

Diese Internationale Norm legt ein Verfahren zur Bestimmung der Beständigkeit von Leder bei Feinwäsche unter festgelegten Bedingungen fest. Das Verfahren ist für die Bewertung der Farbtonänderung von Leder, des Anblutens eines Begleitgewebes und der Zurichtung des Leders geeignet. Dieses Verfahren kann auch als Ledervorbereitung für die Bewertung der Änderung einer anderen physikalischen oder chemischen Eigenschaft während der Feinwäsche verwendet werden.

Cuir - Essais de solidité des teintures - Solidité des teintures au lavage doux (ISO 15703:1998)

La présente Norme internationale spécifie une méthode de détermination de la résistance du cuir au lavage doux sous certaines conditions précises. La présente méthode convient pour l'évaluation de la dégradation de la coloration du cuir, du dégorgement d'un tissu textile témoin et de toute modification du finissage du cuir. La présente méthode peut également être utilisée dans la préparation du cuir pour évaluer les changements de toute autre propriété physique ou chimique pendant le lavage doux.

Usnje - Preskušanje obstojnosti barve - Obstojnost barve pri blagem pranju (ISO 15703:1998)

General Information

• Status: Published
• Publication Date: 17-Aug-1999
• ICS: 59.140.30 - Leather and furs
• Technical Committee: CEN/TC 289 - Leather
• Drafting Committee: CEN/TC 289/WG 3 - Fastness test methods
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Start Date: 24-Nov-2004
• Completion Date: 24-Nov-2004
• Ref Project: SIST EN ISO 15703:2000 - Leather - Tests for colour fastness - Colour fastness to mild washing (ISO 15703:1998)

Standards Content (Sample)

SLOVENSKI STANDARD
01-februar-2000
Usnje - Preskušanje obstojnosti barve - Obstojnost barve pri blagem pranju (ISO
15703:1998)
Leather - Tests for colour fastness - Colour fastness to mild washing (ISO 15703:1998)
Leder - Farbechtheitsprüfungen - Bestimmung der waschechtheit bei Feinwäsche (ISO
15703:1998)
Cuir - Essais de solidité des teintures - Solidité des teintures au lavage doux (ISO
15703:1998)
Ta slovenski standard je istoveten z: EN ISO 15703:1999
ICS:
59.140.30 Usnje in krzno Leather and furs
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

INTERNATIONAL ISO
STANDARD 15703
IULTCS
IUF 423
First edition
1998-05-01
Leather — Tests for colour fastness —
Colour fastness to mild washing
Cuir — Essais de solidité des teintures — Solidité des teintures au lavage
doux
Reference number
A
ISO 15703:1998(E)
IULTCS/IUF 423
ISO 15703:1998(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national standards bodies (ISO member bodies). The work of
preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which
a technical committee has been established has the right to be represented
on that committee. International organizations, governmental and non-
governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard ISO 15703 was prepared by the Fastness Tests
Commission of the International Union of Leather Technologists and
Chemists Societies (IUF Commission, IULTCS). It is based on IUF 423
published in J. Soc. Leather Tech. Chem., 76, pp. 179-180 (1992), and
declared an official method of the IULTCS in October 1993.
Annexes A and B of this International Standard are for information only.
©  ISO 1998
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case postale 56 • CH-1211 Genève 20 • Switzerland
Internet [e-mail]
X.400 c=ch; a=400net; p=iso; o=isocs; s=central
Printed in Switzerland
ii
©
INTERNATIONAL STANDARD  ISO ISO 15703:1998(E)
Leather — Tests for colour fastness — Colour fastness
to mild washing
1 Scope
This International Standard specifies a method for determining the resistance of leather to mild
washing under specified conditions.
The method is suitable for assessing the change in colour of the leather, the staining of an
adjacent textile fabric and any change in the finish of the leather.
This method can also be used leather preparation for assessing the change in any other
physical or chemical property during mild washing.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute
provisions of this International Standard. At the time of publication, the editions indicated were
valid. All standards are subject to revision, and parties to agreements based on this
International Standard are encouraged to investigate the possibility of applying the most recent
editions of the standards indicated below. Members of IEC and ISO maintain registers of
currently valid International Standards.
ISO 105-A01:1994, Textiles — Tests for colour fastness — Part A01: General principles of
testing.
ISO 105-A02:1993, Textiles — Tests for colour fastness — Part A02: Grey scale for assessing
change in colour.
ISO 105-A03:1993, Textiles — Tests for colour fastness — Part A03: Grey scale for assessing
staining.
ISO 105-A04:1989,
Textiles — Tests for colour fastness — Part A04: Method for the
instrumental assessment of the degree of staining of adjacent fabrics.
©
ISO
ISO 15703:1998(E)
ISO 105-A05:1996, Textiles — Tests for colour fastness — Part A05: Instrumental assessment
of the change in colour for determination of grey scale rating.
ISO 105-F10:1989, Textiles — Tests for colour fastness — Part F10: Specification for adjacent
fabric: Multifibre.
ISO 2419:1972, Leather — Conditioning of test pieces for physical tests.
ISO 3696:1987, Water for analytical laboratory use — Specification and test methods.
IUP 2, Sampling
3 Principle
A composite specimen of the leather and an adjacent textile fabric is agitated together with
PTFE rods in a washing liquor, rinsed and then squeezed and dried. The change in colour of
the leather and the adjacent textile fabric are assessed with the standard grey scales and, if
applicable, any changes in the finish are noted.
The general colour fastness testing principles used are in accordance with those described in
ISO 105-A01, taking into account the differences between textile substrates and leather.
4 Apparatus and materials
Ordinary laboratory apparatus and
1)
4.1 Test apparatus , consisting of a rotating drum of capacity approximately 500 ml made
typ
...