EN ISO 17233:2002
(Main)Leather - Physical and mechanical tests - Determination of cold crack temperature of surface coatings (ISO 17233:2002)
Leather - Physical and mechanical tests - Determination of cold crack temperature of surface coatings (ISO 17233:2002)
ISO 17233:2002 specifies a method for determining the cold crack temperature of surface coatings applied to leather. It is applicable to all leathers which have a surface coating and which can be easily flexed.
Leder - Physikalische und mechanische Prüfungen - Bestimmung der Kältebruchtemperatur von Oberflächendeckschichten (ISO 17233:2002)
Diese Internationale Norm legt ein Verfahren zur Bestimmung der Kältebruchtemperatur von Oberflächendeckschichten fest, die auf Leder aufgetragen wurden. Das Verfahren gilt für alle Leder mit Oberflächendeckschichten, die leicht gefaltet werden können.
Cuir - Essais physiques et mécaniques - Détermination de la température des fissures à froid des revêtements de surface (ISO 17233:2002)
L'ISO 17233:2002 spécifie une méthode pour déterminer la température de fissuration à froid des revêtements de surface appliqués au cuir. Elle s'applique à tous les cuirs dotés d'un revêtement de surface et facilement flexibles.
Usnje - Fizikalni in mehanski preskusi - Ugotavljanje razpoke na površinskih premazih pri hladni temperaturi (ISO 17233:2002)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-februar-2003
Usnje - Fizikalni in mehanski preskusi - Ugotavljanje razpoke na površinskih
premazih pri hladni temperaturi (ISO 17233:2002)
Leather - Physical and mechanical tests - Determination of cold crack temperature of
surface coatings (ISO 17233:2002)
Leder - Physikalische und mechanische Prüfungen - Bestimmung der
Kältebruchtemperatur von Oberflächendeckschichten (ISO 17233:2002)
Cuir - Essais physiques et mécaniques - Détermination de la température des fissures a
froid des revetements de surface (ISO 17233:2002)
Ta slovenski standard je istoveten z: EN ISO 17233:2002
ICS:
59.140.30 Usnje in krzno Leather and furs
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 17233
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2002
ICS 59.140.30
English version
Leather - Physical and mechanical tests - Determination of cold
crack temperature of surface coatings (ISO 17233:2002)
Cuir - Essais physiques et mécaniques - Détermination de Leder - Physikalische und mechanische Prüfungen -
la température des fissures à froid des revêtements de Bestimmung der Kältebruchtemperatur von
surface (ISO 17233:2002) Oberflächendeckschichten (ISO 17233:2002)
This European Standard was approved by CEN on 9 September 2002.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2002 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17233:2002 E
worldwide for CEN national Members.
CORRECTED 2003-08-27
Foreword
This document (EN ISO 17233:2002) has been prepared by Technical Committee CEN/TC 289
"Leather", the secretariat of which is held by UNI, in collaboration with the International Union of
Leather Technologists and Chemists Societies (IULTCS).
It is based on Method IUP 29 of the International Union of Leather Technologists and Chemists
Societies.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by June 2003, and conflicting national
standards shall be withdrawn at the latest by June 2003.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium, Czech
Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg,
Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 17233:2002 has been approved by CEN as EN ISO 17233:2002 without any
modifications.
NOTE Normative references to International Standards are listed in Annex ZA (normative).
Annex ZA
(normative)
Normative references to international publications
with their relevant European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of
any of these publications apply to this European Standard only when incorporated in it by
amendment or revision. For undated references the latest edition of the publication referred to
applies (including amendments).
NOTE Where an International Publication has been modified by common modifications, indicated
by (mod.), the relevant EN/HD applies.
Publication Year Title EN Year
ISO 2418 2002 Leather - Chemical, physical EN ISO 2418 2002
and mechanical and fastness
tests - Sampling location
ISO 2419 2002 Leather - Physical and EN ISO 2419 2002
mechanical tests - Sample
preparation and conditioning
INTERNATIONAL ISO
STANDARD 17233
IULTCS/IUP
First edition
2002-12-15
Leather — Physical and mechanical
tests — Determination of cold crack
temperature of surface coatings
Cuir — Essais physiques et mécaniques — Détermination de
la température de fissuration à froid des revêtements de la surface
Reference number
ISO 17233:2002(E)
IULTCS/IUP 29
©
ISO 2002
ISO 17233:2002(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this
area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2002
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body
in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2002 – All rights reserved
ISO 17233:2002(E)
Contents
Page
Foreword. iv
1 Scope .1
2 Normative references .1
3 Principle.1
4 Apparatus .1
5 Sampling and samp
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.