EN ISO 13919-2:2001

Welding - Electron and laser beam welded joints - Guidance on quality levels for imperfections - Part 2: Aluminium and its weldable alloys (ISO 13919-2:2001)

This standard provides guidance on levels of imperfections in electron and laser beam welded joints in aluminium and its alloys. Three levels are given in such a way as to permit application for a wide range of welded fabrica-tions. The levels refer to production quality and not to the fitness-for-purpose of the product manufactur-ed.
This standard applies to electron and laser beam welding of:
- aluminium and its alloys;
- all types of welds welded with or without additional filler wire;
- materials equal to or above 1 mm thickness for electron and laser beam welding.
When significant deviations from the joint geometries and dimensions stated in this standard are present in the welded product, it is necessary to evaluate to what extent the provisions of this standard can apply.
NOTE   For circular welds, a lower quality level e.g., may be specified for the fade-out zone.
Metallurgical aspects, e.g. grain size, hardness are not covered by this standard.

Schweißen - Elektronenstrahl- und Laserstrahl-Schweißverbindungen - Richtlinie für Bewertungsgruppen für Unregelmäßigkeiten - Teil 2: Aluminium und seine schweißgeeigneten Legierungen (ISO 13919-2:2001)

Diese Norm ist eine Richtlinie zur Bewertung von Unregelmäßigkeiten bei elektronen- und laserstrahlgeschweißten Verbindungen von Aluminium und seinen Legierungen. Es sind drei Bewertungsgruppen in der Form angegeben, daß sie für den überwiegenden Teil aller Schweißungen anwendbar sind. Die Bewertungsgruppen beziehen sich auf die Fertigungsqualität und nicht auf die Gebrauchstauglichkeit der gefertigten Erzeugnisse. Diese Norm gilt für das Elektronen- und Laserstrahlschweißen von: - Aluminium und seinen Legierungen; - alle Arten von Nähten, geschweißt mit und ohne Zusatz; etc.

Soudage - Assemblages soudés par faisceau d'électrons et par faisceau laser - Guide des niveaux de qualité des défauts - Partie 2: Aluminium et ses alliages soudables (ISO 13919-2:2001)

La présente norme constitue un guide d'évaluation des niveaux des défauts dans les assemblages en aluminium et ses alliages soudés par faisceau d'électrons et par faisceau laser. Elle prévoit trois niveaux, de façon à être applicable à une large gamme de fabrications soudées. Ces niveaux se rapportent à la qualité en production et non à l'aptitude à l'emploi du produit fabriqué. La présente norme concerne le soudage par faisceau d'électrons et par faisceau laser dans les applications suivantes : - aluminium et ses alliages - tous types de soudures réalisées avec ou sans fil d'apport - matériaux d'épaisseur supérieure ou égale à 1 mm en soudage par faisceau d'électrons et par faisceau laser. Pour tout écart significatif dans la géométrie ou les dimensions de l'assemblage décrites dans la présente norme apparaissant sur le produit soudé, il est nécessaire d'évaluer dans quelle mesure les dispositions de la présente norme restent applicables.

Varjenje - Spoji, zvarjeni z elektronskim in laserskim žarkom - Smernice za stopnje sprejemljivosti napak - 2. del: Aluminij in njegove varive zlitine (ISO 13919-2:2001)

General Information

• Status: Withdrawn
• Publication Date: 14-Sep-2001
• Withdrawal Date: 16-Feb-2021
• ICS: 25.160.40 - Welded joints and welds
• Technical Committee: CEN/TC 121 - Welding
• Drafting Committee: CEN/TC 121/SC 4 - Quality management in the field of welding
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 17-Feb-2021
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN ISO 13919-2:2002 - Welding - Electron and laser beam welded joints - Guidance on quality levels for imperfections - Part 2: Aluminium and its weldable alloys (ISO 13919-2:2001)

Relations

• Replaced By: EN ISO 13919-2:2021 - Electron and laser-beam welded joints - Requirements and recommendations on quality levels for imperfections - Part 2: Aluminium, magnesium and their alloys and pure copper (ISO 13919-2:2021)
• Effective Date: 24-Feb-2021
• Amended By: EN ISO 13919-2:2001/A1:2003 - Welding - Electron and laser beam welded joints - Guidance on quality levels for imperfections - Part 2: Aluminium and its weldable alloys (ISO 13919-2:2003)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 13919-2:2002
01-maj-2002
Varjenje - Spoji, zvarjeni z elektronskim in laserskim žarkom - Smernice za stopnje
sprejemljivosti napak - 2. del: Aluminij in njegove varive zlitine (ISO 13919-2:2001)
Welding - Electron and laser beam welded joints - Guidance on quality levels for
imperfections - Part 2: Aluminium and its weldable alloys (ISO 13919-2:2001)
Schweißen - Elektronenstrahl- und Laserstrahl-Schweißverbindungen - Richtlinie für
Bewertungsgruppen für Unregelmäßigkeiten - Teil 2: Aluminium und seine
schweißgeeigneten Legierungen (ISO 13919-2:2001)
Soudage - Assemblages soudés par faisceau d'électrons et par faisceau laser - Guide
des niveaux de qualité des défauts - Partie 2: Aluminium et ses alliages soudables (ISO
13919-2:2001)
Ta slovenski standard je istoveten z: EN ISO 13919-2:2001
ICS:
25.160.40 Varjeni spoji in vari Welded joints
77.120.10 Aluminij in aluminijeve zlitine Aluminium and aluminium
alloys
SIST EN ISO 13919-2:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 13919-2:2002

---------------------- Page: 2 ----------------------

SIST EN ISO 13919-2:2002
EUROPEAN STANDARD
EN ISO 13919-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2001
ICS 25.160.00
English version
Welding - Electron and laser beam welded joints - Guidance on
quality levels for imperfections - Part 2: Aluminium and its
weldable alloys (ISO 13919-2:2001)
Soudage - Assemblages soudés par faisceau d'électrons et Schweißen - Elektronenstrahl- und Laserstrahl-
par faisceau laser - Guide des niveaux de qualité des Schweißverbindungen - Richtlinie für Bewertungsgruppen
défauts - Partie 2: Aluminium et ses alliages soudables für Unregelmäßigkeiten - Teil 2: Aluminium und seine
(ISO 13919-2:2001) schweißgeeigneten Legierungen (ISO 13919-2:2001)
This European Standard was approved by CEN on 13 April 2000.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2001 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13919-2:2001 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 13919-2:2002
EN ISO 13919-2:2001 (E)
Contents
Foreword.3
1 Scope .4
2 Normative references .4
3 Symbols .5
4 Evaluation of welds .5
Annex A (informative).13
Annex ZA (informative).14
2

---------------------- Page: 4 ----------------------

SIST EN ISO 13919-2:2002
EN ISO 13919-2:2001 (E)
Foreword
The text of EN ISO 13919-2:2001 has been prepared by Technical Committee CEN/TC 121 "Welding", the
secretariat of which is held by DS, in collaboration with Technical Committee ISO/TC 44 "Welding and allied
processes".
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by March 2002, and conflicting national standards shall b
...