SIST EN ISO 20957-4:2017

Stationary training equipment - Part 4: Strength training benches, additional specific safety requirements and test methods (ISO 20957-4:2016)

This part of ISO 20957 specifies safety requirements for stationary strength training benches and free-standing barbell racks used to perform exercises during use in addition to the general safety requirements of ISO 20957 1 and should be read in conjunction with it. This part of ISO 20957 is applicable to stationary training equipment type benches (type 4) (hereinafter referred to as benches) with the classes S, H and I.

Stationäre Trainingsgeräte - Teil 4: Kraft-Trainingsbänke, zusätzliche besondere sicherheitstechnische Anforderungen und Prüfverfahren (ISO 20957-4:2016)

Dieser Teil von ISO 20957 legt sicherheitstechnische Anforderungen für stationäre Kraft-Trainingsbänke und Bänke mit freistehenden Hantelablagen im Gebrauch fest, zusätzlich zu den allgemeinen sicherheits-technischen Anforderungen nach ISO 20957-1 und sollte in Verbindung damit gelesen werden.
Dieser Teil von ISO 20957 gilt für stationäre Trainingsgeräte vom Typ Bänke (Typ 4) der Klassen S, H und I (im Folgenden Bänke genannt).

Équipement d'entraînement fixe - Partie 4: Bancs pour haltères, exigences spécifiques de sécurité et méthodes d'essai supplémentaires (ISO 20957-4:2016)

ISO 20957-4:2016 spécifie les exigences de sécurité relatives aux bancs pour haltères et aux supports d'haltères autostables, qui viennent compléter les exigences générales de sécurité de l'ISO 20957‑1. Il est destiné à être lu conjointement avec l'ISO 20957‑1.
ISO 20957-4:2016 s'applique aux bancs de type appareil d'entraînement fixe (type 4) (« bancs » dans la suite du document) des classes S, H et I conformes à l'ISO 20957‑1.

Nepremična oprema za vadbo - 4. del: Klopi za vadbo moči, dodatne posebne varnostne zahteve in preskusne metode (ISO 20957-4:2016)

Ta del standarda EN 20957 določa varnostne zahteve za nepremične klopi za vadbo moči in prosto stoječa stojala za uteži, ki se uporabljajo med vadbo, poleg splošnih varnostnih zahtev standarda ISO 20957 1, pri čemer naj bi se ga bralo skupaj z njim. Ta del standarda ISO 20957 se uporablja za nepremične vadbene klopi (tip 4) (v nadaljnjem besedilu klopi) razredov S, H in I.

General Information

• Status: Published
• Public Enquiry End Date: 29-Oct-2015
• Publication Date: 19-Feb-2017
• ICS: 97.220.30 - Indoor sports equipment
• Technical Committee: SPO - Sports
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 03-Jan-2017
• Due Date: 10-Mar-2017
• Completion Date: 20-Feb-2017
• Directive: 2001/95/EC - Directive 2001/95/EC of the European Parliament and of the Council of 3 December 2001 on general product safety
• Mandate: M/506 - Standardisation mandate issued to the European standardisation organisations (ESOs) to develop European standards for stationary training equipment
• Ref Project: EN ISO 20957-4:2016 - Stationary training equipment - Part 4: Strength training benches, additional specific safety requirements and test methods (ISO 20957-4:2016)

Relations

• Replaces: SIST EN 957-4:2006+A1:2010 - Stationary training equipment - Part 4: Strength training benches, additional specific safety requirements and test methods
• Effective Date: 01-Mar-2017
• Replaces: SIST EN 957-4:2006+A1:2010 - Stationary training equipment - Part 4: Strength training benches, additional specific safety requirements and test methods
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 20957-4:2017
01-marec-2017
1DGRPHãþD
SIST EN 957-4:2006+A1:2010
1HSUHPLþQDRSUHPD]DYDGERGHO.ORSL]DYDGERPRþLGRGDWQHSRVHEQH
YDUQRVWQH]DKWHYHLQSUHVNXVQHPHWRGH,62
Stationary training equipment - Part 4: Strength training benches, additional specific
safety requirements and test methods (ISO 20957-4:2016)
Stationäre Trainingsgeräte - Teil 4: Kraft-Trainingsbänke, zusätzliche besondere
sicherheitstechnische Anforderungen und Prüfverfahren (ISO 20957-4:2016)
Équipement d'entraînement fixe - Partie 4: Bancs pour haltères, exigences spécifiques
de sécurité et méthodes d'essai supplémentaires (ISO 20957-4:2016)
Ta slovenski standard je istoveten z: EN ISO 20957-4:2016
ICS:
97.220.30 Oprema za dvoranske športe Indoor sports equipment
SIST EN ISO 20957-4:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 20957-4:2017

---------------------- Page: 2 ----------------------

SIST EN ISO 20957-4:2017


EN ISO 20957-4
EUROPEAN STANDARD

NORME EUROPÉENNE

December 2016
EUROPÄISCHE NORM
ICS 97.220.30 Supersedes EN 957-4:2006+A1:2010
English Version

Stationary training equipment - Part 4: Strength training
benches, additional specific safety requirements and test
methods (ISO 20957-4:2016)
Équipement d'entraînement fixe - Partie 4: Bancs pour Stationäre Trainingsgeräte - Teil 4: Kraft-
haltères, exigences spécifiques de sécurité et méthodes Trainingsbänke, zusätzliche besondere
d'essai supplémentaires (ISO 20957-4:2016) sicherheitstechnische Anforderungen und
Prüfverfahren (ISO 20957-4:2016)
This European Standard was approved by CEN on 7 November 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 20957-4:2016 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 20957-4:2017
EN ISO 20957-4:2016 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 20957-4:2017
EN ISO 20957-4:2016 (E)
European foreword
This document (EN ISO 20957-4:2016) has been prepared by Technical Committee ISO/TC 83 “Sports
and other recreational facilities and equipment” in collaboration with Technical Committee
CEN/TC 136 “Sports, playground and other recreational facilities and equipment” the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2017, and conflicting national standards shall be
withdrawn at the latest by June 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN 957-4:2006+A1:2010.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 20957-4:2016 has been approved by CEN as EN ISO 20957-4:2016 without any
modification.


3

---------------------- Page: 5 ----------------------

SIST EN ISO 20957-4:2017

---------------------- Page: 6 ----------------------

SIST EN ISO 20957-4:2017
INTERNATIONAL ISO
STANDARD 20957-4
Second edition
2016-11-15
Stationary training equipment —
Part 4:
Strength training benches, additional
specific safety requirements and test
methods
Équipement d’entraînement fixe —
Partie 4: Bancs pour haltères, exigences spécifiques de sécurité et
méthodes d’essai supplémentaires
Reference number
ISO 20957-4:2016(E)
©
ISO 2016

---------------------- Page: 7 ----------------------

SIST EN ISO 20957-4:2017
ISO 20957-4:2016(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. [phone]
Fax [phone]
[e-mail]
www.iso.org
ii © ISO 2016 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 20957-4:2017
ISO 20957-4:2016(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Classification . 1
5 Safety requirements . 1
5.1 General . 1
5.2 Benches with fixed barbell supports . 1
5.2.1 Stability of the barbell . 1
5.2.2 Lateral stability of benches with fixed barbell supports . 2
5.2.3 Longitudinal stability of benches with fixed barbell supports . 2
5.3 Free-standing barbell supports . 2
5.4 Dimensions of the barbell support . 2
5.5 Barbell support strength and stability . 2
5.6 Loading . 2
5.7 Barbell support . 3
6 Test methods . 3
6.1 General . 3
6.1.1 Dimensional check . 3
6.1.2 Visual examination . 3
6.1.3 Performance test . 3
6.2 Testing of rotational stability of the barbell . 3
6.3 Testing of rotational stability of benches with fixed barbell supports . 4
6.4 Testing of longitudinal stability
...