EN ISO/IEC 17030:2009
(Main)Conformity assessment - General requirements for third-party marks of conformity (ISO/IEC 17030:2003)
Conformity assessment - General requirements for third-party marks of conformity (ISO/IEC 17030:2003)
This International Standard provides general requirements for third-party marks of conformity, including their issue and use.
Konformitätsbewertung - Allgemeine Anforderungen an Konformitätszeichen einer dritten Seite (ISO/IEC 17030:2003)
Diese Internationale Norm legt allgemeine Anforderungen an Konformitätszeichen einer dritten Seite fest, einschließlich deren Ausstellung und Verwendung.
ANMERKUNG Diese Internationale Norm kann auch als Leitlinie für die Verwendung von Konformitätszeichen in anderen Konformitätsbewertungstätigkeiten als der durch eine dritte Seite verwendet werden.
Évaluation de la conformité - Exigences générales pour les marques de conformité par tierce partie (ISO/IEC 17030:2003)
Ugotavljanje skladnosti - Splošne zahteve za znake skladnosti tretje stranke (ISO/IEC 17030:2003)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO/IEC 17030:2009
01-julij-2009
Ugotavljanje skladnosti - Splošne zahteve za znake skladnosti tretje stranke
(ISO/IEC 17030:2003)
Conformity assessment - General requirements for third-party marks of conformity
(ISO/IEC 17030:2003)
Konformitätsbewertung - Allgemeine Anforderungen an Konformitätszeichen einer dritten
Seite (ISO/IEC 17030:2003)
Évaluation de la conformité - Exigences générales pour les marques de conformité par
tierce partie (ISO/IEC 17030:2003)
Ta slovenski standard je istoveten z: EN ISO/IEC 17030:2009
ICS:
03.120.20 Certificiranje proizvodov in Product and company
podjetij. Ugotavljanje certification. Conformity
skladnosti assessment
SIST EN ISO/IEC 17030:2009 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO/IEC 17030:2009
---------------------- Page: 2 ----------------------
SIST EN ISO/IEC 17030:2009
EUROPEAN STANDARD
EN ISO/IEC 17030
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2009
ICS 03.120.20
English version
Conformity assessment - General requirements for third-party
marks of conformity (ISO/IEC 17030:2003)
Évaluation de la conformité - Exigences générales pour les Konformitätsbewertung - Allgemeine Anforderungen an
marques de conformité par tierce partie (ISO/IEC Konformitätszeichen einer dritten Seite (ISO/IEC
17030:2003) 17030:2003)
This European Standard was approved by CEN on 7 May 2009.
CEN and CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving
this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning
such national standards may be obtained on application to the CEN Management Centre or to any CEN or CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN and/or CENELEC member into its own language and notified to the CEN Management Centre has the
same status as the official versions.
CEN and CENELEC members are the national standards bodies and national electrotechnical committees, respectively, of Austria,
Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and
United Kingdom.
CEN Management Centre: CENELEC Central Secretariat:
Avenue Marnix 17, B-1000 Brussels Avenue Marnix 17, B-1000 Brussels
© 2009 CEN/CENELEC All rights of exploitation in any form and by any means reserved Ref. No. EN ISO/IEC 17030:2009 E
worldwide for CEN national Members and for CENELEC
Members.
---------------------- Page: 3 ----------------------
SIST EN ISO/IEC 17030:2009
EN ISO/IEC 17030:2009 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO/IEC 17030:2009
EN ISO/IEC 17030:2009 (E)
Foreword
The text of ISO/IEC 17030:2003 has been prepared by Technical Committee ISO/CASCO “Committee on
conformity assessment” of the International Organization for Standardization (ISO) and the International
Electrotechnical Commission (IEC) and has been taken over as EN ISO/IEC 17030:2009 by Technical
Committee CEN/CENELEC/TC 1 “Criteria for conformity assessment bodies” the secretariat of which is held
by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by November 2009, and conflicting national standards shall be withdrawn
at the latest by November 2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO/IEC 17030:2003 has been approved by CEN as a EN ISO/IEC 17030:2009 without any
modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO/IEC 17030:2009
---------------------- Page: 6 --
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.