Greenhouse gases - Carbon footprint of products - Requirements and guidelines for quantification and communication (ISO/TS 14067:2013)

ISO/TS 14067:2013 specifies principles, requirements and guidelines for the quantification and communication of the carbon footprint of a product (CFP), based on International Standards on life cycle assessment (ISO 14040 and ISO 14044) for quantification and on environmental labels and declarations (ISO 14020, ISO 14024 and ISO 14025) for communication.
Requirements and guidelines for the quantification and communication of a partial carbon footprint of a product (partial CFP) are also provided.
ISO/TS 14067:2013 is applicable to CFP studies and different options for CFP communication based on the results of such studies.
Where the results of a CFP study are reported according to ISO/TS 14067:2013, procedures are provided to support both transparency and credibility and also to allow for informed choices.
ISO/TS 14067:2013 also provides for the development of CFP-product category rules (CFP-PCR), or the adoption of product category rules (PCR) that have been developed in accordance with ISO 14025 and that are consistent with ISO/TS 14067:2013.
ISO/TS 14067:2013 addresses only one impact category: climate change.
Offsetting is outside of the scope of ISO/TS 14067:2013.

Treibhausgase - Carbon Footprint von Produkten - Anforderungen an und Leitlinien für Quantifizierung und Kommunikation (ISO/TS 14067:2013)

Diese Technische Spezifikation legt Anforderungen an sowie Grundsätze und Leitlinien für die Quantifizierung und die Kommunikation des Carbon Footprint eines Produkts (CFP) auf der Grundlage Internationaler Normen zur Ökobilanz (ISO 14040 und ISO 14044) zur Quantifizierung sowie zu Umweltkennzeichnungen und −deklarationen (ISO 14020, ISO 14024, ISO 14025) zur Kommunikation fest.
Anforderungen an sowie Leitlinien für die Quantifizierung und die Kommunikation des partiellen Carbon Footprint eines Produkts (partieller CFP) sind ebenfalls enthalten.
Die vorliegende Technische Spezifikation gilt für CFP-Studien und für verschiedene Optionen der CFP-Kommunikation, die auf den Ergebnissen solcher Studien basieren.
Erfolgt die Berichterstattung der Ergebnisse einer CFP-Studie entsprechend dieser Technischen Spezifikation, sind Verfahren aufgeführt, die sowohl Transparenz und Glaubwürdigkeit fördern als auch fundierte Entscheidungen ermöglichen.
Die vorliegende Technische Spezifikation ermöglicht darüber hinaus die Entwicklung von CFP-bezogenen Produktkategorieregeln (CFP-PKR) bzw. die Übernahme von Produktkategorieregeln (PKR), die in Übereinstimmung mit ISO 14025 entwickelt wurden und dieser Technischen Spezifikation entsprechen.
Diese Technische Spezifikation behandelt nur eine einzige Wirkungskategorie, nämlich den Klimawandel.
Die CO2-Verrechnung (en: offsetting) liegt nicht im Anwendungsbereich dieser Technischen Spezifikation.

Gaz à effet de serre - Empreinte carbone des produits - Exigences et lignes directrices pour la quantification et la communication (ISO/TS 14067:2013)

L'ISO/TS 14067:2013 spécifie les principes, les exigences et les lignes directrices relatifs à la quantification et à la communication de l'empreinte carbone d'un produit (ECP), fondées sur les Normes internationales relatives à l'analyse du cycle de vie (ISO 14040 et ISO 14044) pour la quantification et relatives aux étiquettes et déclarations environnementales (ISO 14020, ISO 14024 et ISO 14025) pour la communication.
Des exigences et des lignes directrices concernant la quantification et la communication d'une empreinte carbone partielle d'un produit (ECP partielle) sont également fournies.
L'ISO/TS 14067:2013 s'applique aux études d'ECP et aux différentes options de communication des ECP fondées sur les résultats de ces études.
Lorsque les résultats d'une étude d'ECP sont rapportés conformément à la présente Spécification technique, des modes opératoires favorisant la transparence et la crédibilité et des modes opératoires permettant de faire des choix informés sont fournis.
L'ISO/TS 14067:2013 prévoit également l'élaboration de règles spécifiques des catégories de produits relatives à l'empreinte carbone des produits (PCR-ECP) ou l'adoption de règles spécifiques des catégories de produits (PCR) qui ont été élaborées conformément à l'ISO 14025 et qui sont compatibles avec la présente Spécification technique.
L'ISO/TS 14067:2013 ne concerne qu'une seule catégorie d'impact: le changement climatique.
La compensation n'entre pas dans le domaine d'application de l'ISO/TS 14067:2013.

Toplogredni plini - Ogljični odtis izdelkov - Zahteve in smernice za merjenje in sporočanje (ISO/TS 14067:2013)

CEN ISO/TS 14067 določa načela, zahteve in smernice za merjenje in sporočanje ogljičnega odtisa izdelka (CFP) na osnovi mednarodnih standardov o ocenjevanju življenjskega cikla (ISO 14040 in ISO 14044) za merjenje in o okoljskih označbah in deklaracijah (ISO 14020, ISO 14024 in ISO 14025) za sporočanje. Podane so tudi zahteve in smernice za merjenje in sporočanje delnega ogljičnega odtisa izdelka (delni CFP). Ta tehnična specifikacija velja za raziskave o ogljičnem odtisu izdelkov in različnih možnosti sporočanja ogljičnega odtisa izdelkov na osnovi rezultatov takšnih raziskav. Če so rezultati raziskave o ogljičnem odtisu izdelkov poročani v skladu s to tehnično specifikacijo, so na voljo postopki za podporo transparentnosti in kredibilnosti ter za sprejemanje utemeljenih odločitev. Ta tehnična specifikacija omogoča tudi razvoj pravil za kategorije izdelkov CFP (CFP-PCR) ali sprejetje pravil za kategorije izdelkov (PCR), ki so bili razviti v skladu s standardom ISO 14025 in so skladni s to tehnično specifikacijo. Ta tehnična specifikacija obravnava samo eno kategorijo vpliva: podnebne spremembe. Izravnava je zunaj obsega te tehnične specifikacije.

General Information

Status
Withdrawn
Publication Date
24-Jun-2014
Withdrawal Date
25-Sep-2018
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
26-Sep-2018

Relations

Buy Standard

Technical specification
TS CEN ISO/TS 14067:2014
English language
61 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-oktober-2014
7RSORJUHGQLSOLQL2JOMLþQLRGWLVL]GHONRY=DKWHYHLQVPHUQLFH]DPHUMHQMHLQ
VSRURþDQMH ,6276
Greenhouse gases - Carbon footprint of products - Requirements and guidelines for
quantification and communication (ISO/TS 14067:2013)
Treibhausgase - Carbon Footprint von Produkten - Anforderungen an und Leitlinien für
Quantifizierung und Kommunikation (ISO/TS 14067:2013)
Gaz à effet de serre - Empreinte carbone des produits - Exigences et lignes directrices
pour la quantification et la communication (ISO/TS 14067:2013)
Ta slovenski standard je istoveten z: CEN ISO/TS 14067:2014
ICS:
13.020.40 Onesnaževanje, nadzor nad Pollution, pollution control
onesnaževanjem in and conservation
ohranjanje
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

TECHNICAL SPECIFICATION
CEN ISO/TS 14067
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
June 2014
ICS 13.020.40
English Version
Greenhouse gases - Carbon footprint of products -
Requirements and guidelines for quantification and
communication (ISO/TS 14067:2013)
Gaz à effet de serre - Empreinte carbone des produits - Treibhausgase - Carbon Footprint von Produkten -
Exigences et lignes directrices pour la quantification et la Anforderungen an und Leitlinien für Quantifizierung und
communication (ISO/TS 14067:2013) Kommunikation (ISO/TS 14067:2013)
This Technical Specification (CEN/TS) was approved by CEN on 8 June 2014 for provisional application.

The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.

CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN ISO/TS 14067:2014 E
worldwide for CEN national Members.

Contents Page
Foreword .3

Foreword
The text of ISO/TS 14067:2013 has been prepared by Technical Committee ISO/TC 207 “Environmental
management” of the International Organization for Standardization (ISO) and has been taken over as
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria, Croatia, Cyprus,
Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO/TS 14067:2013 has been approved by CEN as CEN ISO/TS 14067:2014 without any
modification.
TECHNICAL ISO/TS
SPECIFICATION 14067
First edition
2013-05-15
Greenhouse gases — Carbon footprint
of products — Requirements and
guidelines for quantification and
communication
Gaz à effet de serre — Empreinte carbone des produits — Exigences
et lignes directrices pour la quantification et la communication
Reference number
ISO/TS 14067:2013(E)
©
ISO 2013
ISO/TS 14067:2013(E)
© ISO 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved

ISO/TS 14067:2013(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms, definitions and abbreviated terms . 1
3.1 Terms and definitions . 1
3.2 Abbreviated terms .11
4 Application .11
5 Principles .11
5.1 General .11
5.2 Life cycle perspective .12
5.3 Relative approach and functional unit .12
5.4 Iterative approach .12
5.5 Scientific approach .12
5.6 Relevance .12
5.7 Completeness .12
5.8 Consistency .12
5.9 Coherence .13
5.10 Accuracy .13
5.11 Transparency .13
5.12 Avoidance of double-counting .13
5.13 Participation .13
5.14 Fairness .13
6 Methodology for CFP quantification .13
6.1 General .13
6.2 Use of CFP-PCR .14
6.3 Goal and scope of the CFP quantification .15
6.4 Life cycle inventory analysis for the CFP .20
6.5 Life cycle impact assessment .28
6.6 Life cycle interpretation .29
7 CFP study report .29
8 Preparation for publicly available CFP communication .31
8.1 General .31
8.2 CFP disclosure report .31
9 CFP communication .32
9.1 Options for CFP communication .32
9.2 CFP communication intended to be publicly available .35
9.3 CFP communication not intended to be publicly available .36
9.4 CFP communication programme . .36
9.5 Creation of CFP-PCR .39
9.6 Additional aspects for CFP communication .39
Annex A (normative) The 100-year GWP .41
Annex B (normative) Limitations of the carbon footprint of a product.44
Annex C (informative) Possible procedures for the treatment of recycling in CFP studies .46
Annex D (normative) Comparison based on the CFP of different products .50
Bibliography .51
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.