EN 13126-9:2013

Building hardware - Requirements and test methods for windows and door height windows - Part 9: Hardware for horizontal and vertical pivot windows

This European Standard specifies the requirements and test methods for durability and strength of hardware for vertical and horizontal pivot windows and door height windows (including pivot hinges and central locking systems).
If the hardware manufacturer would like to classify an integrated restrictor function, the pivot hinges may be tested in accordance with EN 13126-5.
This European Standard does not apply to manoeuvring devices which are covered in EN 13126-2, EN 13126-3, EN 13126-7, EN 13126-14 and prEN 13126-18.

Baubeschläge - Anforderungen und Prüfverfahren für Fenster und Fenstertüren - Teil 9: Beschläge für Schwing- und Wendefenster

Diese Europäische Norm legt die Anforderungen an und die Prüfverfahren für die Dauerfunktionstüchtigkeit und Festigkeit von Beschlägen für Schwing- und Wendefenster fest (einschließlich Drehlager und Zentralver-riegelungssysteme).
Falls der Beschlaghersteller eine integrierte Begrenzungsfunktion klassifizieren möchte, müssen die Drehlager nach EN 13126-5 geprüft werden.
Diese Europäische Norm gilt nicht für Betätigungsvorrichtungen, die in EN 13126 2, EN 13126 3, EN 13126 7, EN 13126 14 und prEN 13126 18 behandelt werden.

Quincaillerie pour le bâtiment - Exigences et methodes d'essai des ferrures de fenêtres et portes-fenêtres - Partie 9: Ferrures pour fenêtres basculantes et pivotantes

La présente Norme européenne spécifie les exigences et les méthodes d'essai relatives à l'endurance et à la résistance des fenêtres et portes-fenêtres basculantes et pivotantes (y compris les pivots et les fermetures centrales).
Si le fabricant de quincaillerie souhaite classer un limiteur intégré, il convient que les pivots soient soumis à essai conformément à l'EN 13126-5.
La présente Norme européenne ne s'applique pas aux organes de manœuvre qui sont traités dans
l'EN 13126-2, l'EN 13126-3, l'EN 13126-7, l'EN 13126-14 et le prEN 13126-18.

Stavbno okovje - Okovje za okna in zastekljena vrata - Zahteve in preskusne metode - 9. del: Okovje za vodoravno in navpično vrtljiva okna

Ta evropski standard določa zahteve in preskusne metode za vzdržljivost in moč okovja za vodoravna in navpična vrtljiva okna ter zastekljena okna (vključno z vrtljivimi tečaji in sistemi centralnega zaklepanja). Če želi proizvajalec okovja opredeliti funkcijo vgrajenega zaklepa, se lahko vrtljivi tečaji preskušajo v skladu s standardom EN 13126-5. Ta evropski standard ne velja za naprave za manevriranje, ki jih obravnavajo standardi EN 13126-2, EN 13126-3, EN 13126-7, EN 13126-14 in prEN 13126-18.

General Information

• Status: Published
• Publication Date: 05-Feb-2013
• Withdrawal Date: 30-Aug-2013
• ICS: 91.190 - Building accessories
• Technical Committee: CEN/TC 33 - Doors, windows, shutters and building hardware
• Drafting Committee: CEN/TC 33/WG 4 - Building hardware
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 05-Oct-2018
• Ref Project: SIST EN 13126-9:2013 - Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 9: Hardware for horizontal and vertical pivot windows

Relations

• Replaces: CEN/TS 13126-9:2004 - Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 9: Pivot hinges
• Effective Date: 23-Apr-2011
• Revised: prEN 13126-9 - Building hardware - Hardware for windows and door height windows - Requirements and test methods - Part 9: Hardware for horizontal and vertical pivot windows
• Effective Date: 18-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Baubeschläge - Beschläge für Fenster und Fenstertüren - Anforderungen und Prüfverfahren - Teil 9: Beschläge für Schwing- und WendefensterQuincaillerie pour le bâtiment - Ferrures de fenêtres et portes-fenêtres - Exigences et méthodes d'essai - Partie 9 : Ferrures pour fenêtres basculantes et pivotantesBuilding hardware - Hardware for windows and door height windows - Requirements and test methods - Part 9: Hardware for horizontal and vertical pivot windows91.190Stavbna opremaBuilding accessoriesICS:Ta slovenski standard je istoveten z:EN 13126-9:2013SIST EN 13126-9:2013en,fr,de01-julij-2013SIST EN 13126-9:2013SLOVENSKI
STANDARDSIST-TS CEN/TS 13126-9:20051DGRPHãþD



SIST EN 13126-9:2013



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13126-9
February 2013 ICS 91.190 Supersedes CEN/TS 13126-9:2004English Version
Building hardware - Requirements and test methods for windows and door height windows - Part 9: Hardware for horizontal and vertical pivot windows
Quincaillerie pour le bâtiment - Exigences et methodes d'essai des ferrures de fenêtres et portes-fenêtres - Partie 9: Ferrures pour fenêtres basculantes et pivotantes
Baubeschläge - Anforderungen und Prüfverfahren für Fenster und Fenstertüren - Teil 9: Beschläge für Schwing- und Wendefenster This European Standard was approved by CEN on 14 December 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13126-9:2013: ESIST EN 13126-9:2013



EN 13126-9:2013 (E) 2 Contents Page Foreword . 4 1 Scope . 6 2 Normative references . 6 3 Terms and definitions . 6 4 Classification . 7 4.1 General . 7 4.2 Category of use (1 – first digit) . 7 4.3 Durability (2 – second digit) . 7 4.4 Mass (3 – third digit) . 7 4.5 Fire resistance (4 – fourth digit) . 7 4.6 Safety in use (5 – fifth digit) . 7 4.7 Corrosion resistance (6 – sixth digit) . 7 4.8 Security (7 – seventh digit) . 7 4.9 Application (8 – eighth digit). 8 4.10 Test sizes (9 - ninth digit).
...