EN ISO 10513:2012

Prevailing torque type all-metal hexagon high nuts with metric fine pitch thread - Property classes 8, 10 and 12 (ISO 10513:2012)

ISO 10513:2012 specifies the characteristics of prevailing torque type all-metal hexagon high nuts with metric fine pitch thread with nominal thread diameters, D, from 8 mm up to and including 36 mm, in product grade A for diameter sizes up to and including 16 mm and product grade B for diameter sizes above 16 mm, and with property classes 8, 10 and 12.

Hohe Sechskantmuttern mit Klemmteil (Ganzmetallmuttern) mit metrischem Feingewinde - Festigkeitsklassen 8, 10 und 12 (ISO 10513:2012) (ISO 10513:2012)

Diese Internationale Norm legt die Eigenschaften von hohen Sechskantmuttern mit Klemmteil (Ganzmetall-muttern) mit Feingewinde mit Gewindenenndurchmessern D von 8 mm bis 36 mm, in Produktklasse A für Größen D bis 16 mm und Produktklasse B für Größen D über 16 mm und mit Festigkeitsklassen 8, 10 und 12 fest.
ANMERKUNG   Die Maße der Muttern entsprechen den in ISO 8674 angegebenen Maßen, mit Ausnahme der Maße mw und hmax.
Werden andere Festlegungen benötigt, können diese den bestehenden Internationalen Normen entnommen werden, z. B. ISO 261, ISO 724, ISO 898 2, ISO 965 2, ISO 2320 und ISO 4759 1.

Écrous hexagonaux hauts autofreinés tout métal à filetage métrique à pas fin - Classes de qualité 8, 10 et 12 (ISO 10513:2012)

L'ISO 10513:2012 spécifie les caractéristiques des écrous hexagonaux hauts autofreinés tout métal à filetage métrique à pas fin, de diamètre nominal de filetage D de 8 mm à 36 mm inclus, de grade A pour les diamètres D jusqu'à 16 mm et de grade B pour les diamètres D supérieurs à 16 mm, et de classes de qualité 8, 10 et 12.

Visoke šestrobe zaščitne matice z deformacijo z drobnim metrskim navojem - Razredi trdnosti 8, 10 in 12 (ISO 10513:2012)

Ta mednarodni standard določa značilnosti visokih šestrobih zaščitnih matic z deformacijo z drobnim metrskim navojem z nazivnimi premeri navoja od 8 mm do vključno 36 mm, v razredu izdelave A za velikosti premera do vključno 16 mm in v razredu izdelave B za velikosti premera nad 16 mm, ter z razredi trdnosti 8, 10 in 12.

General Information

• Status: Published
• Publication Date: 18-Dec-2012
• Withdrawal Date: 29-Jun-2013
• ICS: 21.060.20 - Nuts
• Technical Committee: CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
• Drafting Committee: CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 19-Dec-2012
• Completion Date: 19-Dec-2012
• Ref Project: SIST EN ISO 10513:2013 - Prevailing torque type all-metal hexagon high nuts with metric fine pitch thread - Property classes 8, 10 and 12 (ISO 10513:2012)

Relations

• Replaces: EN ISO 10513:1997 - Prevailing torque type all-metal hexagon nuts, style 2, with metric fine pitch thread - Property classes 8, 10 and 12 (ISO 10513:1997)
• Effective Date: 25-Jan-2012
• Revised: prEN ISO 10513 - Prevailing torque (all-metal) hexagon high nuts, with fine pitch thread - Product grades A and B (ISO/DIS 10513:2016)
• Effective Date: 18-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 10513:2013
01-maj-2013
1DGRPHãþD
SIST EN ISO 10513:2001
9LVRNHãHVWUREH]DãþLWQHPDWLFH]GHIRUPDFLMR]GUREQLPPHWUVNLPQDYRMHP
5D]UHGLWUGQRVWLLQ,62
Prevailing torque type all-metal hexagon high nuts with metric fine pitch thread - Property
classes 8, 10 and 12 (ISO 10513:2012)
Hohe Sechskantmuttern mit Klemmteil (Ganzmetallmuttern) mit metrischem Feingewinde
- Festigkeitsklassen 8, 10 und 12 (ISO 10513:2012)
Écrous hexagonaux hauts autofreinés tout métal à filetage métrique à pas fin - Classes
de qualité 8, 10 et 12 (ISO 10513:2012)
Ta slovenski standard je istoveten z: EN ISO 10513:2012
ICS:
21.040.10 Metrski navoji Metric screw threads
21.060.20 Matice Nuts
SIST EN ISO 10513:2013 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 10513:2013

---------------------- Page: 2 ----------------------

SIST EN ISO 10513:2013


EUROPEAN STANDARD
EN ISO 10513

NORME EUROPÉENNE

EUROPÄISCHE NORM
December 2012
ICS 21.060.20 Supersedes EN ISO 10513:1997
English Version
Prevailing torque type all-metal hexagon high nuts with metric
fine pitch thread - Property classes 8, 10 and 12 (ISO
10513:2012)
Écrous hexagonaux hauts autofreinés tout métal à filetage Sechskantmuttern mit Klemmteil (Ganzmetallmuttern), Typ
métrique à pas fin - Classes de qualité 8, 10 et 12 (ISO 2, mit metrischem Feingewinde - Festigkeitsklassen 8, 10
10513:2012) und 12 (ISO 10513:2012)
This European Standard was approved by CEN on 13 November 2012.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10513:2012: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 10513:2013
EN ISO 10513:2012 (E)
Contents Page
Foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 10513:2013
EN ISO 10513:2012 (E)
Foreword
This document (EN ISO 10513:2012) has been prepared by Technical Committee ISO/TC 2 "Fasteners" in
collaboration with Technical Committee CEN/TC 185 “Fasteners” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2013, and conflicting national standards shall be withdrawn at
the latest by June 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 10513:1997.
According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 10513:2012 has been approved by CEN as a EN ISO 10513:2012 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 10513:2013

---------------------- Page: 6 ----------------------

SIST EN ISO 10513:2013
INTERNAT
...