Glass in Building - Basic soda lime silicate glass products - Part 7: Wired or unwired channel shaped glass

This Part of this European Standard specifies dimensional and minimum quality requirements (in respect of visual and wire faults) for channel shaped glass, as defined in EN 572-1, for use in building.
This Part of this standard covers channel shaped glass supplied in stock sizes and final cut sizes.

Glas im Bauwesen - Basiserzeugnisse aus Kalk-Natronsilicatglas Teil 7: Profilbauglas mit oder ohne Drahteinlage

Dieser Teil der Europäischen Norm legt die Anforderungen an Maße und Mindestqualität (in Bezug auf optische und sichtbare Fehler) für Profilbauglas für das Bauwesen, wie es in EN 572-1 definiert ist, fest.
EN 572-8 informiert über Profilbauglas in anderen als in diesem Teil aufgeführten Abmessungen.

Verre dans la construction - Produits de base: verre de silicate sodo-calcique - Partie 7: Verre profilé armé ou non armé

La présente partie de cette Norme européenne détermine les spécifications dimensionnelles et les spécifications qualitatives minimales (concernant les défauts d'aspect et les défauts du fil métallique) du verre profilé, tel que défini dans l'EN 572-1, pour l'utilisation dans la construction.
La présente partie de cette norme s'applique au verre profilé fourni en dimensions standard et en tailles découpées finales.

Steklo v stavbah - Osnovni proizvodi iz natrij-kalcijevega silikatnega stekla - 7. del: Žično in brezžično utorjeno steklo

General Information

Status
Withdrawn
Publication Date
22-Jun-2004
Withdrawal Date
17-Jul-2012
Current Stage
9960 - Withdrawal effective - Withdrawal
Due Date
18-Jul-2012
Completion Date
18-Jul-2012

RELATIONS

Buy Standard

Standard
EN 572-7:2004
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 572-7:2004
01-september-2004
1DGRPHãþD
SIST EN 572-7:1999

6WHNORYVWDYEDK2VQRYQLSURL]YRGLL]QDWULMNDOFLMHYHJDVLOLNDWQHJDVWHNODGHO

äLþQRLQEUH]åLþQRXWRUMHQRVWHNOR

Glass in Building - Basic soda lime silicate glass products - Part 7: Wired or unwired

channel shaped glass

Glas im Bauwesen - Basiserzeugnisse aus Kalk-Natronsilicatglas Teil 7: Profilbauglas

mit oder ohne Drahteinlage

Verre dans la construction - Produits de base: verre de silicate sodo-calcique - Partie 7:

Verre profilé armé ou non armé
Ta slovenski standard je istoveten z: EN 572-7:2004
ICS:
81.040.20 Steklo v gradbeništvu Glass in building
SIST EN 572-7:2004 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 572-7:2004
---------------------- Page: 2 ----------------------
SIST EN 572-7:2004
EUROPEAN STANDARD
EN 572-7
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2004
ICS 81.040.20 Supersedes EN 572-7:1994
English version
Glass in Building - Basic soda lime silicate glass products - Part
7: Wired or unwired channel shaped glass

Verre dans la construction - Produits de base: verre de Glas im Bauwesen - Basiserzeugnisse aus Kalk-

silicate sodo-calcique - Partie 7: Verre profilé armé ou non Natronsilicatglas Teil 7: Profilbauglas mit oder ohne

armé Drahteinlage
This European Standard was approved by CEN on 1 April 2004.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European

Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national

standards may be obtained on application to the Central Secretariat or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official

versions.

CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,

Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,

Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels

© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 572-7:2004: E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 572-7:2004
EN 572-7:2004 (E)
Contents
page

Foreword......................................................................................................................................................................3

1 Scope..............................................................................................................................................................4

2 Normative references....................................................................................................................................4

3 Terms and definitions ...................................................................................................................................4

4 Dimensional requirements............................................................................................................................5

4.1 Method of measurement ...............................................................................................................................5

4.1.1 Width, B, and height of flange, d..................................................................................................................5

4.1.2 Length, H ........................................................................................................................................................5

4.1.3 Thickness, c ...................................................................................................................................................6

4.1.4 Flange deviation.............................................................................................................................................6

4.1.5 Squareness of cut..........................................................................................................................................6

4.1.6 Wire inlay........................................................................................................................................................6

4.2 Tolerances......................................................................................................................................................6

4.2.1 Width, B, height of flange, d, and thickness c ............................................................................................6

4.2.2 Length.............................................................................................................................................................6

4.2.3 Flange deviation.............................................................................................................................................7

4.2.4 Squareness of cut..........................................................................................................................................7

4.2.5 Wire inlay........................................................................................................................................................7

5 Quality requirements.....................................................................................................................................7

5.1 General............................................................................................................................................................7

5.2 Methods of observation and measurement ................................................................................................7

5.2.1 Visual faults....................................................................................................................................................7

5.2.2 Wire faults.......................................................................................................................................................7

5.3 Acceptance levels..........................................................................................................................................8

5.3.1 Visual faults....................................................................................................................................................8

5.3.2 Wire faults.......................................................................................................................................................8

6 Designation....................................................................................................................................................8

Bibliography ................................................................................................................................................................9

---------------------- Page: 4 ----------------------
SIST EN 572-7:2004
EN 572-7:2004 (E)
Foreword

This document (EN 572-7:2004) has been prepared by Technical Committee CEN /TC 129 "Glass in Building", the

secretariat of which is held by IBN.

This European Standard shall be given the status of a national standard, either by publication of an identical text or

by endorsement, at the latest by December 2004, and conflicting national standards shall be withdrawn at the latest

by December 2004.
This document supersedes EN 572-7:1994.

This document has been prepared under a mandate given to CEN by the European Commission and the European

Free Trade Association, and supports essential requirements of EU Directive(s).

This European Standard “Glass in building – Basic soda lime silicate glass products” consists of the following parts:

EN 572-1 Definitions and general physical and mechanical properties
EN 572-2 Float glass
EN 572-3 Polished w
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.