EN 15194:2017/prA1

Cycles - Electrically power assisted cycles - EPAC Bicycles

This European Standard applies to EPAC bicycles for private and commercial use with exception of EPAC intended for hire from unattended station.
This European Standard is intended to cover all common significant hazards, hazardous situations and events (see Clause 4) of electrically power assisted bicycles, when used as intended and under condition of misuse that are reasonably foreseeable by the manufacturer.
This European Standard is intended to cover electrically power assisted bicycles of a type which have a maximum continuous rated power of 0,25 kW, of which the output is progressively reduced and finally cut off as the EPAC reaches a speed of 25 km/h, or sooner, if the cyclist stops pedalling.
This European Standard specifies requirements and test methods for engine power management systems, electrical circuits including the charging system for the design and assembly of electrically power assisted bicycles and sub-assemblies for systems having a rated voltage up to and including 48 V d.c. or integrated battery charger with a nominal 230 V a.c. input.
This European Standard specifies safety and safety related performance requirements for the design, assembly, and testing of EPAC bicycles and subassemblies intended for use on public roads, and lays down guidelines for instructions on the use and care of such bicycles.
This European Standard applies to EPAC bicycles that have a maximum saddle height of 635 mm or more and that are intended for use on public roads.
This European Standard is not applicable to EPACs which are manufactured before the date of its publication as EN.

Fahrräder - Elektromotorisch unterstützte Räder - EPAC

Cycles - Cycles à assistance électrique - Bicyclettes EPAC

Kolesa - Kolesa z električnim pomožnim pogonom - Kolesa EPAC - Dopolnilo A1

General Information

• Status: Not Published
• ICS: 43.120 - Electric road vehicles
• ICS: 43.150 - Cycles
• Technical Committee: CEN/TC 333 - Cycles
• Drafting Committee: CEN/TC 333/WG 5 - Electric power assisted cycles
• Current Stage: 4599 - Dispatch of FV draft to CMC - Finalization for Vote
• Due Date: 17-Mar-2022
• Completion Date: 17-Mar-2022
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: SIST EN 15194:2017/oprA1:2022 - Cycles - Electrically power assisted cycles - EPAC Bicycles

RELATIONS

• Amends: EN 15194:2017 - Cycles - Electrically power assisted cycles - EPAC Bicycles
• Effective Date: 02-Jun-2021

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 15194:2017/oprA1:2022
01-januar-2022
Kolesa - Kolesa z električnim pomožnim pogonom - Kolesa EPAC - Dopolnilo A1
Cycles - Electrically power assisted cycles - EPAC Bicycles
Fahrräder - Elektromotorisch unterstützte Räder - EPAC
Cycles - Cycles à assistance électrique - Bicyclettes EPAC
Ta slovenski standard je istoveten z: EN 15194:2017/prA1
ICS:
43.120 Električna cestna vozila Electric road vehicles
43.150 Kolesa Cycles
SIST EN 15194:2017/oprA1:2022 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 15194:2017/oprA1:2022
---------------------- Page: 2 ----------------------
SIST EN 15194:2017/oprA1:2022
DRAFT
EUROPEAN STANDARD
EN 15194:2017
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
November 2021
ICS 43.120; 43.150
English Version
Cycles - Electrically power assisted cycles - EPAC Bicycles

Cycles - Cycles à assistance électrique - Bicyclettes Fahrräder - Elektromotorisch unterstützte Räder -

EPAC EPAC

This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 333.

This draft amendment A1, if approved, will modify the European Standard EN 15194:2017. If this draft becomes an amendment,

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of

this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other

language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC

Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are

aware a
...