EN ISO 13844:2015

Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes - Test method for leaktightness under negative pressure, angular deflection and deformation (ISO 13844:2015)

ISO 13844:2015 specifies a method for testing the leak tightness under negative pressure, angular deflection, and deformation of assembled joints between elastomeric-sealing-ring-type sockets made of plastic or metal and plastic pressure pipes.

Kunststoff-Rohrleitungssysteme - Steckmuffenverbindungen mit elastomeren Dichtringen für Kunststoffrohre - Prüfverfahren für die Dichtheit bei Unterdruck, Abwinkelung und Verformung (ISO 13844:2015)

Diese Norm legt ein Verfahren zur Prüfung der Dichtheit bei Unterdruck, Abwinkelung und Verformung von montierten Verbindungen zwischen Steckmuffen mit elastomeren Dichtringen aus thermoplastischem Kunststoff oder Metall und thermoplastischen Druckrohren fest.

Systèmes de canalisations en plastiques - Assemblages par emboîture à bague d'étanchéité en élastomère pour les tubes sous pression plastiques - Méthode d'essai pour l'étanchéité sous pression négative, déviation angulaire et déformation (ISO 13844:2015)

L'ISO 13844:2015 spécifie une méthode d'essai pour l'étanchéité sous pression négative, déviation angulaire et déformation d'assemblages entre emboîtures avec bague d'étanchéité en élastomère réalisées en plastique ou en métal et tubes sous pression plastiques.

Cevni sistemi iz polimernih materialov - Spoji z elastomernimi tesnilnimi obroči za tlačne polimerne cevi - Metoda za preskus tesnjenja spojev, obremenjenih s podtlakom ter izpostavljenih upogibu in deformaciji (ISO 13844:2015)

General Information

• Status: Withdrawn
• Publication Date: 03-Mar-2015
• Withdrawal Date: 22-Feb-2022
• ICS: 23.040.20 - Plastics pipes
• ICS: 23.040.60 - Flanges, couplings and joints
• ICS: 91.140.60 - Water supply systems
• Technical Committee: CEN/TC 155 - Plastics piping systems and ducting systems
• Drafting Committee: CEN/TC 155/WG 8 - Systems for water supply and pressure drainage and sewerage - PVC-U (solid wall)
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 23-Feb-2022
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Ref Project: SIST EN ISO 13844:2015 - Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes - Test method for leaktightness under negative pressure, angular deflection and deformation (ISO 13844:2015)

Relations

• Replaces: EN ISO 13844:2000 - Plastics piping systems - Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC-U pipes - Test method for leaktightness under negative pressure (ISO 13844:2000)
• Effective Date: 11-Mar-2015
• Replaced By: EN ISO 13844:2022 - Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with plastic pipes - Test method for leaktightness under negative pressure, angular deflection and deformation (ISO 13844:2022)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
01-junij-2015
1DGRPHãþD
SIST EN ISO 13844:2001
&HYQLVLVWHPLL]SROLPHUQLKPDWHULDORY6SRML]HODVWRPHUQLPLWHVQLOQLPLREURþL]D
WODþQHSROLPHUQHFHYL0HWRGD]DSUHVNXVWHVQMHQMDVSRMHYREUHPHQMHQLKV
SRGWODNRPWHUL]SRVWDYOMHQLKXSRJLEXLQGHIRUPDFLML,62
Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with plastic
pressure pipes - Test method for leaktightness under negative pressure, angular
deflection and deformation (ISO 13844:2015)
Kunststoff-Rohrleitungssysteme - Steckmuffenverbindungen mit elastomeren Dichtringen
für Kunststoffrohre - Prüfverfahren für die Dichtheit bei Unterdruck, Abwinkelung und
Verformung (ISO 13844:2015)
Systèmes de canalisations en plastiques - Assemblages par emboîture à bague
d'étanchéité en élastomère pour les tubes sous pression plastiques - Méthode d'essai
pour l'étanchéité sous pression négative, déviation angulaire et déformation (ISO
13844:2015)
Ta slovenski standard je istoveten z: EN ISO 13844:2015
ICS:
23.040.60 Prirobnice, oglavki in spojni Flanges, couplings and joints
elementi
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 13844
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2015
ICS 91.140.60; 23.040.20 Supersedes EN ISO 13844:2000
English Version
Plastics piping systems - Elastomeric-sealing-ring-type socket
joints for use with plastic pressure pipes - Test method for
leaktightness under negative pressure, angular deflection and
deformation (ISO 13844:2015)
Systèmes de canalisations en plastiques - Assemblages Kunststoff-Rohrleitungssysteme -
par emboîture à bague d'étanchéité en élastomère pour les Steckmuffenverbindungen mit elastomeren Dichtringen für
tubes sous pression plastiques - Méthode d'essai pour Kunststoffrohre - Prüfverfahren für die Dichtheit bei
l'étanchéité sous pression négative, déviation angulaire et Unterdruck, Abwinkelung und Verformung (ISO
déformation (ISO 13844:2015) 13844:2015)
This European Standard was approved by CEN on 24 January 2015.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13844:2015 E
worldwide for CEN national Members.

Contents Page
Foreword .3
Foreword
This document (EN ISO 13844:2015) has been prepared by Technical Committee ISO/TC 138 "Plastics pipes,
fittings and valves for the transport of fluids" in collaboration Technical Committee CEN/TC 155 “Plastics
piping systems and ducting systems” the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by September 2015, and conflicting national standards shall be
withdrawn at the latest by September 2015.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 13844:2000.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 13844:2015 has been approved by CEN as EN ISO 13844:2015 without any modification.

INTERNATIONAL ISO
STANDARD 13844
Second edition
2015-03-01
Plastics piping systems —
Elastomeric-sealing-ring-type socket
joints for use with plastic pressure
pipes — Test method for leaktightness
under negative pressure, angular
deflection and deformation
Systèmes de canalisations en plastiques — Assemblages par
emboîture à bague d’étanchéité en élastomère pour les tubes sous
pression plastiques — Méthode d’essai pour l’étanchéité sous pression
négative, déviation angulaire et déformation
Reference number
ISO 13844:2015(E)
©
ISO 2015
ISO 13844:2015(E)
© ISO 2015
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2015 – All rights reserved

ISO 13844:2015(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Principle . 1
3 Test parameters and requirements . 1
4 Apparatus . 1
5 Test pieces . 2
6 Procedure. 3
7 Test report . 3
Annex A (normative) Test parameters . 5
ISO 13844:2015(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not b
...