EN 10296-1:2003
(Main)Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes
Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes
This part of EN 10296 specifies the technical delivery conditions for electric welded, laser beam welded and submerged arc welded tubes of circular cross section made of non-alloy and alloy steels for mechanical and general engineering purposes.
Geschweißte kreisförmige Stahlrohre für den Maschinenbau und allgemeine technische Anwendungen - Technische Lieferbedingungen - Teil 1: Rohre aus unlegierten und legierten Stählen
Dieser Teil der EN 10296 enthält die technischen Lieferbedingungen für elektrisch geschweißte, laserstrahl-geschweißte und unterpulvergeschweißte Rohre mit kreisförmigem Querschnitt aus unlegierten und legierten Stählen, die für die Anwendung im Maschinenbau und für allgemeine technische Anwendungen bestimmt sind.
Tubes ronds soudés en acier pour utilisation en mécanique générale et en construction mécanique - Conditions techniques de livraison - Partie 1 : Tubes en acier non allié et allié
La présente partie de l'EN 10296 spécifie les conditions techniques de livraison des tubes à section circulaire en acier non allié et allié soudés électriquement, par laser et à l'arc immergé sous flux en poudre, pour utilisation en mécanique générale et en construction mécanique.
Okrogle varjene jeklene cevi za strojništvo in splošno uporabo v tehniki – Tehnični dobavni pogoji – 1. del: Cevi iz nelegiranih in legiranih jekel
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Geschweißte kreisförmige Stahlrohre für den Maschinenbau und allgemeine technische Anwendungen - Technische Lieferbedingungen - Teil 1: Rohre aus unlegierten und legierten StählenTubes ronds soudés en acier pour utilisation en mécanique générale et en construction mécanique - Conditions techniques de livraison - Partie 1 : Tubes en acier non allié et alliéWelded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes77.140.75Jeklene cevi in cevni profili za posebne nameneSteel pipes and tubes for specific useICS:Ta slovenski standard je istoveten z:EN 10296-1:2003SIST EN 10296-1:2003en01-november-2003SIST EN 10296-1:2003SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 10296-1June 2003ICS 77.140.75English versionWelded circular steel tubes for mechanical and generalengineering purposes - Technical delivery conditions - Part 1:Non-alloy and alloy steel tubesTubes ronds soudés en acier pour utilisation en mécaniquegénérale et en construction mécanique - Conditionstechniques de livraison - Partie 1: Tubes en acier non alliéet alliéGeschweißte kreisförmige Stahlrohre für denMaschinenbau und allgemeine technische Anwendungen -Technische Lieferbedingungen - Teil 1: Rohre ausunlegierten und legierten StählenThis European Standard was approved by CEN on 20 February 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 10296-1:2003 ESIST EN 10296-1:2003
Typical range of dimensions for tube manufacturing processes.27Annex B (normative)
Formulae for calculation of nominal sectional properties.28Bibliography.29SIST EN 10296-1:2003
products - Types of inspection documents.EN 10220, Seamless and welded steel tubes – Dimensions and masses per unit length.EN 10232, Metallic materials - Tube (in full section) - Bend test.EN 10233, Metallic materials - Tube - Flattening test.EN 10234, Metallic materials - Tube - Drift expanding test.EN 10246-1, Non-destructive testing of steel tubes - Part 1: Automatic electromagnetic testing of seamless andwelded (except submerged arc-welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness.EN 10246-3, Non-destructive testing of steel tubes - Part 3: Automatic eddy current testing of seamless and welded(except submerged arc-welded) steel tubes for the detection of imperfections.EN 10246-5, Non-destructive testing of steel tubes - Part 5: Automatic full peripheral magnetic transducer/fluxleakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detectionof longitudinal imperfections.EN 10246-7, Non-destructive testing of steel tubes - Part 7: Automatic full peripheral ultrasonic testing of seamlessand welded (except submerged arc-welded) steel tubes for the detection of longitudinal imperfections.
1)In preparation; until this document is published as a European Standard, a corresponding national standard should be agreed at the time ofenquiry and order.SIST EN 10296-1:2003
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.