EN 13523-17:2011

Coil coated metals - Test methods - Part 17: Adhesion of strippable films

This European Standard specifies two methods for determining the numerical evaluation of the adhesion of strippable films which have previously been applied to an organic coating on a metallic substrate.
Samples can be tested irrespective of whether the strippable film has been applied in the laboratory or on the production line.
NOTE   Method 1 is preferred for films with adhesive and method 2 for films without adhesive.

Bandbeschichtete Metalle - Prüfverfahren - Teil 17: Haftfestigkeit von abziehbaren Folien

Diese Europäische Norm legt zwei Verfahren zum zahlenmäßigen Bewerten der Haftfestigkeit von abziehbaren Folien fest, die auf eine organische Beschichtung auf einem metallischen Substrat aufgebracht wurden. Es können Proben geprüft werden, unabhängig davon, ob die Folie im Laboratorium oder in der Produk-tionsanlage aufgebracht wurde. ANMERKUNG Verfahren 1 wird bevorzugt für Folien mit Klebstoff und Verfahren 2 bevorzugt für Folien ohne Klebstoff angewandt.

Tôles prélaquées - Méthodes d'essai - Partie 17: Adhérence des films pelables

La présente Norme européenne spécifie deux méthodes de quantification de l’adhérence des films pelables préalablement appliqués sur un revêtement organique recouvrant un subjectile métallique. L’essai peut être indifféremment effectué sur des échantillons dont le film pelable a été appliqué en laboratoire ou sur la chaîne de production. NOTE La méthode 1 est préconisée pour les films comportant un adhésif et la méthode 2 pour ceux n’en comportant pas.

Kovine, prevlečene v svitkih - Preskusne metode - 17. del: Oprijemljivost zaščitnih folij

Ta del standarda EN 13523 opisuje dve metodi za določanje številskega vrednotenja oprijemljivosti zaščitnih folij, ki so bile pred tem nanesene na organski premaz na kovinski podlagi.

General Information

• Status: Withdrawn
• Publication Date: 06-Dec-2011
• Withdrawal Date: 17-Sep-2019
• ICS: 25.220.60 - Organic coatings
• Technical Committee: CEN/TC 139 - Paints and varnishes
• Drafting Committee: CEN/TC 139/WG 9 - Testing of coil coated metals
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 18-Sep-2019
• Ref Project: SIST EN 13523-17:2012 - Coil coated metals - Test methods - Part 17: Adhesion of strippable films

Relations

• Replaces: EN 13523-17:2004 - Coil coated metals - Test methods - Part 17: Adhesion of strippable films
• Effective Date: 08-Jun-2022
• Replaced By: EN 13523-17:2019 - Coil coated metals - Test methods - Part 17: Adhesion of strippable films
• Effective Date: 25-Sep-2019

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.IROLMBandbeschichtete Metalle - Prüfverfahren - Teil 17: Haftfestigkeit von abziehbaren FolienTôles prélaquées - Méthodes d'essai - Partie 17: Adhérence des films pelablesCoil coated metals - Test methods - Part 17: Adhesion of strippable films25.220.60Organske prevlekeOrganic coatingsICS:Ta slovenski standard je istoveten z:EN 13523-17:2011SIST EN 13523-17:2012en,fr,de01-februar-2012SIST EN 13523-17:2012SLOVENSKI
STANDARDSIST EN 13523-17:20051DGRPHãþD



SIST EN 13523-17:2012



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13523-17
December 2011 ICS 25.220.60 Supersedes EN 13523-17:2004English Version
Coil coated metals - Test methods - Part 17: Adhesion of strippable films
Tôles prélaquées - Méthodes d'essai - Partie 17: Adhérence des films pelables
Bandbeschichtete Metalle - Prüfverfahren - Teil 17: Haftfestigkeit von abziehbaren Folien This European Standard was approved by CEN on 15 October 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13523-17:2011: ESIST EN 13523-17:2012



EN 13523-17:2011 (E) 2 Contents Page Foreword . 31Scope . 52Normative references . 53Terms and definitions . 54Principle . 55Apparatus . 55.1For method 1 . 55.2For method 2 . 66Sampling . 67Test panels . 68Procedure . 68.1Panel preparation. 68.1.1Self-adhesive strippable film . 68.1.2Non-adhesive strippable film . 68.2Determination . 78.2.1Method 1 .
...