EN 3475-303:2002
(Main)Aerospace series - Cables, electrical, aircraft use - Test methods - Part 303: Insulation resistance
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 303: Insulation resistance
This standard specifies a method of measuring the insulation resistance of finished cables.
It shall be used together with EN 3475-100.
Luft- und Raumfahrt - Elektrische Leitungen für Luftahrtverwendung - Prüfverfahren - Teil 303: Isolationswiderstand
Diese Norm legt ein Verfahren zum Messen des Isolationswiderstandes von fertigen Leitungen fest.
Sie ist in Verbindung mit EN 3475-100 anzuwenden.
Série aérospatiale - Câbles électriques à usage aéronautique - Méthodes d'essai - Partie 303: Résistance d'isolement
Cette norme définit une méthode pour mesurer la résistance d'isolement du câble terminé.
Elle doit être utilisée conjointement avec EN 3475-100.
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 303: Insulation resistance
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-maj-2004
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 303:
Insulation resistance
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 303: Insulation
resistance
Luft- und Raumfahrt - Elektrische Leitungen für Luftfahrt, Verwendung - Prüfverfahren -
Teil 303: Isolationswiderstand
Série aérospatiale - Câbles électriques a usage aéronautique - Méthodes d'essai - Partie
303: Résistance d'isolement
Ta slovenski standard je istoveten z: EN 3475-303:2002
ICS:
49.060 /HWDOVNDLQYHVROMVND Aerospace electric
HOHNWULþQDRSUHPDLQVLVWHPL equipment and systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 3475-303
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2002
ICS 49.060
English version
Aerospace series - Cables, electrical, aircraft use - Test
methods - Part 303: Insulation resistance
Série aérospatiale - Câbles électriques à usage Luft- und Raumfahrt - Elektrische Leitungen für Luftfahrt,
aéronautique - Méthodes d'essai - Partie 303: Résistance Verwendung - Prüfverfahren - Teil 303:
d'isolement Isolationswiderstand
This European Standard was approved by CEN on 5 August 2001.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2002 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3475-303:2002 E
worldwide for CEN national Members.
Foreword
This document (EN 3475-303:2002) has been prepared by the European Association of Aerospace
Manufacturers (AECMA).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
AECMA, prior to its presentat
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.