EN 4408-004:2005

Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 4: Items obtained by winding

This standard specifies the rules for the representation of items in composite materials obtained by winding as well as the information to be indicated in technical drawings.
It is applicable to aerospace structures using items in composite materials obtained by winding.
It shall be used together with EN 4408-1.

Luft- und Raumfahrt - Technische Zeichnungen - Darstellung von Teilen aus Verbundwerkstoffen - Teil 4: Im Wickelverfahren hergestellte Teile

Die vorgeschlagenen Darstellungen liefern nur die Definition von Teilen, die aus Zylindern gebildet sind, d. h. Flächen, die von einer geraden (generierenden) Linie erzeugt werden, die sich bewegt, während sie parallel zu einer bestimmten Richtung, entlang einer (gerichteten) Kurve verläuft. Diese Darstellungen reichen nicht aus, insbesondere um Teile mit Kegelstümpfen, Kernen oder elliptischen Böden zu beschreiben.
Diese Norm ist gedacht:
   für Teile, die durch Wickeln von Helikoidfäden eines Basisgarns hergestellt werden;
   für Teile, die durch Wickeln von Lagen (oder Schichten) hergestellt werden.

Série aérospatiale - Dessins techniques - Représentation des articles en matériaux composites - Partie 4 : Articles obtenus par enroulement

Aeronavtika – Tehniške risbe – Prikaz delov, izdelanih iz kompozitov – 4. del: Deli, izdelani z zvijanjem

General Information

• Status: Published
• Publication Date: 10-May-2005
• Withdrawal Date: 29-Nov-2005
• ICS: 01.100.99 - Other standards related to technical drawings
• ICS: 49.020 - Aircraft and space vehicles in general
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 1 - General
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 11-May-2005
• Completion Date: 11-May-2005
• Ref Project: SIST EN 4408-004:2005 - Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 4: Items obtained by winding

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2005
Aeronavtika – Tehniške risbe – Prikaz delov, izdelanih iz kompozitov – 4. del: Deli,
izdelani z zvijanjem
Aerospace series - Technical drawings - Representation of parts made of composite
materials - Part 4: Items obtained by winding
Luft- und Raumfahrt - Technische Zeichnungen - Darstellung von Teilen aus
Verbundwerkstoffen - Teil 4: Im Wickelverfahren hergestellte Teile
Série aérospatiale - Dessins techniques - Représentation des articles en matériaux
composites - Partie 4 : Articles obtenus par enroulement
Ta slovenski standard je istoveten z: EN 4408-004:2005
ICS:
01.100.99 'UXJLVWDQGDUGLY]YH]LV Other standards related to
WHKQLþQLPULVDQMHP technical drawings
49.020 Letala in vesoljska vozila na Aircraft and space vehicles in
splošno general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 4408-004
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2005
ICS 01.100.99; 49.020
English version
Aerospace series - Technical drawings - Representation of parts
made of composite materials - Part 4: Items obtained by winding
Série aérospatiale - Dessins techniques - Représentation Luft- und Raumfahrt - Technische Zeichnungen -
des articles en matériaux composites - Partie 4 : Articles Darstellung von Teilen aus Verbundwerkstoffen - Teil 4: Im
obtenus par enroulement Wickelverfahren hergestellte Teile
This European Standard was approved by CEN on 15 July 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4408-004:2005: E
worldwide for CEN national Members.

Contents Page
Foreword .3
Introduction.4
1 Scope.5
2 Normative references.5
3 Terms and definitions.5
4 Presentation on drawings .6
4.1 General rules.6
4.2 Specific rules.6
4.2.1 Symbol.6
4.2.2 Winding of filaments.6
4.2.3 Winding of plies .8
Bibliography.9

Foreword
This document (EN 4408-004:2005) has been prepared by the European Association of Aerospace
Manufacturers - Standardization (AECMA-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
AECMA, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by November 2005, and conflicting national standards shall be withdrawn
at the latest by November 2005.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland
and the United Kingdom.
Introduction
The proposed representations only provide the definition of parts made up of cylinders, i.e. surfaces created
by a straight (generator) line which moves while remaining parallel to a given direction, along a (directing)
curve. These representati
...