EN ISO 11127-6:1997

Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 6: Determination of water-soluble contaminants by conductivity measurements (ISO 11127-6:1993)

The procedure includes weighing a test portion of 100 g of the sample, adding 100 ml of the conductivity water, shaking, allowing to stand, filtering if necessary, transferring sufficient of the liquid to fill the conductivity cell of the conductivity-measuring bridge, and measuring the conductivity of the solution. Annex A gives information on the international standards series for non-metallic blast-cleaning abrasives ISO 11126 and ISO 11127.

Vorbereitung von Stahloberflächen vor dem Auftragen von Beschichtungsstoffen - Prüfverfahren für nichtmetallische Strahlmittel - Teil 6: Bestimmung der wasserlöslichen Verunreinigungen durch Messung der Leitfähigkeit (ISO 11127-6:1993)

Dieser Teil  von ISO 11127 legt ein Verfahren zur Bestimmung von wasserlöslichen Verunreinigungen in nichtmetallischen  Strahlmitteln durch Messung der Leit- fähigkeit fest.

Préparation des subjectiles d'acier avant application de peintures et de produits assimilés - Méthodes d'essai pour abrasifs non métalliques destinés à la préparation par projection - Partie 6: Détermination des contaminants solubles dans l'eau par conductimétrie (ISO 11127-6:1993)

La présente norme est l'une des parties de l'ISO 11127, qui traite de l'échantillonnage et des essais des abrasifs non métalliques destinés à la préparation par projection. Les types d'abrasifs non métalliques et les prescriptions relatives à chacun figurent dans les différentes parties de l'ISO 11126. Les séries des normes ISO 11126 et ISO 11127 constituent une série cohérente de normes internationales sur les abrasifs non métalliques destinés à la préparation par projection. Des informations sur toutes les parties des deux séries sont données dans l'annexe A. La présente partie de l'ISO 11127 prescrit une méthode conductimétrique pour la détermination des contaminants solubles dans l'eau, dans les abrasifs non métalliques destinés à la préparation par projection.

Priprava jeklenih podlag pred nanašanjem barvnih in sorodnih premazov - Preskusne metode za nekovinske granulate za peskanje - 6. del: Ugotavljanje vodotopnih nečistoč z merjenjem prevodnosti (ISO 11127-6:1993)

General Information

• Status: Withdrawn
• Publication Date: 22-Jul-1997
• Withdrawal Date: 14-Dec-2011
• ICS: 87.020 - Paint coating processes
• Technical Committee: CEN/TC 139 - Paints and varnishes
• Drafting Committee: CEN/TC 139 - Paints and varnishes
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 15-Dec-2011
• Completion Date: 15-Dec-2011
• Ref Project: SIST EN ISO 11127-6:1997 - Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 6: Determination of water-soluble contaminants by conductivity measurements (ISO 11127-6:1993)

Relations

• Replaced By: EN ISO 11127-6:2011 - Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 6: Determination of water-soluble contaminants by conductivity measurement (ISO 11127-6:2011)
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 11127-6:1997
01-december-1997
3ULSUDYDMHNOHQLKSRGODJSUHGQDQDãDQMHPEDUYQLKLQVRURGQLKSUHPD]RY
3UHVNXVQHPHWRGH]DQHNRYLQVNHJUDQXODWH]DSHVNDQMHGHO8JRWDYOMDQMH
YRGRWRSQLKQHþLVWRþ]PHUMHQMHPSUHYRGQRVWL,62
Preparation of steel substrates before application of paints and related products - Test
methods for non-metallic blast-cleaning abrasives - Part 6: Determination of water-
soluble contaminants by conductivity measurements (ISO 11127-6:1993)
Vorbereitung von Stahloberflächen vor dem Auftragen von Beschichtungsstoffen -
Prüfverfahren für nichtmetallische Strahlmittel - Teil 6: Bestimmung der wasserlöslichen
Verunreinigungen durch Messung der Leitfähigkeit (ISO 11127-6:1993)
Préparation des subjectiles d'acier avant application de peintures et de produits
assimilés - Méthodes d'essai pour abrasifs non métalliques destinés a la préparation par
projection - Partie 6: Détermination des contaminants solubles dans l'eau par
conductimétrie (ISO 11127-6:1993)
Ta slovenski standard je istoveten z: EN ISO 11127-6:1997
ICS:
25.220.10 Priprava površine Surface preparation
SIST EN ISO 11127-6:1997 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 11127-6:1997

---------------------- Page: 2 ----------------------

SIST EN ISO 11127-6:1997

---------------------- Page: 3 ----------------------

SIST EN ISO 11127-6:1997

---------------------- Page: 4 ----------------------

SIST EN ISO 11127-6:1997

---------------------- Page: 5 ----------------------

SIST EN ISO 11127-6:1997

---------------------- Page: 6 ----------------------

SIST EN ISO 11127-6:1997
INTERNATIONAL
ISO
STANDARD
11127-6
First edition
1993-12-15
Preparation of steel Substrates before
application of paints and related
products - Test methods for non-metallic
blast-cleaning abrasives -
Part 6:
Determination of water-soluble contaminants
by conductivity measurement
Prdparation des subjectiles d’acier avant application de peintures et de
produits assimik - Methodes d’essai pour abrasifs non m&alliques
destinh a Ia prdparation par projection -
Partie 6: Determination des contaminants solubles dans I’eau par
conductime trie
Reference number
ISO 11127-6:1993(E)

---------------------- Page: 7 ----------------------

SIST EN ISO 11127-6:1997
ISO 11127=6:1993(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national Standards bodies (ISO member bodies). The work
of preparing International Standards is normally carried out through ISO
technical committees. Esch member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission
(1 EC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard ISO 11127-6 was prepared by Technical Committee
ISOnC 35, Paints and varnishes, Subcommittee SC 12, Preparation of
steel substra tes be fore applica tion o f paints and rela ted products.
ISO 11% 27 consists of the following Parts, under the general title Prep-
aration of steel Substrates before application of paints and related
products - Test methods for non-metallic blast-cleaning abrasives:
- Part 7: Sampling
- Part 2: Determination of particle size distribution
- Part 3: Determination of apparent density
- Part 4: Assessment of hardness by a glass slide test
- Part 5: Determination of moisture
- Part 6s Determination of water-soluble contaminants by conductivity
measurement
- Part 7: Determination of wa ter-soluble chlorides
- Part 8: Determination of abrasive mechanical properties
0 ISO 1993
All rights reserved. Unless otherwise specified, no patt of this publication may be reproduced
or utilized in any form or by any means, electronie or mechanical, including photocopying and
microfilm, without Permission in writing from the publisher.
International Organization for Standardization
Case Postale 56 l CH-% 21% Geneve 20 l Switzerland
Printed in Switzerland

---------------------- Page: 8 ----------------------

SIST EN ISO 11127-6:1997
0 ISO
ISO 11127=6:1993(E)
At the time of publication of this part of ISO 11127, part 8 was in course
of preparation.
Annex A of this part of ISO 11127 is for information only.

---------------------- Page: 9 ----------------------

SIST EN ISO 11127-6:1997
This page intentionally left blank

-------
...