iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 1539:2000

(Main)

Dryers and ovens, in which flammable substances are released - Safety requirements

Dryers and ovens, in which flammable substances are released - Safety requirements

This standard deals with all significant hazards relevant to dryers and overns, in which flammable substances are released, when they are used as intended and under conditions foreseen by the manufacturer (see clause 4). 1.1 This standard is applicable to dryers, ovens and other evaporating equipment used in the pre-treatment, printing, coating and/or impregnating processes of surfaces and/or materials.

Trockner und Öfen, in denen brennbare Stoffe freigesetzt werden - Sicherheitsanforderungen

Diese Norm behandelt alle signifikanten Gefa(hrdungen, die auf Trockner und O(fen zutreffen, wenn sie bestimmungsgema(ß und entsprechend den vorhersehbaren Bedingungen des Herstellers verwendet werden (siehe Abschnitt 4). 1.1 Diese Norm gilt fu(r Trockner, O(fen und andere Verdunstungseinrichtungen, die zur Vorbehandlung, zum Bedrucken, Beschichten und/oder Impra(gnieren von Oberfla(chen und/oder Materialen verwendet werden.

Séchoirs et fours dans lesquels se dégagent des substances inflammables - Prescriptions de sécurité

La présente norme traite tous les phénoménes dangereux significatifs engendrés par les séchoirs et fours dans lesquels se dégagent des substances inflammables, lorsqu'ils sont utilisés normalement et dans les conditions prévues par le constructeur (voir article 4). 1.1 La présente norme est applicable aux séchoirs, fours et autres équipements d'évaporation utilisés pour les opérations de prétraitement, d'impression, d'application et/ou imprégnation des surfaces et/ou de matériaux.

Sušilniki in peči, v katerih se sproščajo vnetljive snovi - Varnostne zahteve

General Information

Status
Withdrawn
Publication Date
18-Jan-2000
Withdrawal Date
17-Nov-2009
ICS
25.180.01 - Industrial furnaces in general
Technical Committee
CEN/TC 271 - Surface treatment equipment - Safety
Drafting Committee
CEN/TC 271/WG 4 - Dryers, ovens and evaporating equipment
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
18-Nov-2009
Completion Date
18-Nov-2009
Directive
94/9/EC - Directive 94/9/EC of the European Parliament and the Council of 23 March 1994 on the approximation of the laws of the Member States concerning equipment and protective systems intended for use in potentially explosive atmospheres
98/37/EC - Machinery
Mandate
M/BC/CEN/88/13 - Standardization request to CEN/CENELEC relating to machinery
Ref Project
SIST EN 1539:2002 - Dryers and ovens, in which flammable substances are released - Safety requirements

Relations

Replaced By
EN 1539:2009 - Dryers and ovens, in which flammable substances are released - Safety requirements
Effective Date
21-Nov-2009

Buy Standard

EN 1539:2002EN 1539:2002
PreviousNext
Standard
EN 1539:2002
English language
63 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 1539:2002
01-september-2002
6XãLOQLNLLQSHþLYNDWHULKVHVSURãþDMRYQHWOMLYHVQRYL9DUQRVWQH]DKWHYH
Dryers and ovens, in which flammable substances are released - Safety requirements
Trockner und Öfen, in denen brennbare Stoffe freigesetzt werden -
Sicherheitsanforderungen
Séchoirs et fours dans lesquels se dégagent des subs
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 1539:2015(Main)
Dryers and ovens, in which flammable substances are released - Safety requirements
SIST EN 1539:2016

This European Standard deals with all significant hazards, hazardous situations and hazardous events relevant to ovens and dryers in which flammable substances are released by evaporation from and curing of coating materials.
The specific significant risks related to the use of this machinery with foodstuff and pharmaceutical products are not dealt with in this European Standard.
This European Standard is only applicable to machines which are used as intended and under the conditions which are foreseeable as malfunction by the manufacturer (see Clause 4).
For ovens and dryers in which flammable substances are released by evaporation from and curing of coating materials, in which the concentration of these flammable substances shall not, under no circumstances, exceed 3 % of the LEL, EN 746-1 and EN 746-2 may be applied instead of this European Standard.
This European Standard is not applicable to:
—   ovens for hardening metals;
—   enamelling plants;
—   portable heating systems for drying (for instance infrared radiant heaters, hot-air blowers, blow-dryers);
—   solvent recovery plants;
—   distillation and/or refraction plants;
—   textile dry-cleaning systems.
This European Standard is not applicable to machinery manufactured before the date of its publication as EN.

  • Standard
    81 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 13577-2:2023(Main)
Industrial furnaces and associated processing equipment - Safety - Part 2: Combustion and fuel handling systems (ISO 13577-2:2023)
kSIST FprEN ISO 13577-2:2023

This document specifies the safety requirements for combustion and fuel handling systems that are part of industrial furnaces and associated processing equipment (TPE), including single and multiple burner systems in thermoprocessing equipment and machines.
NOTE            The general safety requirements common to TPE are provided in ISO 13577-1:2016. ISO 13577-1:2016, Annex B also includes a list of processes for which industrial furnaces and heating systems covered by the ISO 13577 series are used.
This document deals with significant hazards, hazardous situations and events relevant to combustion and fuel handling systems as listed in Annex A, when used as intended and under the conditions for use as described in the instruction handbook.
This document covers:
—     fuel pipework downstream of and including the manual isolating valve;
—     combustion air supply (including oxygen and oxygen enriched combustion air) and flue gas system;
—     burner(s), burner system and ignition device;
—     functional requirements for safety related control system.
This document applies to any oxidation of gaseous and liquid fuels with air or other gases containing free oxygen to release thermal energy in TPE. Annex B includes examples of gaseous and liquid fuels.
For thermal or catalytic post combustion and waste incineration, this document applies only to auxiliary burners designed to start-up and/or support the process.
The pressure hazard of the piping and components covered by this document is within the maximum pressure/size relationship of category I as specified in Annex C.
This document also gives the necessary requirements regarding information for use.
This document does not cover hazards from heating generated by electricity.
This document does not deal with the hazards created by the release of flammable substances from the products processed in the TPE.
This document is not applicable to combustion and fuel handling systems:
—     of gas welding and allied processes;
—     up-stream of the TPE manual isolating valve.
This document is not applicable to industrial furnaces and associated processing equipment (TPE), including single and multiple burner systems in thermoprocessing equipment and machines manufactured before the date of its publication.
This document is not applicable to blast furnaces, converters (in steel plants), boilers, fired heaters (including reformer furnaces) in the petrochemical and chemical industries.
This document is not applicable to electrical cabling and power cabling upstream of the TPE control panel/protective system.

  • Draft
    125 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 13577-4:2022(Main)
Industrial furnaces and associated processing equipment - Safety - Part 4: Protective systems (ISO 13577-4:2022)
SIST EN ISO 13577-4:2022

This document specifies the requirements for protective systems used in industrial furnaces and associated processing equipment (TPE).
The functional requirements to which the protective systems apply are specified in ISO 13577-1 ISO 13577-2 and ISO 13577-3.
This document is not applicable to blast furnaces, converters (in steel plants), boilers, fired heaters (including reformer furnaces) in the petrochemical and chemical industries.
This document is not applicable to electrical cabling and power cabling upstream of the TPE control panel/protective system.
This document is not applicable to the protective systems manufactured before the date of its publication.

  • Standard
    92 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    92 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 746-3:2021(Main)
Industrial thermoprocessing equipment - Part 3: Safety requirements for the generation and use of atmosphere gases
SIST EN 746-3:2022

This part of the EN 746 series specifies safety requirements for generation and use of protective and reactive atmosphere gases that are part of industrial thermo-processing equipment (TPE).
The general safety requirements common to TPE are provided in EN 746 1:1997+A1:2009 (see Introduction).
This part of the EN 746 series deals with significant hazards, hazardous situations and events relevant to the generation and use of protective and reactive atmosphere gases created by thermochemical reactions and their use in TPE that are part of TPE as listed in Clause 4 and Clause 5, when used as intended and under the conditions foreseen by the manufacturer.
This part of the EN 746 series covers:
-   pipework downstream of and including the manual isolating valve,
-   equipment for the generation of atmosphere gases,
-   additional equipment for the use of atmosphere gases in TPE,
-   safety devices, and
-   functional requirements for safety related control system
for the generation and use of protective and reactive atmosphere gases.
It applies to the supply of atmosphere gas, source gas, inert gas and process liquids to TPE and their removal from TPE, confined to equipment integrated in the TPE.
This part of the EN 746 series also details the anticipated significant hazards associated with atmosphere gas systems and their use in TPE and specifies the appropriate preventative measures for the reduction or elimination of these hazards.
The pressure hazard of the piping and components covered by this standard is within the maximum pressure/size relationship of group 1 as described in Annex C.
This part of the EN 746 series:
-   specifies the requirements to be met to ensure the safety of persons and property during installation, commissioning, start up, operation, shutdown and maintenance,
-   does not cover the relevant risks involved in the flue gas ducting system when it is not considered a part of TPE,
-   is not applicable to utility supply upstream of the TPE main disconnects,
-   does not apply to TPE for semi-conductor devices,
-   does not apply to TPE with atmosphere, such as air and flue gas from an over stoichiometric combustion,
-   does not cover the decommissioning of the TPE,
-   does not cover vacuum furnaces,
-   does not cover blast furnaces, converters (in steel plants), boilers and equipment not covered under EN ISO 12100:2010.
-   does not deal with the hazard of noise which is covered in EN 746 1:1997+A1:2009,
-   is not applicable to generation and use of atmosphere gas in TPE and associated plant which is manufactured before the date of its publication, and
-   gives the necessary requirements for the information for use.
A TPE designed according to this part of EN 746 series does not create any potentially explosive atmosphere in the area around the TPE and is not designed to be located in an area with a potentially explosive or hazardous atmosphere.
This part of the EN 746 series deals with significant hazards which are described in Annex A.
A table of typical protective and reactive gases is given in Annex B.

  • Standard
    72 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    68 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1539:2015(Main)
Dryers and ovens, in which flammable substances are released - Safety requirements
SIST EN 1539:2016

This European Standard deals with all significant hazards, hazardous situations and hazardous events relevant to ovens and dryers in which flammable substances are released by evaporation from and curing of coating materials.
The specific significant risks related to the use of this machinery with foodstuff and pharmaceutical products are not dealt with in this European Standard.
This European Standard is only applicable to machines which are used as intended and under the conditions which are foreseeable as malfunction by the manufacturer (see Clause 4).
For ovens and dryers in which flammable substances are released by evaporation from and curing of coating materials, in which the concentration of these flammable substances shall not, under no circumstances, exceed 3 % of the LEL, EN 746-1 and EN 746-2 may be applied instead of this European Standard.
This European Standard is not applicable to:
—   ovens for hardening metals;
—   enamelling plants;
—   portable heating systems for drying (for instance infrared radiant heaters, hot-air blowers, blow-dryers);
—   solvent recovery plants;
—   distillation and/or refraction plants;
—   textile dry-cleaning systems.
This European Standard is not applicable to machinery manufactured before the date of its publication as EN.

  • Standard
    81 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 746-1:1997+A1:2009(Main)
Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment
SIST EN 746-1:2000+A1:2009

1.1   This part of EN 746 specifies common safety requirements for industrial thermoprocessing equipment (for example industrial furnaces and industrial heating equipment), which meets the definition for machinery given in EN ISO 12100-1:2003.
It details the anticipated significant hazards associated with industrial thermoprocessing equipment and specifies the appropriate preventative measures for reduction or elimination of these hazards.
This standard gives general principles and common requirements for the reduction of risks for equipments covered by the scope.
The common requirements apply to all of the subsequent parts of this EN 746 dealing with specific equipment unless an exception is stated in the relevant Part. The general principles (subclauses are pointed out) will be used to establish the specific technical measures in the subsequent Part(s) dealing with safety requirements for particular equipment.
NOTE   For similar equipment not covered by the particular Parts of this standard, EN 746-1 can be used to assist in the reduction of risk for the Hazards identified in clause 4 (List of Hazards).
1.2   This part of EN 746 is applicable to industrial thermoprocessing equipments for use in fields such as:
-   Metallurgical and metal working plant;
-   Glass making plant;
-   Ceramic manufacturing plant;
-   Cement, lime and gypsum manufacturing plant;
-   Chemical plant;
-   Waste incineration equipment;
And heated by:
-   Gaseous fuels;
-   Liquid fuels;
-   Solid fuels;
-   Mixed fuels;
-   Electricity.
The thermoprocessing equipment covered by this Part of EN 746 is further specified in clause 3.
A more detailed list of thermoprocessing equipment within these categories is given in Annex A.
In the remainder of this standard the expression "equipment" will be used.
This Part of EN 746 is not applicable to blast furnaces, converters (in steel plants), boilers, welding machines or food processing equipment.
1.3   This Part of EN 746 specifies the requirements to be

  • Standard
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    54 pages
    German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1547:2001+A1:2009(Main)
Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment
SIST EN 1547:2001+A1:2009

This noise test code specifies all the information necessary to carry out efficiently and under standardized conditions the determination, declaration and verification of the noise emission characteristics of industrial thermoprocessing equipment as described especially in EN 746-1, EN 746-2 and EN 746-3. It also indicates the location of work stations where measurements need to be made.
Noise emission characteristics include emission sound pressure levels at work stations and the sound power level. The determination of these quantities is necessary for:
-   manufacturers to declare the noise emitted;
-   comparing the noise emitted by machines in the group concerned;
-   purposes of noise control at the source at the design stage.
The use of this standard ensures the reproducibility of the determination of the noise emission characteristics within specified limits determined by the grade of accuracy of the basic noise measurement method used. Noise measurement methods allowed by this standard are engineering methods (grade 2) and survey methods (grade 3).
This standard does not cover the computation of personnel daily noise exposure.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 746-8:2000(Main)
Industrial thermoprocessing equipment - Part 8: Particular safety requirements for quenching equipment
SIST EN 746-8:2001

This part of EN 746 gives the specific hazards and safety requirements that shall be provided by the manufacturer for Quenching Equipment, whether it is used as an independent unit or an integrated part of a plant. This part of EN 746 does not cover specific hazards and safety requirements for Salt Bath bath equipment used as a quenching means (see prEN 746-5:1999). This part of EN 746 does not cover the handling, storage, transport, disposal, transfer or regeneration of the quenching media and processed material outside the limits of the equipment.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 746-5:2000(Main)
Industrial thermoprocessing equipment - Part 5: Particular safety requirements for salt bath thermoprocessing equipment
SIST EN 746-5:2001

This part of EN 746 gives the specific hazards and safety requirements for the melting and use of molten salt that shall be provided by the manufacturer for Salt Bath Industrial Thermoprocessing Equipment, whether it is used as an independent unit or an integrated part of a plant. The limits of the equipment will include any transportation equipment which is located wholly or partially in the bath. This part of EN 746 does not cover the handling, storage, transport disposal, transfer or regeneration of the salts and processed material outside the limits of the equipment.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 746-4:2000(Main)
Industrial thermoprocessing equipment - Part 4: Particular safety requirements for hot dip galvanising thermoprocessing equipment
SIST EN 746-4:2000

This part of EN 746 gives the specific hazards and safety requirements that shall be provided by the manufacturer for Hot Dip Industrial Batch and the Bath of Continuous Galvanising Thermoprocessing Equipment, whether it is used as an independent unit or an integrated part of a plant. This part of EN 746 does not cover the handling, storage, transport, disposal, transfer or regeneration of the zinc and the processed material outside the limits of the equipment. This part of EN 746 does not deal with the risks arising from any component handling equipment for the dip process or for the associated protective measures

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day