Geotextiles and geotextile-related products - Characteristics required for use in drainage systems

This European Standard specifies the relevant characteristics of geotextiles and geotextile-related products used in drainage systems and the appropriate test methods to determine these characteristics.
The intended use of these geotextiles or geotextile-related products is to fulfil one or more of the following functions: filtration, separation and drainage. The separation function is always used in conjunction with filtration or drainage. Accordingly separation will never be specified alone.
This standard is not applicable to geosynthetic barriers, as defined in EN ISO 10318..
This standard provides for the assessment and verification of constancy of performance of the product to this European Standard and for factory production control procedures.
This standard defines requirements to be met by manufacturers and distributors with regard to the presentation of product properties.

Geotextilien und geotextilverwandte Produkte - Geforderte Eigenschaften für die Anwendung in Dränanlagen

Géotextiles et produits apparentés - Caractéristiques requises pour l'utilisation dans les systèmes de drainage

Geotekstilije in geotekstilijam sorodni izdelki - Značilnosti, ki se zahtevajo pri drenažnih sistemih

General Information

Status
Not Published
Current Stage
5060 - Closure of Vote - Formal Approval
Start Date
12-Nov-2014
Due Date
25-Oct-2015
Completion Date
12-Nov-2014

Relations

Buy Standard

Draft
EN 13252:2014/kFprA1:2014
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13252:2014/kFprA1:2014
01-september-2014
*HRWHNVWLOLMHLQJHRWHNVWLOLMDPVRURGQLL]GHONL=QDþLOQRVWLNLVH]DKWHYDMRSUL
GUHQDåQLKVLVWHPLK
Geotextiles and geotextile-related products - Characteristics required for use in drainage
systems
Ta slovenski standard je istoveten z: EN 13252:2014/FprA1
ICS:
59.080.70 Geotekstilije Geotextiles
91.140.80 Drenažni sistemi Drainage systems
SIST EN 13252:2014/kFprA1:2014 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 13252:2014/kFprA1:2014

---------------------- Page: 2 ----------------------

SIST EN 13252:2014/kFprA1:2014

EUROPEAN STANDARD
FINAL DRAFT
EN 13252:2014
NORME EUROPÉENNE

EUROPÄISCHE NORM
FprA1
June 2014
ICS 59.080.70
English Version
Geotextiles and geotextile-related products - Characteristics
required for use in drainage systems
Géotextiles et produits apparentés - Caractéristiques Geotextilien und geotextilverwandte Produkte - Geforderte
requises pour l'utilisation dans les systèmes de drainage Eigenschaften für die Anwendung in Dränanlagen
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 189.

This draft amendment A1, if approved, will modify the European Standard EN 13252:2014. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13252:2014/FprA1:2014 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 13252:2014/kFprA1:2014
EN 13252:2014/FprA1:2014 (E)
Contents
Page
Foreword .3
1 Modification to Clause 2 .4
2 Modification to Annex B .4


2

---------------------- Page: 4 ----------------------

SIST EN 13252:2014/kFprA1:2014
EN 13252:2014/FprA1:2014 (E)
Foreword
This document (EN 13252:2014/FprA1:2014) has been prepared by Technical Committee CEN/TC 189
“Geosynthetics”, the secretariat of which is held by NBN.
This document is currently submitted to the Unique Acceptance Procedure.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document.
NOTE Due to fact that the Framework Partnership Agreement between the Commission and CEN & CENELEC is not
signed yet, there are currently no New Approach Consultants in place for 2014. Therefore the provisions of CEN-
CENELEC Guide 15 cannot be met.
This shall not prevent the processing of draft standards nor the offering of harmonized standards to the Commission. In
particular, draft standards can be sent to vote without Consultant assessment.
This note will be removed from the Foreword of the finalized publication.

3

---------------------- Page: 5 ----------------------

SIST EN 13252:2014/kFprA1:2014
EN 13252:20
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.