iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 1160:1996

(Main)

Installations and equipment for liquefied natural gas - General characteristics of liquefied natural gas

Installations and equipment for liquefied natural gas - General characteristics of liquefied natural gas

This European Standard gives guidance on the characteristics of liquefied natural gas (LNG) and the cryogenic materials used in the LNG industry. It also gives guidance on health and safety matters. It is intended to act as a reference document for the implementation of other standards of CEN/TC 282 "Installations and equipment for liquefied natural gas". It is intended as a reference for use by persons who design or operate LNG facilities.

Anlagen und Ausrüstung für Flüssigerdgas - Allgemeine Eigenschaften von Flüssigerdgas

Diese Europäische Norm informiert über die Eigenschaften von Flüssigerdgas (LNG) und die für LNG verwendeten tieftemperaturfesten Werkstoffe. Außerdem gibt sie Hinweise zu Fragen von Gesundheit und Sicherheit. Sie soll für weitere Normen des Technischen Komittees 282 "Anlagen und Ausrüstung für Flüssiggas" als Bezugsnorm dienen. Sie ist als Unterlage für Personen gedacht, die LNG-Anlagen auslegen oder betreiben.

Installations et équipements relatifs au gaz naturel liquéfié - Caractéristiques générales du gaz naturel liquéfié

La présente norme européenne donne des indications sur les caractéristiques du gaz naturel liquéfié (GNL) et sur les matériaux cryogéniques utilisés dans l'industrie du GNL. Elle donne également des indications sur la santé et la sécurité. Elle est destinée à servir de document de référence pour la mise en oeuvre des autres normes du CEN/TC 282 "Installations et équipements relatifs au gaz naturel liquéfié". Elle est destinée à servir de document de référence pour les personnes qui conçoivent ou exploitent des installations de GNL.

Napeljave in oprema za utekočinjeni zemeljski plin - Splošne lastnosti utekočinjenega zemeljskega plina

General Information

Status
Withdrawn
Publication Date
18-Jun-1996
Withdrawal Date
16-Jun-2015
ICS
75.180.01 - Equipment for petroleum and natural gas industries in general
Technical Committee
CEN/TC 282 - Installation and equipment for LNG
Drafting Committee
CEN/TC 282 - Installation and equipment for LNG
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
17-Jun-2015
Ref Project
SIST EN 1160:1998 - Installations and equipment for liquefied natural gas - General characteristics of liquefied natural gas

Relations

Replaced By
EN ISO 16903:2015 - Petroleum and natural gas industries - Characteristics of LNG, influencing the design, and material selection (ISO 16903:2015)
Effective Date
24-Jun-2015

Buy Standard

EN 1160:1998EN 1160:1998
PreviousNext
Standard
EN 1160:1998
English language
23 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.QRVWLAnlagen und Ausrüstung für Flüssigerdgas - Allgemeine Eigenschaften von FlüssigerdgasInstallations et équipements relatifs au gaz naturel liquéfié - Caractéristiques générales du gaz naturel liquéfiéInstallations and equipment for liquefied natural gas - General characteristics of liquefied natural gas75.180.01Oprema za industrijo nafte in zemeljskega plina na splošnoEquipment for petroleum and natural gas industries in general75.060Zemeljski plinNatural gasICS:Ta slovenski standard
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 16904:2016(Main)
Petroleum and natural gas industries - Design and testing of LNG marine transfer arms for conventional onshore terminals (ISO 16904:2016)
SIST EN ISO 16904:2016

ISO 16904:2016 specifies the design, minimum safety requirements and inspection and testing procedures for liquefied natural gas (LNG) marine transfer arms intended for use on conventional onshore LNG terminals, handling LNG carriers engaged in international trade. It can provide guidance for offshore and coastal operations. It also covers the minimum requirements for safe LNG transfer between ship and shore.
Although the requirements for power/control systems are covered, this International Standard does not include all the details for the design and fabrication of standard parts and fittings associated with transfer arms.
ISO 16904:2016 is supplementary to local or national standards and regulations and is additional to the requirements of ISO 28460.
ISO 16904:2016 needs not be applied to existing facilities.

  • Standard
    76 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16903:2015(Main)
Petroleum and natural gas industries - Characteristics of LNG, influencing the design, and material selection (ISO 16903:2015)
SIST EN ISO 16903:2015

ISO 16903:2015 gives guidance on the characteristics of liquefied natural gas (LNG) and the cryogenic materials used in the LNG industry. It also gives guidance on health and safety matters. It is intended to act as a reference document for the implementation of other standards in the liquefied natural gas field. It is intended as a reference for use by persons who design or operate LNG facilities.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12065:1997(Main)
Installations and equipment for liquefied natural gas - Testing of foam concentrates designed for generation of medium and high expansion foam and of extinguishing powders used on liquefied natural gas fires
SIST EN 12065:1999

This European Standard specifies the tests to be carried out in order to assess the suitability of foam concentrates used to produce medium expansion foam (made from foam concentrates conforming to prEN 1568-1) or high expansion foam (made from foam concentrates conforming to prEN 1568-2) and fire extinguishing powder conforming to EN 615 when used alone or in combination on liquefied natural gas (LNG) fires. This standard does not specify the general requirements for foam concentrates given in prEN 1568-1 and prEN 1568-2 or fire extinguishing powder given in EN 615.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 23936-4:2024(Main)
Oil and gas industries including lower carbon energy - Nonmetallic materials in contact with media related to oil and gas production Part 4: Fiber-reinforced composite materials (ISO 23936-4:2024)
SIST EN ISO 23936-4:2024

This document provides general principles, requirements and recommendations for the assessment of stability of fibre-reinforced composite materials for service in equipment used in oil and gas production environments.
This document describes the procedures for comparative testing of composite materials consisting of polymers (thermoplastics and thermosets) and re-enforcing materials e.g. glass, carbon, aramid and metals as continuous fibres or woven fabric used in equipment for oil and gas production.
Testing and characterization of neat resins and fibre products are beyond the scope of this document.
The equipment considered includes, but is not limited to, non-metallic pipelines, piping, liners and downhole tool components.
Blistering by rapid gas decompression, coatings and compounded particulate- and short fibre-reinforced composites are excluded from the scope of this document.

  • Standard
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 17977:2023(Main)
Gas infrastructure - Quality of gas - Hydrogen used in rededicated gas systems
SIST-TS CEN/TS 17977:2024

This document defines the quality of gaseous hydrogen, i.e. its parameters and limiting values, to be transmitted, injected into and extracted from storages, distributed and utilized in fully and/or partially rededicated gas infrastructure and connected applications in a safe way.
This document gives evidence to the end-user which minimum exit hydrogen quality can be expected and ensured from natural gas infrastructure as minimum requirement and without further purification.
NOTE 1   The rededicated gas infrastructure can include new parts of this infrastructure constructed/added after the conversion of the natural gas grid.
NOTE 2   It is expected that over time the hydrogen delivered through such pipework will improve in quality, e.g. due to the increase in share of high purity hydrogen produced by electrolysis This will be taken into account in further development of this document.

  • Technical specification
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 23936-1:2022(Main)
Oil and gas industries including lower carbon energy - Non-metallic materials in contact with media related to oil and gas production - Part 1: Thermoplastics (ISO 23936-1:2022)
SIST EN ISO 23936-1:2022

This document gives general principles, specifies requirements and gives recommendations for the assessment of the stability of non-metallic materials for service in equipment used in oil and gas exploration and production environments. This information aids in material selection. It can be applied to help avoid costly degradation failures of the equipment itself, which could pose a risk to the health and safety of the public and personnel or the environment. This document also provides guidance for quality assurance. It supplements but does not replace, the material requirements given in the appropriate design codes, standards or regulations.
This document addresses the resistance of thermoplastics to the deterioration in properties that can be caused by physical or chemical interaction with produced and injected oil and gas-field media, and with chemical treatment. Interaction with sunlight and ionizing radiation are excluded from the scope of this document.
This document is not necessarily suitable for application to equipment used in refining or downstream processes and equipment.
The equipment considered includes, but is not limited to, non-metallic pipelines, piping, liners, seals, gaskets and washers.
Blistering by rapid gas decompression is not included in the scope of this document.
This document applies to the assessment of the stability of non-metallic materials in simulated hydrocarbon production conditions to aid the selection of materials for equipment designed and constructed using conventional design criteria. Designs utilizing other criteria are excluded from its scope.

  • Standard
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 17797:2022(Main)
Gas infrastructure - Consequences of hydrogen in the gas infrastructure and identification of related standardisation need in the scope of CEN/TC 234
SIST-TP CEN/TR 17797:2022

This document is written in preparation of future standardization and provides guidance on the
impact of the injection of H2 into the gas infrastructure from the input of gas into the on­shore
transmission network up to the inlet connection of gas appliances. 
Furthermore, it identifies the expected revision need of the existing CEN/TC 243 standards as
well as the need of further new standardisation deliverables. 
It examines the effects on each part of the gas infrastructure in the scope of the CEN/TC 234
Working Groups 1 to 12 inclusive, based on available studies, reports and research. Due to
several limitations at different hydrogen concentrations, the impacts are specified. 
For some specific impact, pre­standardization research is needed. 
By convention, for this technical report, the injection of pure hydrogen, i. e. without trace
components is considered. 
The information from this report is intended to define the CEN/TC 234 work program for the
coverage of H2NG in relation to the scope of the CEN/TC 234 and its WGs. 
NOTE Progress on hydrogen will develop over time. In principle this will be reflected in the
standardisation process in CEN/TC 234.

  • Technical report
    127 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 15156-3:2020(Main)
Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys (ISO 15156-3:2020)
SIST EN ISO 15156-3:2021

This document gives requirements and recommendations for the selection and qualification of CRAs (corrosion-resistant alloys) and other alloys for service in equipment used in oil and natural gas production and natural gas treatment plants in H2S-containing environments whose failure can pose a risk to the health and safety of the public and personnel or to the environment. It can be applied to help avoid costly corrosion damage to the equipment itself. It supplements, but does not replace, the materials requirements of the appropriate design codes, standards, or regulations.
This document addresses the resistance of these materials to damage that can be caused by sulfide stress cracking (SSC), stress corrosion cracking (SCC), and galvanically induced hydrogen stress cracking (GHSC).
This document is concerned only with cracking. Loss of material by general (mass loss) or localized corrosion is not addressed.
Table 1 provides a non-exhaustive list of equipment to which this document is applicable, including exclusions.
This document applies to the qualification and selection of materials for equipment designed and constructed using load controlled design methods. For design utilizing strain-based design methods, see ISO 15156‑1:2020, Clause 5.
This document is not necessarily suitable for application to equipment used in refining or downstream processes and equipment.

  • Standard
    80 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 15156-2:2020(Main)
Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons (ISO 15156-2:2020)
SIST EN ISO 15156-2:2021

This document gives requirements and recommendations for the selection and qualification of carbon and low-alloy steels for service in equipment used in oil and natural gas production and natural gas treatment plants in H2S-containing environments, whose failure can pose a risk to the health and safety of the public and personnel or to the environment. It can be applied to help to avoid costly corrosion damage to the equipment itself. It supplements, but does not replace, the materials requirements of the appropriate design codes, standards or regulations.
This document addresses the resistance of these steels to damage that can be caused by sulfide stress cracking (SSC) and the related phenomena of stress-oriented hydrogen-induced cracking (SOHIC) and soft-zone cracking (SZC).
This document also addresses the resistance of these steels to hydrogen-induced cracking (HIC) and its possible development into stepwise cracking (SWC).
This document is concerned only with cracking. Loss of material by general (mass loss) or localized corrosion is not addressed.
Table 1 provides a non-exhaustive list of equipment to which this document is applicable, including exclusions.
This document applies to the qualification and selection of materials for equipment designed and constructed using load controlled design methods. For design utilizing strain-based design methods, see ISO 15156-1:2020, Clause 5.
Annex A lists SSC-resistant carbon and low alloy steels, and A.2.4 includes requirements for the use of cast irons.
This document is not necessarily suitable for application to equipment used in refining or downstream processes and equipment.

  • Standard
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 15156-1:2020(Main)
Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 1: General principles for selection of cracking-resistant materials (ISO 15156-1:2020)
SIST EN ISO 15156-1:2021

This document describes general principles and gives requirements and recommendations for the selection and qualification of metallic materials for service in equipment used in oil and gas production and in natural-gas sweetening plants in H2S-containing environments, where the failure of such equipment can pose a risk to the health and safety of the public and personnel or to the environment. It can be applied to help to avoid costly corrosion damage to the equipment itself. It supplements, but does not replace, the materials requirements given in the appropriate design codes, standards, or regulations.
This document addresses all mechanisms of cracking that can be caused by H2S, including sulfide stress cracking, stress corrosion cracking, hydrogen-induced cracking and stepwise cracking, stress-oriented hydrogen-induced cracking, soft zone cracking, and galvanically induced hydrogen stress cracking.
Table 1 provides a non-exhaustive list of equipment to which this document is applicable, including exclusions.
This document applies to the qualification and selection of materials for equipment designed and constructed using load controlled design methods. For design utilizing strain-based design methods, see Clause 5.
This document is not necessarily applicable to equipment used in refining or downstream processes and equipment.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day