EN ISO 2812-2:1994

Paints and varnishes - Determination of resistance to liquids - Part 2: Water immersion method (ISO 2812-2:1993)

This international standard specifies general methods for determining the resistance of a single-coat film or a multi-coat system of paints or related products to the action of liquids.

Lacke und Anstrichstoffe - Bestimmung der Beständigkeit gegen Flüssigkeiten - Teil 2: Verfahren mit Eintauchen in Wasser (ISO 2812-2:1993)

Dieser Teil von ISO 2812 gehört zu einer Reihe von Normen, welche die Probenahme und die Prüfung von Lacken, Anstrichstoffen und ähnlichen Beschichtungsstoffen behandelt.

Peintures et vernis - Détermination de la résistance aux liquides - Partie 2: Méthode par immersion dans l'eau (ISO 2812-2:1993)

Barve in laki - Določanje odpornosti proti tekočinam - 2. del: Metoda s potapljanjem v vodo (ISO 2812-2:1993)

General Information

• Status: Withdrawn
• Publication Date: 10-Nov-1994
• Withdrawal Date: 23-Jan-2007
• ICS: 87.040 - Paints and varnishes
• Technical Committee: CEN/TC 139 - Paints and varnishes
• Drafting Committee: CEN/TC 139 - Paints and varnishes
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 24-Jan-2007
• Completion Date: 24-Jan-2007
• Ref Project: SIST EN ISO 2812-2:1997 - Paints and varnishes - Determination of resistance to liquids - Part 2: Water immersion method (ISO 2812-2:1993)

Relations

• Replaced By: EN ISO 2812-2:2007 - Paints and varnishes - Determination of resistance to liquids - Part 2: Water immersion method (ISO 2812-2:2007)
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 2812-2:1997
01-december-1997
%DUYHLQODNL'RORþDQMHRGSRUQRVWLSURWLWHNRþLQDPGHO0HWRGDV
SRWDSOMDQMHPYYRGR,62
Paints and varnishes - Determination of resistance to liquids - Part 2: Water immersion
method (ISO 2812-2:1993)
Lacke und Anstrichstoffe - Bestimmung der Beständigkeit gegen Flüssigkeiten - Teil 2:
Verfahren mit Eintauchen in Wasser (ISO 2812-2:1993)
Peintures et vernis - Détermination de la résistance aux liquides - Partie 2: Méthode par
immersion dans l'eau (ISO 2812-2:1993)
Ta slovenski standard je istoveten z: EN ISO 2812-2:1994
ICS:
87.040 Barve in laki Paints and varnishes
SIST EN ISO 2812-2:1997 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 2812-2:1997

---------------------- Page: 2 ----------------------

SIST EN ISO 2812-2:1997

---------------------- Page: 3 ----------------------

SIST EN ISO 2812-2:1997

---------------------- Page: 4 ----------------------

SIST EN ISO 2812-2:1997

---------------------- Page: 5 ----------------------

SIST EN ISO 2812-2:1997

---------------------- Page: 6 ----------------------

SIST EN ISO 2812-2:1997
INTERNATIONAL
ISO
STANDARD 2812-2
First edition
1993-03-01
Paints and varnishes - Determination of
resistance to liquids -
Part 2:
Water immersion method
- Dgtermination de Ia rbsistance aux liquides -
Pein tures et vemis
Partie 2: M&hode par immersion dans I’eau
Reference number
ISO 2812-2:1993(E)

---------------------- Page: 7 ----------------------

SIST EN ISO 2812-2:1997
ISO 2812=2:1993(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national Standards bodies (ISO member bodies). The work
sf preparing International Standards is normally carried out through ISO
technical committees. Esch member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters sf electrotechnical standardization.
Draft International Standards adopted by the technical committees arc
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member badies casting
a vote.
International Standard ISO 2812-2 was prepared by Technical Committee
lSO/rC 35, Paints and varnishes, Sub-(Zornmittee SC 9, General fest
methods for paints and varnishes.
ISO 2812 consists of the following Parts, under the general title Paints and
varnishes - Determination of resistanee to liquids:
- Part 1: General methods
- Part 2: Water immersion method
This part of ISO 2812 cancels and replaces ISO 1521:1973, of which it
constitutes an editorial and minor technical revision.
Annex A fsrms an integral part of this part of ISO 2812.
t-3 ISO 1993
All rights reserved. No part of this publication may be reproduced or utilized in any form or
by any means, electronie or mechanical, including photocopying and microfilm, without per-
mission in writing from the publisher.
International Organization for Standardization
Case Postale 56 l CH-l 21 1 Geneve 20 l Switzerland
Printed in Switzerland
ii

---------------------- Page: 8 ----------------------

SIST EN ISO 2812-2:1997
INTERNATIONAL STANDARD ISO 2812=2:1993(E)
Paints and varnishes - Determination of resistance to
liquids -
Part 2:
Water immersion method
ISO 1514: -l), Paints and varnishes - Standard pan-
1 Scope
els for testing.
This part of ISO 2812 is one of a series of Standards
ISO 2808:1991, Paints and varnishes - Determi-
dealing with the sampling and testing of paints, var-
nation of film thickness.
nishes and related products.
ISO 3696: 1987, Water for analytical laboratory use -
lt specifies a method for determining the resistance
Specifica tion and test methods.
of a Single-coat film or multi-coat System of paints or
related products to the action of water by immersion.
ISO 4628.2:1982, Paints and varnishes - Evaluation
of degradation of paint coatings - Designation of in-
The method gives an indication of the results Iikely to
tensity, quantity and size of common types of defect
be obtained when painted articles are stored under
- Part 2: Designation of degree of blistering.
conditions where prolonged condensation but not an
extremely corrosive atmosphere may be produced. lt
is not intended to reproduce any particular condition
3 Principle
of condensation.
A coated test Panel is immersed in water and the ef-
fects of immersion are evaluated by criteria agreed in
advance between the interested Parties, these criteria
usually being of a subjective nature.
2 Normative references
The following Standards contain provisions which,
4 Required supplementary information
through reference in this text, constitute provisions
of this part of ISO 2812. At the time of publication, the
For any particular application, the test method speci-
editions indicated were valid. All Standards are subject
fied in this part of ISO 2812 needs to be completed
to revision, and Parties to agreements based on this
by supplementaty information. The items of sup-
patt of ISO 2812 are encouraged to investigate the
plementaty information are given in annex A.
possibility of applying the most recent editions of the
Standards indicated below. Members of IEC and ISO
5 Apparatus
maintain registers of currently valid International
Standards.
All Parts of the apparatus in contact with water shall
be made from inert materials.
ISO 1512:1991, Paints and varnishes - Sampling of
products in liquid or Paste form.
5.1 Tank, of suitable size (a convenient size of tank
is 700 mm x 400 mm x 400 mm), fitted with a cover,
ISO 1513: 1992, Paints and varnishes - Examination
a heater and thermostatic control.
and preparation of sam
...