EN ISO 2812-2:2007

Paints and varnishes - Determination of resistance to liquids - Part 2: Water immersion method (ISO 2812-2:2007)

ISO 2812-2:2007 specifies a method for determining the resistance of an individual-layer or multi-layer system of coating materials to the effects of water by partial or full immersion.
This method enables the determination of the effects of water on the coating and, if necessary, the assessment of the damage to the substrate.

Beschichtungsstoffe - Bestimmung der Beständigkeit gegen Flüssigkeiten - Teil 2: Verfahren mit Eintauchen in Wasser (ISO 2812-2:2007)

Dieser Teil von ISO 2812 legt ein Verfahren zum Bestimmen der Beständigkeit einer einzelnen Schicht oder eines Mehrschichtsystems aus Beschichtungsstoffen gegen die Einwirkung von Wasser durch teilweises oder ganzes Eintauchen fest.
Dieses Verfahren ermöglicht es, die Wirkung von Wasser auf die Beschichtung und, falls notwendig, die Schädigung des Substrates zu beurteilen.

Peintures et vernis - Détermination de la résistance aux liquides - Partie 2: Méthode par immersion dans l'eau (ISO 2812-2:2007)

L'ISO 2812-2:2007 spécifie une méthode de détermination de la résistance d'un système de revêtement monocouche ou multicouche à l'action de l'eau, en immersion totale ou partielle.
Cette méthode permet d'évaluer l'action de l'eau sur le revêtement et, si nécessaire, d'évaluer la détérioration du subjectile.

Barve in laki - Določanje odpornosti proti tekočinam - 2. del: Metoda s potapljanjem v vodo (ISO 2812-2:2007)

General Information

• Status: Withdrawn
• Publication Date: 14-Jan-2007
• Withdrawal Date: 11-Dec-2018
• ICS: 87.040 - Paints and varnishes
• Technical Committee: CEN/TC 139 - Paints and varnishes
• Drafting Committee: CEN/TC 139 - Paints and varnishes
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 12-Dec-2018
• Ref Project: SIST EN ISO 2812-2:2007 - Paints and varnishes - Determination of resistance to liquids - Part 2: Water immersion method (ISO 2812-2:2007)

Relations

• Replaces: EN ISO 2812-2:1994 - Paints and varnishes - Determination of resistance to liquids - Part 2: Water immersion method (ISO 2812-2:1993)
• Effective Date: 22-Dec-2008
• Replaced By: EN ISO 2812-2:2018 - Paints and varnishes - Determination of resistance to liquids - Part 2: Water immersion method (ISO 2812-2:2018)
• Effective Date: 19-Dec-2018

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 2812-2:2007
01-julij-2007
1DGRPHãþD
SIST EN ISO 2812-2:1997
%DUYHLQODNL'RORþDQMHRGSRUQRVWLSURWLWHNRþLQDPGHO0HWRGDV
SRWDSOMDQMHPYYRGR,62
Paints and varnishes - Determination of resistance to liquids - Part 2: Water immersion
method (ISO 2812-2:2007)
Beschichtungsstoffe - Bestimmung der Beständigkeit gegen Flüssigkeiten - Teil 2:
Verfahren mit Eintauchen in Wasser (ISO 2812-2:2007)
Peintures et vernis - Détermination de la résistance aux liquides - Partie 2: Méthode par
immersion dans l'eau (ISO 2812-2:2007)
Ta slovenski standard je istoveten z: EN ISO 2812-2:2007
ICS:
87.040 Barve in laki Paints and varnishes
SIST EN ISO 2812-2:2007 en;fr;de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN ISO 2812-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2007
ICS 87.040 Supersedes EN ISO 2812-2:1994
English Version
Paints and varnishes - Determination of resistance to liquids -
Part 2: Water immersion method (ISO 2812-2:2007)
Peintures et vernis - Détermination de la résistance aux Beschichtungsstoffe - Bestimmung der Beständigkeit
liquides - Partie 2: Méthode par immersion dans l'eau (ISO gegen Flüssigkeiten - Teil 2: Verfahren mit Eintauchen in
2812-2:2007) Wasser (ISO 2812-2:2007)
This European Standard was approved by CEN on 23 December 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 2812-2:2007: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN ISO 2812-2:2007 (E)





Foreword


This document (EN ISO 2812-2:2007) has been prepared by Technical Committee ISO/TC 35
"Paints and varnishes" in collaboration with Technical Committee CEN/TC 139 "Paints and
varnishes", the secretariat of which is held by DIN.

This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by July 2007, and conflicting national standards
shall be withdrawn at the latest by July 2007.

This document supersedes EN ISO 2812-2:1994.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United
Kingdom.


Endorsement notice

The text of ISO 2812-2:2007 has been approved by CEN as EN ISO 2812-2:2007 without any
modifications.

2

---------------------- Page: 3 ----------------------

INTERNATIONAL ISO
STANDARD 2812-2
Second edition
2007-01-15

Paints and varnishes — Determination of
resistance to liquids —
Part 2:
Water immersion method
Peintures et vernis — Détermination de la résistance aux liquides —
Partie 2: Méthode par immersion dans l'eau




Reference number
ISO 2812-2:2007(E)
©
ISO 2007

---------------------- Page: 4 ----------------------

ISO 2812-2:2007(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software pr
...