iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 12817:2002/A1:2006

(Amendment)

LPG equipment and accessories - Inspection and requalification of LPG tanks up to and including 13 m³ overground

LPG equipment and accessories - Inspection and requalification of LPG tanks up to and including 13 m³ overground

The purpose of this amendment is to re-write clause 5.3.1 in order to reflect the intention of the working group and to comply with industry practice as well as technical developments.

Flüssiggas-Geräte und Ausrüstungsteile - Instandhaltung und wiederkehrende Prüfung von Behältern für Flüssiggas (LPG) mit einem Fassungsraum bis einschließlich 13 m³ - Oberirdische Aufstellung

Equipements pour GPL et leurs accessoires - Inspection et requalification de réservoirs GPL aériens de capacité inférieure ou égale à 13 m³

Oprema in pribor za UNP – Pregledi in periodični preskusi rezervoarjev za utekočinjeni naftni plin (UNP) nadzemne izvedbe z notranjo prostornino do vključno 13 m3

General Information

Status
Withdrawn
Publication Date
28-Feb-2006
Withdrawal Date
12-Jan-2010
ICS
23.020.30 - Pressure vessels, gas cylinders
23.020.35 - Gas cylinders
Technical Committee
CEN/TC 286 - Liquefied petroleum gas equipment and accessories
Drafting Committee
CEN/TC 286/WG 7 - Operational requirements - Transportable LPG cylinders and static LPG tanks
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
13-Jan-2010
Completion Date
13-Jan-2010
Ref Project
SIST EN 12817:2002/A1:2006 - LPG equipment and accessories - Inspection and requalification of LPG tanks up to and including 13 m3 overground

Relations

Replaced By
EN 12817:2010 - LPG Equipment and accessories - Inspection and requalification of LPG tanks up to and including 13 m³
Effective Date
16-Jan-2010
Amends
EN 12817:2002 - LPG equipment and accessories - Inspection and requalification of LPG tanks up to and including 13 m³ overground
Effective Date
08-Jun-2022
Corrected By
EN 12817:2002/A1:2006/AC:2006 - LPG equipment and accessories - Inspection and requalification of LPG tanks up to and including 13 m³ overground
Effective Date
08-Jun-2022

Buy Standard

EN 12817:2002/A1:2006EN 12817:2002/A1:2006
PreviousNext
Amendment
EN 12817:2002/A1:2006
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 12817:2002/A1:2006
01-maj-2006
2SUHPDLQSULERU]D813±3UHJOHGLLQSHULRGLþQLSUHVNXVLUH]HUYRDUMHY]D
XWHNRþLQMHQLQDIWQLSOLQ 813 QDG]HPQHL]YHGEH]QRWUDQMRSURVWRUQLQRGR
YNOMXþQRP
LPG equipment and accessories - Inspection and requalification of LPG tanks up to and
including 13 m3 overground
Flüssiggas-Geräte und Ausrüstungsteile - Instandhaltung und wiederkehrende Prüfung
von Behältern für Flüssiggas (LPG) mit einem Fassungsraum bis einschließlich 13 m3 -
Oberirdische Aufstellung
Equipements pour GPL et leurs accessoires - Inspection et requalification de réservoirs
GPL aériens de capacité inférieure ou égale a 13 m3
Ta slovenski standard je istoveten z: EN 12817:2002/A1:2006
ICS:
23.020.30 7ODþQHSRVRGHSOLQVNH Pressure vessels, gas
MHNOHQNH cylinders
SIST EN 12817:2002/A1:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 12817:2002/A1:2006

---------------------- Page: 2 ----------------------

SIST EN 12817:2002/A1:2006
EUROPEAN STANDARD
EN 12817:2002/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2006
ICS 23.020.30

English Version
LPG equipment and accessories - Inspection and requalification
of LPG tanks up to and including 13 m³ overground
Equipements pour GPL et leurs accessoires - Inspection et Flüssiggas-Geräte und Ausrüstungsteile - Instandhaltung
requalification de réservoirs GPL aériens de capacité und wiederkehrende Prüfung von Behältern für Flüssiggas
inférieure ou égale à 13 m³ (LPG) mit einem Fassungsraum bis einschließlich 13 m³ -
Oberirdische Aufstellung
This amendment A1 modifies the European Standard EN 12817:2002; it was approved by CEN on 20 January 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Central Secretariat or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12817:2002/A1:2006: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 12817:2002/A1:2006
EN 12817:2002/A1:2006 (E)
Contents Page
1 General modifications.4
2 Modification to title.4
3 Modification to Foreword.4
4 Modification to definition 2.7 .4
5 Modification to 5.3 .4
6 Modification to Annex C.5
7 Modification to E.2.7
8 Modification to E.5.7
9 Modification to E.6.7
10 Modification to E.7.8

2

---------------------- Page: 4 ----------------------

SIST EN 12817:2002/A1:2006
EN 12817:2002/A1:2006 (E)
Foreword
This European Standard (EN 12817:2002/A1:2006) has been prepared by Technical Committee CEN/TC 286
“Liquefied petroleum gas equipment and accessories”, the secretar
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 12493:2020(Main)
LPG equipment and accessories - Welded steel pressure vessels for LPG road tankers - Design and manufacture
SIST EN 12493:2021

This document specifies minimum requirements for materials, design, construction and workmanship procedures, and tests for welded LPG road tanker pressure vessels and their welded attachments manufactured from carbon, carbon/manganese and micro alloy steels.
There is no upper size limit as this is determined by the gross vehicle weight limitation.
This document does not cover pressure vessels for pressure vessel containers.
NOTE 1 In the context of this document, the term "road tanker" is understood to mean "fixed tanks" and "demountable tanks" as defined in ADR.
NOTE 2 The equipment for the pressure vessels and the inspection and testing after assembly is covered by EN 12252 and EN 14334, respectively.
NOTE 3 The design type of the road tanker is subject to approval by the competent authority, as required by ADR.
NOTE 4 This document is intended for LPG only; however, for other liquefied gases see EN 14025.

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12807:2019(Main)
LPG equipment and accessories - Transportable refillable brazed steel cylinders for liquefied petroleum gas (LPG) - Design and construction
SIST EN 12807:2019

This document specifies the minimum requirements for the design, construction and testing during manufacture of transportable refillable brazed steel Liquefied Petroleum Gas (LPG) cylinders, of water capacity from 0,5 l up to and including 15 l, exposed to ambient temperatures.
This document applies only to cylinders having a circular cross-section without any longitudinal joint.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13952:2017(Main)
LPG equipment and accessories - Filling operations for LPG cylinders
SIST EN 13952:2018

This European Standard specifies the requirements for the operation of a cylinder filling plant to ensure that filling of transportable refillable LPG cylinders is carried out in a controlled and safe manner.
This document is applicable to the filling of cylinders complying with RID/ADR [10][11] (including pi marked cylinders) and also to existing non RID/ADR cylinder populations.
This document is applicable to the following:
-   welded and brazed steel LPG cylinders with a specified minimum wall thickness (see EN 1442 [1] and EN 12807 [2] or an equivalent standard);
-   welded steel LPG cylinders without specified minimum wall thickness (see EN 14140 [4] or an equivalent standard);
-   welded aluminium LPG cylinders (see EN 13110 [3] or an equivalent standard);
-   composite LPG cylinders (see EN 14427 [5] or an equivalent standard); and
-   over-moulded cylinders (OMC).
This document does not cover the requirements for filling LPG cylinders that are designed and equipped for filling by the user.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    10 pages
    German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1442:2017(Main)
LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Design and construction
SIST EN 1442:2017

This European Standard specifies the minimum requirements for the design, construction and testing during manufacture of transportable refillable welded steel Liquefied Petroleum Gas (LPG) cylinders, of water capacity from 0,5 l up to and including 150 l.
This European Standard applies only to cylinders having a circular cross-section.
Cylinders designed and constructed to the requirements of this European Standard may be over-moulded; additional requirements for these cylinders set out in Annex B.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    53 pages
    German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14140:2014/AC:2015(Corrigendum)
LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Alternative design and construction
SIST EN 14140:2015/AC:2015

This European Standard specifies the minimum requirements for the design, construction and testing during manufacture of transportable refillable welded steel Liquefied Petroleum Gas (LPG) cylinders, of water capacity from 0,5 l up to and including 150 l, exposed to temperatures of -20 °C to +65 °C. It allows alternative design and construction methods to those required in EN 1442, including coated cylinders, over-moulded cylinders and cylinders for hot air balloons.
This European Standard applies only to pressure receptacles with a circular cross-section.
This European Standard does not include the equipping of the cylinders with valves and other service equipment.

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 16765:2015(Main)
LPG equipment and accessories - Environmental considerations for CEN/TC 286 standards
SIST-TS CEN/TS 16765:2015

Protection of the environment needs to be considered during the total life-cycle of a particular product, e.g. impact on the environment including expenditure of energy during all phases of its life-cycle, from mining of raw materials, production, testing, packaging, distribution, maintenance and use, end-of-life disposal and recycling of materials, etc.
This Technical Specification provides information on the environmental aspects of equipment and accessories produced for the LPG industry. The following is addressed:
a)   design;
b)   manufacture;
c)   packaging;
d)   use and operation;
e)   disposal.

  • Technical specification
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14140:2014(Main)
LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Alternative design and construction
SIST EN 14140:2015

This European Standard specifies the minimum requirements for the design, construction and testing during manufacture of transportable refillable welded steel Liquefied Petroleum Gas (LPG) cylinders, of water capacity from 0,5 l up to and including 150 l, exposed to temperatures of -20 °C to +65 °C. It allows alternative design and construction methods to those required in EN 1442, including coated cylinders, over-moulded cylinders and cylinders for hot air balloons.
This European Standard applies only to pressure receptacles with a circular cross-section.
This European Standard does not include the equipping of the cylinders with valves and other service equipment.

  • Standard
    59 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14893:2014(Main)
LPG equipment and accessories - Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres
SIST EN 14893:2014

This European Standard specifies the minimum requirements for the material, design, construction, workmanship, equipping, inspection and testing at manufacture of transportable, refillable welded steel pressure drums of volumes over 150 l up to and including 1 000 l for Liquefied Petroleum Gases (LPG).
Vertical and horizontal cylindrical receptacles are covered.

  • Standard
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14570:2014(Main)
LPG equipment and accessories - Equipping of overground and underground LPG vessels
SIST EN 14570:2014

This European Standard specifies requirements for the equipping of LPG pressure vessels, overground and underground, with a volume not greater than 13 m3 manufactured in accordance with EN 12542 or equivalent and have been hydraulically tested.
The equipment covered by this European Standard is directly mounted onto the pressure vessel connections.
This European Standard excludes the equipping of depot storage vessels and refrigerated storage vessels.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12816:2010(Main)
LPG equipment and accessories - Transportable refillable LPG cylinders - Disposal
SIST EN 12816:2011

This European Standard specifies methods for the safe gas freeing and disposal of refillable LPG cylinders manufactured from steel, composite materials and aluminium, of water capacity 0,5 litres up to and including 150 litres.
This European Standard is applicable to the following:
-   welded and brazed steel LPG cylinders with a specified minimum wall thickness (see EN 1442 and EN 12807 or equivalent standard);
-   welded steel LPG cylinders without specified minimum wall thickness (see EN 14140 or equivalent standard);
-   welded aluminium LPG cylinders (see EN 13110 or equivalent standard);
-   composite LPG cylinders (see EN 14427 or equivalent standard).
This European Standard is intended to be applied to cylinders complying with ADR (including pi marked cylinders) and also to existing non ADR cylinder populations.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day