Aerospace series - Flange couplings - Swivel flange with 3 fastening holes, in nickel alloy - Inch series

This European Standard specifies the characteristics of swivel flanges, 3 holes, for flange couplings in nickel alloy for inch series aerospace applications.
Nominal pressure: up to 21 000 kPa; depends on the associated seal, tube material, tube diameter and tube wall thickness in the assembly (see EN 4814).
NOTE   Assembly in accordance with TR 4815.

Luft- und Raumfahrt - Rohrverschraubung mit Flanschen - Lose Flansche mit 3 Befestigungslöchern, aus Nickellegierung - Inch-Reihe

Diese Europäische Norm legt die Eigenschaften von losen Flanschen mit 3 Löchern für Rohrverschraubung mit Flanschen aus Nickellegierung in Anwendungen der Luft- und Raumfahrt (Inch-Reihe) fest.
Nenndruck: Bis zu 21 000 kPa; abhängig von der Dichtung, dem Rohrmaterial, dem Rohrdurchmesser und der Dicke der Rohrwand (siehe EN 4814).
ANMERKUNG   Montage nach TR 4815.

Série aérospatiale - Raccordement à bride - Brides flottantes avec 3 trous de fixation, en alliage de nickel - Série en inches

Aeronavtika - Prirobnične spojke - Vrtljiva prirobnica iz nikljeve zlitine s tremi pritrdilnimi luknjami - Colska izvedba

Ta evropski standard določa lastnosti vrtljivih prirobnic s tremi luknjami za prirobnične spojke iz nikljeve zlitine za colsko izvedbo v aeronavtiki.
Nazivni tlak: do 21.000 kPa, odvisno od povezanega tesnila, materiala cevi, premera cevi in debeline stene cevi v sestavu (glej standard EN 4814).
OPOMBA: Sestav v skladu s standardom TR 4815.

General Information

Status
Published
Publication Date
09-May-2017
Technical Committee
Drafting Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Due Date
10-May-2017
Completion Date
10-May-2017

Buy Standard

Standard
EN 4802:2017
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 4802:2017
01-julij-2017

$HURQDYWLND3ULUREQLþQHVSRMNH9UWOMLYDSULUREQLFDL]QLNOMHYH]OLWLQHVWUHPL

SULWUGLOQLPLOXNQMDPL&ROVNDL]YHGED

Aerospace series - Flange couplings - Swivel flange with 3 fastening holes, in nickel alloy

- Inch series
Luft- und Raumfahrt - Rohrverschraubung mit Flanschen - Losen Flanschen mit 3
Befestigungslöchern, aus Nickellegierung - Inch-Reihe

Série aérospatiale - Raccordement à bride - Brides flottantes avec 3 trous de fixation, en

alliage de nickel - Série en inches
Ta slovenski standard je istoveten z: EN 4802:2017
ICS:
23.040.60 Prirobnice, oglavki in spojni Flanges, couplings and joints
elementi
49.080 /HWDOVNLLQYHVROMVNL Aerospace fluid systems and
KLGUDYOLþQLVLVWHPLLQGHOL components
SIST EN 4802:2017 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 4802:2017
---------------------- Page: 2 ----------------------
SIST EN 4802:2017
EN 4802
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2017
EUROPÄISCHE NORM
ICS 49.080
English Version
Aerospace series - Flange couplings - Swivel flange with 3
fastening holes, in nickel alloy - Inch series

Série aérospatiale - Raccordement à bride - Brides Luft- und Raumfahrt - Rohrverschraubung mit

flottantes avec 3 trous de fixation, en alliage de nickel - Flanschen - Lose Flansche mit 3 Befestigungslöchern,

Série en inches aus Nickellegierung - Inch-Reihe
This European Standard was approved by CEN on 21 November 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this

European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references

concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by

translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management

Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,

Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels

© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4802:2017 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 4802:2017
EN 4802:2017 (E)
Contents Page

European foreword ................................................................................................................................................................. 3

1 Scope ............................................................................................................................................................................. 4

2 Normative references ............................................................................................................................................. 4

3 Required characteristics ....................................................................................................................................... 4

4 Designation ................................................................................................................................................................. 6

5 Identification marking ........................................................................................................................................... 6

6 Technical specification ........................................................................................................................................... 6

7 Quality Assurance..................................................................................................................................................... 6

---------------------- Page: 4 ----------------------
SIST EN 4802:2017
EN 4802:2017 (E)
European foreword

This document (EN 4802:2017) has been prepared by the Aerospace and Defence Industries Association of

Europe - Standardization (ASD-STAN).

After enquiries and votes carried out in accordance with the rules of this Association, this European

Standard has received the approval of the National Associations and the Official Services of the member

countries of ASD, prior to its presentation to CEN.

This European Standard shall be given the status of a national standard, either by publication of an identical

text or by endorsement, at the latest by November 2017, and conflicting national standards shal

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.