Protective clothing - Performance requirements for protective clothing worn by operators applying pesticides and for re-entry workers (ISO 27065:2017)

ISO 27065 establishes minimum performance, classification, and marking requirements for protective clothing worn by operators handling pesticide products as well as re-entry workers. For the purpose of ISO 27065, the term pesticide applies to insecticides, herbicides, fungicides, and other substances applied in liquid form that are intended to prevent, destroy, repel, or reduce any pest or weeds in agricultural settings, green spaces, roadsides, etc. It does not include biocidal products used for agricultural and non-agricultural settings.
Pesticide handling includes mixing and loading, application, and other activities such as cleaning contaminated equipment and containers. Concentrated pesticides are typically handled during mixing and loading. Protective clothing covered by ISO 27065includes, but is not limited to, shirts, jackets, trousers, coveralls, aprons, protective sleeves, caps/hats and other headwear (excluding hard hats made of rigid materials, e.g. hats worn by construction workers), and accessories used under knapsack/backpack sprayers.
ISO 27065 does not address items used for the protection of the respiratory tract, hands, and feet. ISO 27065 does not address protection against fumigants.

Schutzkleidung - Leistungsanforderungen an Schutzkleidung für die Anwender von Pflanzenschutzmitteln sowie Personen für Nachfolgearbeiten (ISO 27065:2017)

Diese Internationale Norm stellt die Mindestanforderungen an die Leistung, die Klassifizierung und die Kennzeichnung von Schutzkleidung auf, die sowohl von Anwendern von Pestizidprodukten als auch von Personen getragen wird, die Nachfolgearbeiten durchführen. In dieser Norm bezieht sich der Begriff Pestizid auf Insektizide, Herbizide, Fungizide und verschiedene andere Substanzen, die in landwirtschaftlichen Einrichtungen, in Grünanlagen, an Straßen usw. angewendet werden. Dazu zählen keine Biozidprodukte, die entweder landwirtschaftlich oder nicht landwirtschaftlich verwendet werden.
Die Handhabung von Pestiziden umfasst das Mischen und Befüllen, die Anwendung sowie weitere Tätigkeiten wie die Reinigung von kontaminierter Ausrüstung und von kontaminierten Behältern. Üblicherweise werden während des Mischens und Befüllens konzentrierte Pestizide verwendet. Schutzkleidung, die in dieser Internationalen Norm behandelt wird, umfasst Hemden, Jacken, Hosen, Overalls, Schürzen, Schutzärmel, Kappen/Hüte und weitere Kopfbedeckungen (außer Schutzhelmen aus starren Materialien, die z. B. von Bauarbeitern getragen werden) und Zubehör, das unter Rückenspritzgeräten verwendet wird, ist jedoch nicht darauf beschränkt.
Diese Internationale Norm behandelt keine Gegenstände, die für den Schutz der Atemwege, der Hände und Füße verwendet werden. Diese Internationale Norm behandelt keinen Schutz vor Begasungsmitteln.

Habillement de protection - Exigences de performance pour les vêtements de protection portés par les opérateurs appliquant des pesticides et pour les travailleurs de rentrée (ISO 27065:2017)

L'ISO 27065 établit les exigences de performance minimale, de classification et de marquage pour les vêtements de protection portés par les opérateurs manipulant des pesticides ainsi que par les travailleurs de rentrée. Aux fins de l'ISO 27065, le terme «pesticide» s'applique aux insecticides, herbicides, fongicides et autres substances appliquées sous forme liquide qui sont destinés à prévenir, détruire, repousser ou contenir les organismes nuisibles ou les mauvaises herbes en milieu agricole, dans les espaces verts, sur les bords de routes, etc. Il ne couvre pas les produits biocides utilisés en milieu agricole et non agricole.
La manipulation des pesticides inclut les opérations de mélange et chargement et d'application, et d'autres activités telles que le nettoyage des équipements et récipients contaminés. Les pesticides concentrés font généralement l'objet de manipulations lors du mélange et du chargement. Les vêtements de protection concernés par le l'ISO 27065 comprennent, entre autres, les chemises, vestes, pantalons, combinaisons, tabliers, manchettes de protection, casquettes/chapeaux et autres couvre-chefs (exclusion faite des casques de protection constitués de matériaux rigides, par exemple les casques portés par les travailleurs du bâtiment), ainsi que les accessoires utilisés en dessous des pulvérisateurs à dos.
L'ISO 27065 ne traite pas des articles utilisés pour la protection des voies respiratoires, des mains et des pieds. Il ne traite pas de la protection contre les fumigants.

Varovalna obleka - Zahtevane lastnosti za varovalno oblačilo, ki ga nosijo osebe, ki rokujejo s pesticidi in delavci pri ponovnem vstopu na kontaminirano območje (ISO 27065:2017)

Ta mednarodni standard določa minimalne zahteve glede zmogljivosti, razvrščanja in označevanja varovalnih oblačil za izvajalce tretiranja, ki ravnajo s tekočimi pesticidi, in delavce pri ponovnem vstopu na kontaminirano območje. Ravnanje s pesticidi vključuje njihov nanos v razredčeni sestavi, mešanje in polnjenje ter druge dejavnosti, kot so čiščenje kontaminirane opreme in posode. Med varovalna oblačila, ki so zajeta v tem mednarodnem standardu, med drugim spadajo zlasti srajce, jopiči, hlače, kombinezoni, predpasniki, zaščitni rokavi, kape/klobuki in druga pokrivala iz tekstilnih materialov ter materiali, nameščeni pod nahrbtne škropilnike. Ta mednarodni standard ne obravnava predmetov, ki se uporabljajo za zaščito dihalnih poti, rok in nog. Ta mednarodni standard ne obravnava zaščite pred biocidi, fumiganti ali izjemno hlapne tekočine.

General Information

Status
Published
Publication Date
21-Nov-2017
Withdrawal Date
30-May-2018
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
22-Nov-2017
Completion Date
22-Nov-2017

Relations

Buy Standard

Standard
EN ISO 27065:2018
English language
28 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-marec-2018
9DURYDOQDREOHND=DKWHYDQHODVWQRVWL]DYDURYDOQRREODþLORNLJDQRVLMRRVHEH
NLURNXMHMRVSHVWLFLGLLQGHODYFLSULSRQRYQHPYVWRSXQDNRQWDPLQLUDQRREPRþMH
,62
Protective clothing - Performance requirements for protective clothing worn by operators
applying pesticides and for re-entry workers (ISO 27065:2017)
Schutzkleidung - Leistungsanforderungen an Schutzkleidung für die Anwender von
Pflanzenschutzmitteln sowie Personen für Nachfolgearbeiten (ISO 27065:2017)
Vêtements de protection - Exigences de performance pour les vêtements de protection
portés par les opérateurs appliquant des pesticides et pour les travailleurs de rentrée
(ISO 27065:2017)
Ta slovenski standard je istoveten z: EN ISO 27065:2017
ICS:
13.340.10 Varovalna obleka Protective clothing
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 27065
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2017
EUROPÄISCHE NORM
ICS 13.340.10
English Version
Protective clothing - Performance requirements for
protective clothing worn by operators applying pesticides
and for re-entry workers (ISO 27065:2017)
Habillement de protection - Exigences de performance Schutzkleidung - Leistungsanforderungen an
pour les vêtements de protection portés par les Schutzkleidung für die Anwender von
opérateurs appliquant des pesticides et pour les Pflanzenschutzmitteln sowie Personen für
travailleurs de rentrée (ISO 27065:2017) Nachfolgearbeiten (ISO 27065:2017)
This European Standard was approved by CEN on 12 September 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 27065:2017 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
Endorsement notice . 3
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Regulation (EU) 2016/425 of the European Parliament and of the
Council of 9 March 2016 on personal protective equipment aimed to be covered. 4

European foreword
This document (EN ISO 27065:2017) has been prepared by Technical Committee ISO/TC 94 “Personal
safety - Protective clothing and equipment” in collaboration with Technical Committee CEN/TC 162
“Protective clothing including hand and arm protection and lifejackets” the secretariat of which is held
by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2018, and conflicting national standards shall be
withdrawn at the latest by May 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this
document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 27065:2017 has been approved by CEN as EN ISO 27065:2017 without any modification.
Annex ZA
(informative)
Relationship between this European Standard and the essential
requirements of Regulation (EU) 2016/425 of the European Parliament and
of the Council of 9 March 2016 on personal protective equipment aimed to
be covered
This European Standard has been prepared under a Commission’s standardization request to provide
one voluntary means of conforming to essential requirements of Regulation (EU) 2016/425 of the
European Parliament and of the Council of 9 March 2016 on personal protective equipment.
Once this standard is cited in the Official Journal of the European Union under that Regulation (EU)
2016/425, compliance with the normative clauses of this standard given in Table ZA.1 confers, within
the limits of the scope of this standard, a presumption of conformity with the corresponding essential
requirements of that Regulation (EU) 2016/425 and associated EFTA regulations.
Table ZA.1 — Correspondence between this European Standard and Regulation (EU) 2016/425
Essential Requirements of Regulation (EU) Clause(s)/sub- Remarks/Notes
2016/425 clause(s) of this EN
1.1.1. Ergonomics 8.1; 8.2
1.1.2.1. Optimum level of protection 8.1, 8.2
1.1.2.2. Classes of protection appropriate to 4
different levels of risk
1.2.1. Absence of inherent risks and other 6.7, 8.1
nuisance factors
1.2.1.1. Suitable constituent materials verified in ISO 13688
1.2.1.2. Satisfactory surface condition of all PPE verified in ISO 13688
parts in contact with the user
1.2.1.3. Maximum permissible user impediment 8.1, 8.2
1.3.1. Adaptation of PPE to user morphology 8.1, 8.2
1.3.2. Lightness and strength 6.5, 6.6, 7.4
2.4. PPE subject to ageing 5.1
2.12. PPE bearing one or more identification 9
markings or indicators directly or indirectly
relating to health and safety
3.10. Protection against substances and mixtures 6.2, 6.3, 6.4, 7.2, 7.3,
which are hazardous to health and against 8.3.1, 8.3.2
harmful biological agents
3.10.2. Protection against cutaneous and ocular
contact
WARNING 1 — Presumption of conformity stays valid only as long as a reference to this European
Standard is maintained in the list published in the Official Journal of the European Union. Users of this
standard should consult frequently the latest list published in the Official Journal of the European
Union.
WARNING 2 — Other Union legislation may be applicable to the product(s) falling within the scope of
this standard.
INTERNATIONAL ISO
STANDARD 27065
Second edition
2017-09
Protective clothing — Performance
requirements for protective clothing
worn by operators applying pesticides
and for re-entry workers
Habillement de protection — Exigences de performance pour les
vêtements de protection portés par les opérateurs appliquant des
pesticides et pour les travailleurs de rentrée
Reference number
ISO 27065:2017(E)
©
ISO 2017
ISO 27065:2017(E)
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved

ISO 27065:2017(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Classification and testing requirements . 3
5 Pre-treatment and conditioning . 5
5.1 Pre-treatment by cleaning . 5
5.2 Conditioning . 5
6 Performance requirements of protective clothing materials . 5
6.1 General . 5
6.2 Material resistance to penetration (pipette test) . 6
6.3 Material Repellency (pipette test) . 6
6.4 Material resistance to permeation . 7
6.5 Material tensile strength . 7
6.6 Material tear resistance . 7
6.7 Material puncture resistance . 8
7 Performance requirements of seams . 8
7.1 General . 8
7.2 Seam resistance to penetration . 8
7.3 Seam resistance to permeation . 8
7.4 Seam tensile strength . 9
8 Performance requirements of protective clothing . 9
8.1 General . 9
8.2 Ergonomic tests (practical performance) . 9
8.3 Liquid penetration resistance .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.