EN 4025:2001

Aerospace series - Pipe coupling 8°30' in titanium alloy - Elbows 45°, bulkhead

This standard specifies the characteristics of elbows 45°, bulkhead, for pipe couplings 8°30', in titanium alloy, for aerospace
applications.
Nominal pressure: up to 28 000 kPa
Temperature range:   55 °C to 135 °C

Luft- und Raumfahrt - Rohrverschraubung 8°30' aus Titanlegierung - Winkel-Schottverschraubungen 45°

Diese Norm legt die Eigenschaften von Winkel-Schottverschraubungen 45°, für Rohrverschraubungen 8°30', aus
Titanlegierung, zur Verwendung in der Luft- und Raumfahrt fest.
Nenndruck: bis 28 000 kPa
Temperaturbereich:   55 °C bis 135 °C

Série aérospatiale - Système de raccordement 8°30' en alliage de titane - Raccords coudés à 45° pour traversée de cloison

La présente norme spécifie les caractéristiques des raccords coudés à 45° pour traversée de cloison, pour les systèmes
de raccordement 8°30', en alliage de titane, pour applications aérospatiales.
Pression nominale: jusqu'à 28 000 kPa
Plage de température:   55 °C à 135 °C

Aerospace series - Pipe coupling 8°30' in titanium alloy - Elbows 45°, bulkhead

General Information

• Status: Withdrawn
• Publication Date: 23-Oct-2001
• Withdrawal Date: 12-Oct-2010
• ICS: 49.080 - Aerospace fluid systems and components
• Technical Committee: ASD/MECH - Mechanical
• Drafting Committee: ASD/MECH - Mechanical
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 13-Oct-2010
• Completion Date: 13-Oct-2010
• Ref Project: SIST EN 4025:2004 - Aerospace series - Pipe coupling 8°30' in titanium alloy - Elbows 45°, bulkhead

Relations

• Replaced By: EN 4025:2010 - Aerospace series - Pipe coupling 8°30' in titanium alloy - Elbows 45°, bulkhead
• Effective Date: 18-Oct-2010

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 4025:2004
01-maj-2004
Aerospace series - Pipe coupling 8°30' in titanium alloy - Elbows 45°, bulkhead
Aerospace series - Pipe coupling 8°30' in titanium alloy - Elbows 45°, bulkhead
Luft- und Raumfahrt - Rohrverschraubung 8°30' aus Titanlegierung - Winkel-
Schottverschraubungen 45°
Série aérospatiale - Systeme de raccordement 8°30' en alliage de titane - Raccords
coudés a 45° pour traversée de cloison
Ta slovenski standard je istoveten z: EN 4025:2001
ICS:
49.080 /HWDOVNLLQYHVROMVNL Aerospace fluid systems and
KLGUDYOLþQLVLVWHPLLQGHOL components
SIST EN 4025:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 4025:2004

---------------------- Page: 2 ----------------------

SIST EN 4025:2004
EUROPEAN STANDARD
EN 4025
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2001
ICS 49.080
English version
Aerospace series - Pipe coupling 8°30' in titanium alloy - Elbows
45°, bulkhead
Série aérospatiale - Système de raccordement 8°30' en Luft- und Raumfahrt - Rohrverschraubung 8°30' aus
alliage de titane - Raccords coudés à 45° pour traversée de Titanlegierung - Winkel-Schottverschraubungen 45°
cloison
This European Standard was approved by CEN on 29 December 2000.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2001 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4025:2001 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 4025:2004
EN 4025:2001 (E)
Foreword
This European Standard has been prepared by the European Association of Aerospace Manufacturers (AECMA).
After inquiries and votes carried out in accordance with the rules of this Association, this Standard has received the
approval of the National Associations and the Official Services of the member countries of AECMA, prior to its presentation
to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical text or by
endorsement, at the latest by April 2002, and conflicting national standards shall be withdrawn at the latest by April 2002.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are
bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany,
Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United
Kingdom.
2

---------------------- Page: 4 ----------------------

SIST EN 4025:2004
EN 4025:2001 (E)
1 Scope
This standard specifies the characteristics of elbows 45°, bulkhead, for pipe couplings 8°30', in titanium alloy, for aerospace
applications.
Nominal pressure: up to 28 000 kPa
Temperature range:  55 °C to 135 °C
2 Normative references
This European Standard incorporates by dated or undated reference provisions from other publications. These normative
references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references,
subsequent amendments to or revisions of any of these publications apply to this European Standard only when
incorporated in it by amendment or revision. For undated references, the latest edition of the publication referred to applies
(including amendments).
ISO 5855-3, Aerospace – MJ threads – Part 3: Limit dimensions for fittings for fluid systems.
EN 2424, Aerospace series – Marking of aerospace products.
EN 2491, Aerospace series – Molybdenum disulphide dry lubricants – Coating methods.
EN 3267, Aerospace series – Washers, bulkhead, in titanium alloy.
EN 3274,
Aerospace series – Pipe coupling 8°30' – Thread ends – Geometric configuration.
EN 3275, Aerospace series – Pipe coupling 8°30' up to 28 000 kPa – Dynamic beam seal – Metric series – Technical
specification.
1
EN 3311, Aerospace series – Titanium all
...