SIST EN 4025:2012

Aerospace series - Pipe coupling 8°30' in titanium alloy - Elbows 45°, bulkhead

This standard specifies the characteristics of elbows 45°, bulkhead, for pipe couplings 8°30', in titanium alloy, for aerospace applications.
Nominal pressure: up to 28 000 kPa.
Temperature range: - 55 °C to 135 °C.

Luft- und Raumfahrt - Rohrverschraubung 8°30' aus Titanlegierung - Winkel-Schottverschraubungen 45°

Diese Norm legt die Eigenschaften von Winkel-Schottverschraubungen 45°, für Rohrverschraubungen 8°30′,
aus Titanlegierung, zur Verwendung in der Luft- und Raumfahrt fest.
Nenndruck: bis 28 000 kPa.
Temperaturbereich: 55 °C bis 135 °C

Série aérospatiale - Système de raccordement 8°30' en alliage de titane - Raccords coudés à 45° pour traversée de cloison

Aeronavtika - Cevni priključek 8° 30' iz titanove zlitine - Kotni cevni priključek 45° s pregrado

Ta standard določa značilnosti kotnih cevnih priključkov 45° s pregrado iz titanove zlitine za aeronavtično uporabo. Nazivni tlak: do 28,000 kPa. Temperaturni razpon: od –55 °C do 135 °C.

General Information

• Status: Published
• Publication Date: 27-Nov-2011
• ICS: 49.080 - Aerospace fluid systems and components
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 24-Nov-2011
• Due Date: 29-Jan-2012
• Completion Date: 28-Nov-2011
• Ref Project: EN 4025:2010 - Aerospace series - Pipe coupling 8°30' in titanium alloy - Elbows 45°, bulkhead

Relations

• Replaces: SIST EN 4025:2004 - Aerospace series - Pipe coupling 8°30' in titanium alloy - Elbows 45°, bulkhead
• Effective Date: 01-Jan-2012

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.SUHJUDGRLuft- und Raumfahrt - Rohrverschraubung 8°30' aus Titanlegierung - Winkel-Schottverschraubungen 45°Série aérospatiale - Système de raccordement 8°30' en alliage de titane - Raccords coudés à 45° pour traversée de cloisonAerospace series - Pipe coupling 8°30' in titanium alloy - Elbows 45°, bulkhead49.080Aerospace fluid systems and componentsICS:Ta slovenski standard je istoveten z:EN 4025:2010SIST EN 4025:2012en,de01-januar-2012SIST EN 4025:2012SLOVENSKI
STANDARDSIST EN 4025:20041DGRPHãþD



SIST EN 4025:2012



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4025
October 2010 ICS 49.080 Supersedes EN 4025:2001English Version
Aerospace series - Pipe coupling 8°30' in titanium alloy - Elbows 45°, bulkhead
Série aérospatiale - Système de raccordement 8°30' en alliage de titane - Raccords coudés à 45° pour traversée de cloison
Luft- und Raumfahrt - Rohrverschraubung 8°30' aus Titanlegierung - Winkel-Schottverschraubungen 45° This European Standard was approved by CEN on 2 July 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4025:2010: ESIST EN 4025:2012



EN 4025:2010 (E) 2 Foreword This document (EN 4025:2010) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2011, and conflicting national standards shall be withdrawn at the latest by April 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 4025:2001. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 4025:2012



EN 4025:2010 (E) 3 Contents Page Foreword . 21Scope . 42Normative references . 43Required characteristics . 44Designation .
...