EN ISO 15147:2012

Light conveyor belts - Tolerances on widths and lengths of cut light conveyor belts (ISO 15147:2012)

ISO 15147:2012 specifies methods for the measurement of widths and lengths of cut light conveyor belts as described in ISO 21183-1 and specifies the tolerances on the dimensions.

Leichte Fördergurte - Toleranzen für Breite und Länge von geschnittenen leichten Fördergurten (ISO 15147:2012)

Diese Internationale Norm legt Verfahren für die Messung der Breite und Länge geschnittener leichter
Fördergurte nach ISO 21183-1 und die Toleranzen der Abmessungen fest.
ANMERKUNG Die Breiten und Längen leichter Fördergurte sind nicht genormt.

Courroies transporteuses légères - Tolérances sur largeurs et longueurs des courroies transporteuses légères à bords tranchés (ISO 15147:2012)

L'ISO 15147:2012 spécifie des méthodes pour le mesurage de la largeur et de la longueur des courroies transporteuses légères à bords tranchés décrites dans l'ISO 21183-1 et spécifie les tolérances sur les dimensions.

Naprave za kontinuirni transport - Lahki trakovi tračnih transporterjev - Tolerance dolžine in širine izrezanih lahkih trakov (ISO 15147:2012)

Ta mednarodni standard določa metode za merjenje dolžine in širine izrezanih lahkih trakov, kot je opisano v standardu ISO 21183-1, in določa tolerance dimenzij.

General Information

• Status: Published
• Publication Date: 30-Nov-2012
• Withdrawal Date: 29-Jun-2013
• ICS: 53.040.20 - Components for conveyors
• Technical Committee: CEN/TC 188 - Conveyor belts
• Drafting Committee: CEN/TC 188/WG 5 - Light conveyor belts
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 01-Dec-2012
• Completion Date: 01-Dec-2012
• Ref Project: SIST EN ISO 15147:2013 - Light conveyor belts - Tolerances on widths and lengths of cut light conveyor belts (ISO 15147:2012)

Relations

• Replaces: EN ISO 15147:1999 - Light conveyor belts - Tolerances on widths and lengths of cut light conveyor belts (ISO 15147:1999)
• Effective Date: 12-Dec-2012

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 15147:2013
01-junij-2013
1DGRPHãþD
SIST EN ISO 15147:1999
1DSUDYH]DNRQWLQXLUQLWUDQVSRUW/DKNLWUDNRYLWUDþQLKWUDQVSRUWHUMHY7ROHUDQFH
GROåLQHLQãLULQHL]UH]DQLKODKNLKWUDNRY,62
Light conveyor belts - Tolerances on widths and lengths of cut light conveyor belts (ISO
15147:2012)
Leichte Fördergurte - Toleranzen für Breite und Länge von geschnittenen leichten
Fördergurten (ISO 15147:2012)
Courroies transporteuses légères - Tolérances sur largeurs et longueurs des courroies
transporteuses légères à bords tranchés (ISO 15147:2012)
Ta slovenski standard je istoveten z: EN ISO 15147:2012
ICS:
53.040.20 Deli za transporterje Components for conveyors
SIST EN ISO 15147:2013 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 15147:2013

---------------------- Page: 2 ----------------------

SIST EN ISO 15147:2013


EUROPEAN STANDARD
EN ISO 15147

NORME EUROPÉENNE

EUROPÄISCHE NORM
December 2012
ICS 53.040.20 Supersedes EN ISO 15147:1999
English Version
Light conveyor belts - Tolerances on widths and lengths of cut
light conveyor belts (ISO 15147:2012)
Courroies transporteuses légères - Tolérances sur largeurs Leichte Fördergurte - Toleranzen für Breite und Länge von
et longueurs des courroies transporteuses légères à bords geschnittenen leichten Fördergurten (ISO 15147:2012)
tranchés (ISO 15147:2012)
This European Standard was approved by CEN on 30 November 2012.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15147:2012: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 15147:2013
EN ISO 15147:2012 (E)
Contents Page
Foreword .3
2

---------------------- Page: 4 ----------------------

SIST EN ISO 15147:2013
EN ISO 15147:2012 (E)
Foreword
This document (EN ISO 15147:2012) has been prepared by Technical Committee ISO/TC 41 "Pulleys and
belts (including veebelts)" in collaboration with Technical Committee CEN/TC 188 “Conveyor belts” the
secretariat of which is held by SNV.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2013, and conflicting national standards shall be withdrawn at
the latest by June 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 15147:1999.
According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 15147:2012 has been approved by CEN as a EN ISO 15147:2012 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 15147:2013

---------------------- Page: 6 ----------------------

SIST EN ISO 15147:2013
INTERNATIONAL ISO
STANDARD 15147
S
...