EN ISO 19105:2005
(Main)Geographic information - Conformance and testing (ISO 19105:2000)
Geographic information - Conformance and testing (ISO 19105:2000)
This International Standard specifies the framework, concepts and methodology for testing and criteria to be
achieved to claim conformance to the family of ISO geographic information standards. It provides a framework for
specifying abstract test suites (ATS) and for defining the procedures to be followed during conformance testing.
Conformance may be claimed for data or software products or services or by specifications including any profile or
functional standard.
Standardization of test methods and criteria for conformance to geographic information standards will allow
verification of conformance to those standards. Verifiable conformance is important to geographic information
users, in order to achieve data transfer and sharing.
This International Standard is applicable to all the phases of conformance and testing. These phases are
characterized by the following major activities:
a) the definition of ATS for conformance to the ISO geographic information standards;
b) the definition of test methods for conformance to the ISO geographic information standards;
c) the conformance assessment process carried out by a testing laboratory for a client, culminating in the
production of a conformance test report.
This International Standard specifies the requirements for, and gives guidance on, the procedures to be followed in
conformance testing for the ISO geographic information standards. It includes only such information as is
necessary to meet the following objectives:
1) to achieve confidence in the tests as a measure of conformance;
2) to achieve comparability between the results of corresponding tests applied in different places at different
times;
3) to facilitate communication between the parties responsible for the activities described in 1) and 2).
This International Standard provides a framework for certification (an administrative procedure which may follow
conformance testing) in informative annex B.
The following topics are outside the scope of this International Standard.
a) The description of requirements for procurement and contracts.
b) Testing by means of test methods which are specific to particular applications or systems.
c) Acceptance testing, performance testing and robustness testing.
The framework established by this International Standard includes the concept of executable test suites (ETS).
These, by their very nature, cannot be standardized; consequently, standardization of ETS is outside the scope of
this International Standard.
Geoinformation - Konformität und Prüfung (ISO 19105:2000)
Information géographique - Conformité et essais (ISO 19105:2000)
Geografske informacije - Ustreznost in preskušanje (ISO 19105:2000)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 19105:2005
01-april-2005
Geografske informacije - Ustreznost in preskušanje (ISO 19105:2000)
Geographic information - Conformance and testing (ISO 19105:2000)
Geoinformation - Konformität und Prüfung (ISO 19105:2000)
Information géographique - Conformité et essais (ISO 19105:2000)
Ta slovenski standard je istoveten z: EN ISO 19105:2005
ICS:
07.040 Astronomija. Geodezija. Astronomy. Geodesy.
Geografija Geography
35.240.70 Uporabniške rešitve IT v IT applications in science
znanosti
SIST EN ISO 19105:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 19105:2005
---------------------- Page: 2 ----------------------
SIST EN ISO 19105:2005
EUROPEAN STANDARD
EN ISO 19105
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2005
ICS 35.240.70
English version
Geographic information - Conformance and testing (ISO
19105:2000)
Information géographique - Conformité et essais (ISO Geoinformation - Konformität und Prüfung (ISO
19105:2000) 19105:2000)
This European Standard was approved by CEN on 24 December 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19105:2005: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 19105:2005
EN ISO 19105:2005 (E)
Foreword
The text of ISO 19105:2000 has been prepared by Technical Committee ISO/TC 211
"Geographic information/Geomatics” of the International Organization for Standardization (ISO)
and has been taken over as EN ISO 19105:2005 by Technical Committee CEN/TC 287
"Geographic Information", the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by July 2005, and conflicting national standards
shall be withdrawn at the latest by July 2005.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Endorsement notice
The text of ISO 19105:2000 has been approved by CEN as EN ISO 19105:2005 without any
modifications.
2
---------------------- Page: 4 ----------------------
SIST EN ISO 19105:2005
INTERNATIONAL ISO
STANDARD 19105
First edition
2000-12-15
Geographic information — Conformance
and testing
Information géographique — Conformité et essais
Reference number
ISO 19105:2000(E)
©
ISO 2000
---------------------- Page: 5 ----------------------
SIST EN ISO 19105:2005
ISO 19105:2000(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this
area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the addres
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.