EN ISO 13287:2012
(Main)Personal protective equipment - Footwear - Test method for slip resistance (ISO 13287:2012)
Personal protective equipment - Footwear - Test method for slip resistance (ISO 13287:2012)
ISO 13287:2012 specifies a method of test for the slip resistance of PPE footwear. It is not applicable to special purpose footwear containing spikes, metal studs or similar.
Persönliche Schutzausrüstung - Schuhe - Prüfverfahren zur Bestimmung der Rutschhemmung (ISO 13287:2012)
Diese Internationale Norm legt ein Prüfverfahren für die Rutschhemmung von Schuhen fest, die zu Persönlicher Schutzausrüstung (PSA) gehören. Sie ist nicht anwendbar auf Schuhwerk für besondere Zwecke, das mit Spikes, Metallstegen oder Ähnlichem ausgestattet ist.
ANMERKUNG Für Zwecke der Produktentwicklung dürfen Sohleneinheiten oder andere Sohlenbestandteile, wie Absatzoberflecke, geprüft werden.
Équipement de protection individuelle - Chaussures - Méthode d'essai pour la résistance au glissement (ISO 13287:2012)
L'ISO 13287:2012 spécifie une méthode d'essai permettant de déterminer la résistance au glissement des chaussures d'EPI. Elle ne s'applique pas aux chaussures destinées à un usage spécial, pourvues de crampons, de rivets métalliques ou de pièces équivalentes.
Osebna varovalna oprema - Obutev - Preskusna metoda za ugotavljanje upornosti zdrsa (ISO 13287:2012)
Ta mednarodni standard določa preskusno metodo za ugotavljanje odpornosti zdrsa obutve, ki se uporablja kot osebna varovalna oprema (PPE). Ne uporablja se za obutev za posebne namene, ki je opremljena s konicami, zakovicami ali podobnim.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-februar-2013
1DGRPHãþD
SIST EN ISO 13287:2007
Osebna varovalna oprema - Obutev - Preskusna metoda za ugotavljanje upornosti
zdrsa (ISO 13287:2012)
Personal protective equipment - Footwear - Test method for slip resistance (ISO
13287:2012)
Persönliche Schutzausrüstung - Schuhe - Prüfverfahren zur Bestimmung der
Rutschhemmung (ISO 13287:2012)
Équipement de protection individuelle - Chaussures - Méthode d'essai pour la résistance
au glissement (ISO 13287:2012)
Ta slovenski standard je istoveten z: EN ISO 13287:2012
ICS:
13.340.50 Varovanje nog in stopal Leg and foot protection
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 13287
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2012
ICS 13.340.50 Supersedes EN ISO 13287:2007
English Version
Personal protective equipment - Footwear - Test method for slip
resistance (ISO 13287:2012)
Équipement de protection individuelle - Chaussures - Persönliche Schutzausrüstung - Schuhe - Prüfverfahren zur
Méthode d'essai pour la résistance au glissement (ISO Bestimmung der Rutschhemmung (ISO 13287:2012)
13287:2012)
This European Standard was approved by CEN on 14 October 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13287:2012: E
worldwide for CEN national Members.
Contents Page
Foreword .3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 89/686/EEC .4
Foreword
This document (EN ISO 13287:2012) has been prepared by Technical Committee CEN/TC 161 “Foot and leg
protectors”, the secretariat of which is held by BSI, in collaboration with Technical Committee ISO/TC 94
"Personal safety - Protective clothing and equipment".
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by April 2013, and conflicting national standards shall be withdrawn at the
latest by April 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 13287:2007.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive.
For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document.
According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Annex ZA
(informative)
Relationship between this European Standard and the Essential
Requirements of EU Directive 89/686/EEC
This European Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association to provide a means of conforming to the Essential Requirements of
the New Approach Directive (89/686/EEC).
Once this standard is cited in the Official Journal of the European Union under that Directive and has been
implemented as a national standard in at least one Member State, compliance with the clauses of this
standard, together with the relevant requirements given in the product standards, confers within the limits of
the scope of those standards, a presumption of conformity with the corresponding Essential Requirements of
that Directive and associated EFTA regulations."
The clauses of this European Standard specify a test method for the relevant requirement of safety, protective
or occupational footwear to support the essential requirement 3.1.2.1 of Directive 89/686/EEC, Annex II.
WARNING: Other requirements and other EU Directives may be applicable to products falling within
the scope of this standard.
INTERNATIONAL ISO
STANDARD 13287
Second edition
2012-10-15
Personal protective equipment —
Footwear — Test method for slip resistance
Équipement de protection individuelle — Chaussures — Méthode
d’essai pour la résistance au glissement
Reference number
ISO 13287:2012(E)
©
ISO 2012
ISO 13287:2012(E)
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2012 – All rights reserved
ISO 13287:2012(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Apparatus and materials . 2
5 Sampling and conditioning . 3
5.1 Sampling . 3
5.2 Conditioning . 3
6 Test method . 4
6.1 Principle . 4
6.2 Test modes and test conditions . 4
7 Preparation of footwear and floor . 8
7.1 Footwear . 8
7.2 Floor .10
8 Procedure .10
9 Test report . 11
Annex A (normative) Standard shoemaking last and mechanical foot for testing footwear .12
Annex B (informative) Background information relating to Eurotile 1 and Eurotile 2 .14
Annex C (normative) Specification of Eurotile 1 .15
Annex D (normative) Specification of Eurotile 2 (OFIR) .16
Annex E (normative) Calibration procedure for Eurotile tiles and other test surfaces .17
Bibliography .20
ISO 13287:2012(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International
Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 13287 was prepared by the European Committee for Standardization (CEN) Technical Committee
CEN/TC 161, Foot and leg protectors, in collaboration with ISO Technical Committee ISO/TC 94, Personal
safety — Protective clothing and equipment, Subcommittee SC 3, Foot protection, in accordance with the
agreement on technical cooperation between ISO and CEN (Vienna Agreement).
This second edition cancels and replaces the first edition (ISO 13287:2006), which has been restructured for
ease of use, more precisely specified in many areas and technically revised. The main technical revisions are:
— Subclause 4.1.2 and Clause 6 allow the use of the footwear manufacturer’s shoemaking last;
— Subclauses 4.5 and 8.9 and Annexes B and D introduce ceramic tile Eurotile 2 as a replacement for
Eurotile 1 (Annex C);
— Subclause 6.2.4 changes a timing parameter in the test;
— Subclauses 7.1.6 and 7.2.4 limit the amount of use of footwear and floor specimens before requiring
re-preparation;
— Annex E has been added, which amends and supersedes ISO 20344:2011, 5.11.2, including a technical
change in E.4.6.
The Bibliography refers to an instructional video available to users of this International Standard.
iv © ISO 2012 – All rights reserved
INTERNATIONAL STANDARD ISO 13287:2012(E)
Personal protective equipment — Footwear — Test method for
slip resistance
1 Scope
This International Standard specifies a method of test for the slip resistance of PPE footwear. It is not applicable
to special purpose footwear containing spikes, metal studs or similar.
NOTE For product development purposes, sole units or other soling components such as top pieces may be tested.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable
for its application. For dated references, only the edition cited applies. For undated references, the latest edition
of the referenced document (including any amendments) applies.
ISO 4287, Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions
and surface texture parameters
ISO 4662, Rubber, vulcanized or thermoplastic — Determination of rebound resilience
3 Terms and definitions
For the purposes of this International Standard, the following terms and definitions apply.
3.1
normal force
force applied to the surface through the footwear, perpendicular (90°) to
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.