EN 13600:2013

Copper and copper alloys - Seamless copper tubes for electrical purposes

This European Standard specifies the composition, property requirements including electrical properties, and tolerances on dimensions and form for seamless drawn copper tubes for electrical purposes, delivered in straight lengths or alternatively in level wound coils with the cross-sections and size ranges below:
-   for round tubes in straight lengths with outside diameters from 3 mm up to and including 450 mm and wall thicknesses from 0,3 mm;
-   for round tubes in level wound coils with outside diameters from 3 mm up to and including 30 mm and wall thicknesses from 0,3 mm;
-   for square and rectangular tubes with major outside dimension from 5 mm up to and including 150 mm and wall thicknesses from 0,5 mm up to and including 10 mm.
The sampling procedures and test methods for verification of conformity to the requirements of this standard are also specified.

Kupfer und Kupferlegierungen - Nahtlose Rohre aus Kupfer für die Anwendung in der Elektrotechnik

Diese Europäische Norm legt die Zusammensetzung, die Anforderungen an die Eigenschaften einschließlich elektrische Eigenschaften, Grenzabmaße und Formtoleranzen für nahtlose Kupferrohre für die Elektrotechnik, geliefert in geraden Längen, fest, mit den Querschnitten und Größenbereichen wie folgt:
-   für Rundrohre in geraden Längen mit Außendurchmessern von 3 mm bis 450 mm und Wanddicken von 0,3 mm;
-   für Rundrohre in gespulten Ringen mit Außendurchmessern von 3 mm bis 30 mm und Wanddicken von 0,3 mm;
-   für quadratische und rechteckige Rohre mit den größten Außenmaßen von 5 mm bis 150 mm und Wanddicken von 0,5 mm bis 10 mm.
Der Ablauf der Probenentnahme und die Prüfverfahren zur Feststellung der Übereinstimmung mit den Anforderungen der Norm sind ebenfalls festgelegt.

Cuivre et alliages de cuivre - Tubes sans soudure en cuivre pour usages électriques

La présente Norme européenne spécifie la composition, les caractéristiques, y compris les caractéristiques
électriques, et les tolérances de dimensions et de forme des tubes étirés sans soudure en cuivre pour usages
électriques fournis en longueurs droites ou en bobines trancannées, de coupes transversales et de
dimensions suivantes :
 pour les tubes ronds en longueurs droites de diamètres extérieurs compris entre 3 mm et 450 mm inclus
et d'épaisseurs de paroi supérieures ou égales à 0,3 mm ;
 pour les tubes ronds en bobines trancannées de diamètres extérieurs compris entre 3 mm et 30 mm
inclus et d'épaisseurs de paroi supérieures ou égales à 0,3 mm ;
 pour les tubes carrés et rectangulaires de dimensions extérieures principales comprises entre 5 mm
et 150 mm inclus et d'épaisseurs de paroi comprises entre 0,5 mm et 10 mm inclus.
Les procédures d'échantillonnage et les méthodes d'essai pour la vérification de la conformité aux exigences
de la présente norme sont également spécifiées.

Baker in bakrove zlitine - Nevarjene bakrene cevi za uporabo v elektrotehniki

Ta evropski standard določa sestavo, zahteve glede značilnosti, vključno z električnimi lastnostmi, ter odstopanja glede dimenzij in oblike za nevarjene bakrene cevi za uporabo v elektrotehniki, dobavljene v ravnih odsekih ali v kolutih z naslednjimi preseki in velikostmi: - za cevi z okroglim prerezom v ravnih odsekih z zunanjimi premeri od 3 mm do vključno 450 mm in debelino stene od 0,3 mm; - za cevi z okroglim prerezom v kolutih z zunanjimi premeri od 3 mm do vključno 30 mm in debelino stene od 0,3 mm; - za kvadratne in pravokotne cevi z zunanjo dimenzijo od 5 mm do vključno 150 mm in debelino stene od 0,5 mm do vključno 10 mm. Določeni so tudi postopki vzorčenja in preskusne metode za preverjanje skladnosti z zahtevami tega standarda.

General Information

• Status: Withdrawn
• Publication Date: 18-Jun-2013
• Withdrawal Date: 06-Apr-2021
• ICS: 77.150.30 - Copper products
• Technical Committee: CEN/TC 133 - Copper and copper alloys
• Drafting Committee: CEN/TC 133/WG 4 - Extruded and drawn products, forgings and scrap
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 07-Apr-2021
• Ref Project: SIST EN 13600:2013 - Copper and copper alloys - Seamless copper tubes for electrical purposes

Relations

• Replaces: EN 13600:2002 - Copper and copper alloys - Seamless copper tubes for electrical purposes
• Effective Date: 08-Jun-2022
• Replaced By: EN 13600:2021 - Copper and copper alloys - Seamless copper tubes for electrical purposes
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Baker in bakrove zlitine - Nevarjene bakrene cevi za uporabo v elektrotehnikiCopper and copper alloys - Seamless copper tubes for electrical purposes77.150.30Bakreni izdelkiCopper productsICS:Ta slovenski standard je istoveten z:EN 13600:2013SIST EN 13600:2013en,de01-september-2013SIST EN 13600:2013SLOVENSKI
STANDARDSIST EN 13600:20041DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13600
June 2013 ICS 77.150.30 Supersedes EN 13600:2002English Version
Copper and copper alloys - Seamless copper tubes for electrical purposes
Cuivre et alliages de cuivre - Tubes sans soudure en cuivre pour usages électriques
Kupfer und Kupferlegierungen - Nahtlose Rohre aus Kupfer für die Anwendung in der Elektrotechnik This European Standard was approved by CEN on 25 April 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13600:2013: ESIST EN 13600:2013

Characteristics of coppers for electrical purposes . 23 Bibliography . 25
This is one of a series of European Standards for copper products for electrical purposes. Other copper products are specified as follows:  EN 13599, Copper and copper alloys — Copper plate, sheet and strip for electrical purposes  EN 13601, Copper and copper alloys — Copper rod, bar and wire for general electrical purposes  EN 13602, Copper and copper alloys — Drawn, round copper wire for the manufacture of electrical conductors  EN 13604, Copper and copper alloys — Semiconductor devices, electronic and vacuum products made from high conductivity copper  EN 13605, Copper and copper alloys — Copper profiles and profiled wire for electrical purposes According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, SIST EN 13600:2013
...