EN 13600:2002

Copper and copper alloys - Seamless copper tubes for electrical purposes

This European Standard specifies the composition, property requirements including electrical properties, and
tolerances on dimensions and form for seamless drawn copper tubes for electrical purposes, delivered in straight
lengths with the cross-sections and size ranges below:
         for round tubes with outside diameters from 5 mm up to and including 150 mm and wall thicknesses from
         0,5 mm up to and including 20 mm;
         for square and rectangular tubes with major outside dimension from 5 mm up to and including 150 mm and wall
         thicknesses from 0,5 mm up to and including 10 mm.
The sampling procedures, the methods of test for verification of conformity to the requirements of this standard, and
the delivery conditions are also specified.

Kupfer und Kupferlegierungen - Nahtlose Rohre aus Kupfer für die Anwendung in der Elektrotechnik

Diese Europäische Norm legt die Zusammensetzung, die Anforderungen an die Eigenschaften einschließlich
elektrische Eigenschaften, Grenzabmaße und Formtoleranzen für nahtlose Kupferrohre für die Elektrotechnik,
geliefert in geraden Längen, fest, mit den Querschnitten und Größenbereichen wie folgt:
         für Rundrohre mit Außendurchmessern von 5 mm bis 150 mm und Wanddicken von 0,5 mm bis 20 mm;
         für quadratische und rechteckige Rohre mit den größten Außenmaßen von 5 mm bis 150 mm und Wanddicken
         von 0,5 mm bis 10 mm.
Der Ablauf der Probenentnahme, die Prüfverfahren zur Feststellung der Übereinstimmung mit den Anforderungen
der Norm und die Lieferbedingungen sind ebenfalls festgelegt.

Cuivre et alliages de cuivre - Tubes sans soudure en cuivre pour usages électriques

La présente norme européenne spécifie la composition, les caractéristiques, y compris les caractéristiques électriques et les tolérances de dimensions et de formes des tubes étirés sans soudure en cuivre pour usages électriques fournis en longueurs droites de coupes transversales et de dimensions suivantes :
-   pour les tubes ronds de diamètres extérieurs compris entre 5 mm et 150 mm inclus et d'épaisseurs de paroi comprises entre 0,5 mm et 20 mm inclus ;
-   pour les tubes carrés et rectangulaires de dimensions extérieures principales comprises entre 5 mm et 150 mm inclus et d'épaisseurs de paroi comprises entre 0,5 mm et 10 mm inclus.
Les procédures d'échantillonnage, les méthodes d'essai pour la vérification de la conformité aux exigences de la présente norme et les conditions de livraison sont également spécifiées.

Baker in bakrove zlitine – Nevarjene bakrene cevi za uporabo v elektrotehniki

General Information

• Status: Withdrawn
• Publication Date: 19-Mar-2002
• Withdrawal Date: 18-Jun-2013
• ICS: 77.150.30 - Copper products
• Technical Committee: CEN/TC 133 - Copper and copper alloys
• Drafting Committee: CEN/TC 133/WG 4 - Extruded and drawn products, forgings and scrap
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 19-Jun-2013
• Completion Date: 19-Jun-2013
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Ref Project: SIST EN 13600:2004 - Copper and copper alloys - Seamless copper tubes for electrical purposes

Relations

• Replaced By: EN 13600:2013 - Copper and copper alloys - Seamless copper tubes for electrical purposes
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Baker in bakrove zlitine – Nevarjene bakrene cevi za uporabo v elektrotehnikiKupfer und Kupferlegierungen - Nahtlose Rohre aus Kupfer für die Anwendung in der ElektrotechnikCuivre et alliages de cuivre - Tubes sans soudure en cuivre pour usages électriquesCopper and copper alloys - Seamless copper tubes for electrical purposes77.150.30Bakreni izdelkiCopper productsICS:Ta slovenski standard je istoveten z:EN 13600:2002SIST EN 13600:2004en01-januar-2004SIST EN 13600:2004SLOVENSKI
STANDARD



SIST EN 13600:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13600March 2002ICS 77.150.30English versionCopper and copper alloys - Seamless copper tubes for electricalpurposesCuivre et alliages de cuivre - Tubes sans soudure en cuivrepour usages électriquesKupfer und Kupferlegierungen - Nahtlose Rohre aus Kupferfür die Anwendung in der ElektrotechnikThis European Standard was approved by CEN on 22 February 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13600:2002 ESIST EN 13600:2004



EN 13600:2002 (E)ContentspageForeword .3
1Scope .4
2Normative references .4
3Terms and definitions .4
4Designations .5
4.1Material .5
4.2Material condition .5
4.3Product .5
5Ordering information .7
6Requirements .8
6.1Composition .8
6.2Mechanical properties
..............8
6.3Electrical properties .8
6.4Freedom from hydrogen embrittlement .8
6.5Dimensions and tolerances .8
6.6Mass tolerances .10
6.7Surface condition .10
7Sampling .10
7.1General .10
7.2Analysis .10
7.3Mechanical and electrical tests .10
8Test methods .11
8.1Analysis .11
8.2Tensile test .11
8.3Hardness test .11
8.4Electrical resistivity test .11
8.5Hydrogen embrittlement test .11
8.6Retests .11
8.7Rounding of results .12
9Declaration of conformity and inspectiondocumentation .12
9.1Declaration of conformity .12
9.2Inspection documentation .12page10Marking, packaging, labelling .12Annex A
(informative)
Characteristics of coppers for electrical purposes .21Bibliography .23TablesTable 1 — Composition of copper .13Table 2 — Mechanical properties .14Table 3 — Electrical properties (at 20 °C) .15Table 4 — Tolerance on outside diameter ofround tubes .16Table 5 — Tolerance on across-flats dimensions of square and rectangular tubes .17Table 6 — Corner radii of square andrectangular tubes .17Table 7 — Tolerances on wall thickness .18Table 8 — Tolerances on manufacturedlengths .18Table 9 — Tolerances on fixed lengths .18Table 10 — Twist of square and rectangulartubes .18Table 11 — Straightness .18Table 12 — Mass tolerances .18Table 13 — Sampling rate .20Table A.1 – Particular characteristics ofcoppers for electrical purposes .222SIST EN 13600:2004



EN 13600:2002 (E)ForewordThis document EN 13600:2002 has been prepared by Technical Committee CEN/TC 133 "Copper and copperalloys", the secretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by September 2002, and conflicting national standards shall be withdrawn at the latestby September 2002.Within its programme
...