FprEN 13880-3
(Main)Hot applied joint sealants - Part 3: Test method for the determination of penetration and recovery (resilience)
Hot applied joint sealants - Part 3: Test method for the determination of penetration and recovery (resilience)
This document specifies a test method as an indicator both for the penetration resistance (hardness) and elastic recovery after de-loading (resilience) of hot applied joint sealants according to EN 14188 1 at 25 °C using a standard penetrometer fitted with a ball penetration tool.
Heiß verarbeitbare Fugenmassen - Teil 3: Prüfverfahren zur Bestimmung der Kugel-Penetration und des elastischen Rückstellvermögens
Dieses Dokument legt ein Prüfverfahren als Indikator für den Eindringwiderstand (Härte) und die elastische Rückverformung nach Entfernen der Last (Resilienz) von heiß verarbeitbaren Fugenmassen nach EN 14188 1 bei 25 °C mit Hilfe eines genormten Penetrometers mit einem Penetrationskugel-Werkzeug fest.
Produits de scellement de joints appliqués à chaud - Partie 3 : Méthode d'essais pour la détermination de la pénétrabilité et du retour élastique
Ce document décrit une méthode d'essai servant d'indicateur à la fois pour la résistance à la pénétration (dureté) et la récupération élastique après déchargement (résilience) des mastics de joints appliqués à chaud selon la norme EN 14188 -1 à 25 °C en utilisant un pénétromètre standard équipé d'un outil de pénétration à bille.
Tesnilne mase za stike, ki se vgrajujejo po vročem postopku - 3. del: Preskusna metoda za ugotavljanje penetracije in sposobnosti vrnitve v prvotno stanje
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 13880-3:2022
01-december-2022
Tesnilne mase za stike, ki se vgrajujejo po vročem postopku - 3. del: Preskusna
metoda za ugotavljanje penetracije in sposobnosti vrnitve v prvotno stanje
Hot applied joint sealants - Part 3: Test method for the determination of penetration and
recovery (resilience)
Heiß verarbeitbare Fugenmassen - Teil 3: Prüfverfahren zur Bestimmung der Kugel-
Penetration und des elastischen Rückstellvermögens
Produits de scellement de joints appliqués à chaud - Partie 3 : Méthode d'essais pour la
détermination de la pénétrabilité et du retour élastique
Ta slovenski standard je istoveten z: prEN 13880-3
ICS:
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
93.080.20 Materiali za gradnjo cest Road construction materials
oSIST prEN 13880-3:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 13880-3:2022
---------------------- Page: 2 ----------------------
oSIST prEN 13880-3:2022
DRAFT
EUROPEAN STANDARD
prEN 13880-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2022
ICS 93.080.20 Will supersede EN 13880-3:2003
English Version
Hot applied joint sealants - Part 3: Test method for the
determination of penetration and recovery (resilience)
Produits de scellement de joints appliqués à chaud - Heiß verarbeitbare Fugenmassen - Teil 3:
Partie 3 : Méthode d'essais pour la détermination de la Prüfverfahren zur Bestimmung der Kugel-Penetration
pénétrabilité et du retour élastique und des elastischen Rückstellvermögens
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 227.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13880-3:2022 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 13880-3:2022
prEN 13880-3:2022 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Principle . 4
5 Apparatus . 5
5.1 Penetrometer . 5
5.2 Ball penetration tool . 5
5.3 Water bath .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.