CEN/TS 16170:2012
(Main)Sludge, treated biowaste and soil - Determination of elements using inductively coupled plasma optical emission spectrometry (ICP-OES)
Sludge, treated biowaste and soil - Determination of elements using inductively coupled plasma optical emission spectrometry (ICP-OES)
This Technical Specification specifies a method for the determination of the following elements in aqua regia, nitric acid digest solutions of sludge, treated biowaste and soil:
Aluminium (Al), antimony (Sb), arsenic (As), barium (Ba), beryllium (Be), bismuth (Bi), boron (B), cadmium (Cd), calcium (Ca), chromium (Cr), cobalt (Co), copper (Cu), gallium (Ga), indium (In), iron (Fe), lead (Pb), lithium (Li), magnesium (Mg), manganese (Mn), mercury (Hg), molybdenum (Mo), nickel (Ni), phosphorus (P), potassium (K), selenium (Se), silicon (Si), silver (Ag), sodium (Na), strontium (Sr), sulfur (S), thallium (Tl), tin (Sn), titanium (Ti), tungsten (W), uranium (U), vanadium (V), zinc (Zn) and zirconium (Zr).
Table A.1 lists the elements for which this method is applicable along with the recommended wavelength and typical instrumental detection limits for clean matrices.
Schlamm, behandelter Bioabfall und Boden - Bestimmung von Elementen mittels optischer Emissionsspektrometrie mit induktiv gekoppeltem Plasma (ICP-OES)
Diese Technische Spezifikation legt ein Verfahren fest, nach dem in Aufschlusslösungen von Schlamm, behandeltem Bioabfall und Boden nach Königswasser oder Salpetersäureaufschluss die folgenden Elemente bestimmt werden:
Aluminium (Al), Antimon (Sb), Arsen (As), Barium (Ba), Beryllium (Be), Blei (Pb), Bor (B), Cadmium (Cd), Calcium (Ca), Chrom (Cr), Eisen (Fe), Gallium (Ga), Indium (In), Kalium (K), Kobalt (Co), Kupfer (Cu), Lithium (Li), Magnesium (Mg), Mangan (Mn), Molybdän (Mo), Natrium (Na), Nickel (Ni), Phosphor (P), Quecksilber (Hg), Schwefel (S), Selen (Se), Silber (Ag), Silicium (Si), Strontium (Sr), Thallium (Tl), Titan (Ti), Uran (U), Vanadium (V), Wismut (Bi), Wolfram (W), Zink (Zn) Zinn (Sn),und Zirkonium (Zr).
In Tabelle A.1 sind die Elemente aufgeführt, auf die dieses Verfahren anwendbar ist, sowie die empfohlenen Wellenlängen und die geräteabhängigen Nachweisgrenzen, die für reine Matrices üblicherweise zutreffen.
Boues, bio-déchets et sols - Détermination des éléments en traces par spectrométrie d'émission optique avec plasma induit par haute fréquence (ICP-OES)
La présente Spécification technique spécifie une méthode de détermination des éléments suivants dans des digestats d’eau régale et d’acide nitrique de boues, de bio-déchets traités et de sols :
Aluminium (Al), antimoine (Sb), arsenic (As), baryum (Ba), béryllium (Be), bismuth (Bi), bore (B), cadmium (Cd), calcium (Ca), chrome (Cr), cobalt (Co), cuivre (Cu), gallium (Ga), indium (In), fer (Fe), plomb (Pb), lithium (Li), magnésium (Mg), manganèse (Mn), mercure (Hg), molybdène (Mo), nickel (Ni), phosphore (P), potassium (K), sélénium (Se), silicium (Si), argent (Ag), sodium (Na), strontium (Sr), soufre (S), thallium (Tl), étain (Sn), titane (Ti), tungstène (W), uranium (U), vanadium (V), zinc (Zn) et zirconium (Zr).
Le Tableau A.1 donne la liste des éléments pour lesquels la présente méthode est applicable ainsi que la longueur d’onde recommandée et les limites de détection typiques de l’instrument pour des matrices propres.
Blato, obdelani biološki odpadki in tla - Določevanje elementov z optično emisijsko spektrometrijo z induktivno sklopljeno plazmo (ICP/OES)
V tej tehnični specifikaciji je opredeljena metoda za določevanje naslednjih elementov v zlatotopki, raztopini izvlečka dušikove kisline blata, obdelanih bioloških odpadkov in tal: aluminij (Al), antimon (Sb), arzen (As), barij (Ba), berilij (Be), bizmut (Bi), bor (B), kadmij (Cd), kalcij (Ca), krom (Cr), kobalt (Co), baker (Cu), galij (Ga), indij (In), železo (Fe), svinec (Pb), litij (Li), magnezij (Mg), mangan (Mn), merkur (Hg), molibden (Mo), nikelj (Ni), fosfor (P), kalij (K), selen (Se), silicij (Si), srebro (Ag), natrij (Na), stroncij (Sr), žveplo (S), talij (Tl), kositer (Sn), titan (Ti), volfram (W), uran (U), vanadij (V), cink (Zn) in cirkonij (Zr). V preglednici A.1 so navedeni elementi, za katere se lahko uporabi ta metoda, priporočene valovne dolžine in značilne meje detekcije instrumentov za čiste matrice.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST-TS CEN/TS 16170:2013
01-februar-2013
%ODWRREGHODQLELRORãNLRGSDGNLLQWOD'RORþHYDQMHHOHPHQWRY]RSWLþQR
HPLVLMVNRVSHNWURPHWULMR]LQGXNWLYQRVNORSOMHQRSOD]PR ,&32(6
Sludge, treated biowaste and soil - Determination of elements using inductively coupled
plasma optical emission spectrometry (ICP-OES)
Schlamm, behandelter Bioabfall und Boden - Bestimmung von Elementen mittels
optischer Emissionsspektrometrie mit induktiv gekoppeltem Plasma (ICP-OES)
Boues, bio-déchets et sols - Détermination des éléments en traces par spectrométrie
d'émission optique avec plasma induit par haute fréquence (ICP-OES)
Ta slovenski standard je istoveten z: CEN/TS 16170:2012
ICS:
13.030.20 7HNRþLRGSDGNL%ODWR Liquid wastes. Sludge
13.080.10 .HPLMVNH]QDþLOQRVWLWDO Chemical characteristics of
soils
71.040.50 Fizikalnokemijske analitske Physicochemical methods of
metode analysis
SIST-TS CEN/TS 16170:2013 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST-TS CEN/TS 16170:2013
---------------------- Page: 2 ----------------------
SIST-TS CEN/TS 16170:2013
TECHNICAL SPECIFICATION
CEN/TS 16170
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
November 2012
ICS 13.030.01; 13.080.10
English Version
Sludge, treated biowaste and soil - Determination of elements
using inductively coupled plasma optical emission spectrometry
(ICP-OES)
Boues, bio-déchets et sols - Détermination des éléments Schlamm, behandelter Bioabfall und Boden - Bestimmung
en traces par spectrométrie d'émission optique avec von Elementen mittels optischer Emissionsspektrometrie
plasma induit par haute fréquence (ICP-OES) mit induktiv gekoppeltem Plasma (ICP-OES)
This Technical Specification (CEN/TS) was approved by CEN on 16 July 2012 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 16170:2012: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST-TS CEN/TS 16170:2013
CEN/TS 16170:2012 (E)
Contents Page
Foreword .3
Introduction .4
1 Scope .5
2 Normative references .5
3 Principle .5
4 Interferences .5
5 Reagents .6
6 Apparatus .8
7 Procedure .9
7.1 Test sample solution .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.