EN 13108-4:2006

Bituminous mixtures - Material specifications - Part 4: Hot Rolled Asphalt

This European Standard specifies requirements for mixtures of the mix group Hot Rolled Asphalt for use on roads, airfields and other trafficked areas.
This European Standard includes requirements for the selection of the constituent materials. It is designed to be read in conjunction with EN 13108-20 and EN 13108-21.
Hot Rolled Asphalt mixtures with chemical modified binders not covered by EN 13924 are not covered by this European Standard.

Asphaltmischgut - Mischgutanforderungen - Teil 4: Hot Rolled Asphalt

Diese Europäische Norm legt Anforderungen an Mischgüter der Mischgutgruppe Hot Rolled Asphalt fest, die für die Verwendung beim Bau von Straßen, Flugplätzen und sonstigen Verkehrsflächen bestimmt sind.
ANMERKUNG   Die Spezifikation des Mischgutes nach dieser Europäischen Norm kann entweder zur Konformitätserklärung dieses Mischgutes mit bekannten Anforderungen verwendet werden oder zur Bekanntmachung welche diese Anforderungen sind.
Diese Europäische Norm enthält Anforderungen an die Auswahl der Bestandteile. Sie ist in Verbindung mit EN 13108 20 und EN 13108 21 anzuwenden.
Hot Rolled Asphalt mit chemisch modifizierten Bindemitteln, die nicht durch EN 14023 abgedeckt sind, sind nicht Gegenstand dieser Europäischen Norm.

Mélanges bitumineux - Spécifications des matériaux - Partie 4: Hot rolled asphalt

Cette norme européenne spécifie les exigences relatives aux mélanges appartenant aux hot rolled asphalt utilisables pour les routes, les aéroports et les autres zones de circulation.
Note : Une spécification sur un mélange issue de cette norme peut être utilisée soit pour déclarer la conformité d’un mélange à des exigences connues soit pour faire savoir ce que sont ces exigences.
Cette norme européenne inclut des exigences pour le choix des constituants. Elle est destinée à être utilisée conjointement avec les normes EN 13108-20 et EN 13108-21.
Les hot rolled asphalt avec des liants chimiquement modifiés qui ne relèvent pas de la norme EN 14023 ne sont pas couverts par la présente Norme européenne.

Bitumenske zmesi - Specifikacije materialov - 4. del: Vroče valjani asfalt

General Information

• Status: Withdrawn
• Publication Date: 09-May-2006
• Withdrawal Date: 14-Jun-2016
• ICS: 93.080.20 - Road construction materials
• Technical Committee: CEN/TC 227 - Road materials
• Drafting Committee: CEN/TC 227/WG 1 - Bituminous mixtures
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 15-Jun-2016
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/124 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on road construction products
• Ref Project: SIST EN 13108-4:2006 - Bituminous mixtures - Material specifications - Part 4: Hot Rolled Asphalt

Relations

• Replaced By: EN 13108-4:2016 - Bituminous mixtures - Material specifications - Part 4: Hot Rolled Asphalt
• Effective Date: 25-Jul-2012
• Corrected By: EN 13108-4:2006/AC:2008 - Bituminous mixtures - Material specifications - Part 4: Hot Rolled Asphalt
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bituminous mixtures - Material specifications - Part 4: Hot Rolled AsphaltMélanges bitumineux - Spécifications des matériaux - Partie 4: Hot rolled asphaltAsphaltmischgut - Mischgutanforderungen - Teil 4: Hot Rolled AsphaltTa slovenski standard je istoveten z:EN 13108-4:2006SIST EN 13108-4:2006en93.080.20ICS:SLOVENSKI
STANDARDSIST EN 13108-4:200601-julij-2006







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13108-4May 2006ICS 93.080.20 English VersionBituminous mixtures - Material specifications - Part 4: Hot RolledAsphaltMélanges bitumineux - Spécifications des matériaux -Partie 4: Hot Rolled AsphaltAsphaltmischgut - Mischgutanforderungen - Teil 4: HotRolled AsphaltThis European Standard was approved by CEN on 12 October 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13108-4:2006: E



EN 13108-4:2006 (E) 2 Contents Page Foreword.4 Introduction.5 1 Scope.6 2 Normative references.6 3 Terms, definitions, symbols and abbreviations.7 3.1 Terms and definitions.7 3.2 Symbols and abbreviations.8 4 Requirements for constituent materials.9 4.1 General.9 4.2 Binder.9 4.2.1 General.9 4.2.2 Selection of binder.9 4.3 Aggregates.10 4.3.1 Coarse aggregate.10 4.3.2 Fine aggregate.10 4.3.3 All-in aggregates.10 4.3.4 Added filler.10 4.4 Reclaimed asphalt.10 4.5 Additives.
...