EN 12593:2007

Bitumen and bituminous binders - Determination of the Fraass breaking point

This European Standard specifies a method for determining the Fraass breaking point which measures the brittleness of bitumen and bituminous binders at low temperatures.
WARNING - Use of this European Standard can involve hazardous materials, operations and equipment. This European Standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this European Standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Bitumen und bitumenhaltige Bindemittel - Bestimmung des Brechpunktes nach Fraaß

Bitumes et liants bitumineux - Détermination du point de fragilité Fraass

La présente Norme européenne prescritspécifie une méthode de détermination du point de fragilité Fraass qui fournit une mesure de qui permet de déterminer la fragilité des bitumes routiers et des liants bitumineux à basse température.
AVERTISSEMENT - L'utilisation de la présente Norme européenne peut impliquer l'intervention de produits, d'opérations et d'équipements à caractère dangereux. La présente Norme européenne n'est pas censée aborder tous les problèmes de sécurité concernés par son usage. Il est de la responsabilité de l'utilisateur de consulter et d'établir des règles de sécurité et d'hygiène appropriées et de déterminer l'applicabilité des restrictions réglementaires avant utilisation.

Bitumen in bitumenska veziva - Določanje pretrgališča po Fraassu

General Information

• Status: Withdrawn
• Publication Date: 13-Mar-2007
• Withdrawal Date: 30-Jun-2015
• ICS: 75.140 - Waxes, bituminous materials and other petroleum products
• ICS: 91.100.50 - Binders. Sealing materials
• Technical Committee: CEN/TC 336 - Bituminous binders
• Drafting Committee: CEN/TC 336 - Bituminous binders
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 01-Jul-2015
• Ref Project: SIST EN 12593:2007 - Bitumen and bituminous binders - Determination of the Fraass breaking point

Relations

• Replaces: EN 12593:1999 - Bitumen and bituminous binders - Determination of the Fraass breaking point
• Effective Date: 22-Dec-2008
• Replaced By: EN 12593:2015 - Bitumen and bituminous binders - Determination of the Fraass breaking point
• Effective Date: 08-Jul-2015

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bitumen and bituminous binders - Determination of the Fraass breaking pointBitumes et liants bitumineux - Détermination du point de fragilité FraassBitumen und bitumenhaltige Bindemittel - Bestimmung des Brechpunktes nach FraaßTa slovenski standard je istoveten z:EN 12593:2007SIST EN 12593:2007en91.100.50Veziva. Tesnilni materialiBinders. Sealing materials75.140Voski, bitumni in drugi naftni proizvodiWaxes, bituminous materials and other petroleum productsICS:SIST EN 12593:20001DGRPHãþDSLOVENSKI
STANDARDSIST EN 12593:200701-julij-2007







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12593March 2007ICS 75.140; 91.100.50Supersedes EN 12593:1999
English VersionBitumen and bituminous binders - Determination of the Fraassbreaking pointBitumes et liants bitumineux - Détermination du point defragilité FraassBitumen und bitumenhaltige Bindemittel - Bestimmung desBrechpunktes nach FraaßThis European Standard was approved by CEN on 3 February 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12593:2007: E



EN 12593:2007 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Principle.4 5 Apparatus.4 6 Sampling and sample preparation.6 7 Procedure.7 8 Expression of results.8 9 Precision.8 10 Test report.9 Annex A (normative)
Characteristics of the thermometer.15



EN 12593:2007 (E) 3 Foreword This document (EN 12593:2007) has been prepared by Technical Committee CEN/TC 336 “Bituminous binders”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2007, and conflicting national standards shall be withdrawn at the latest by September 2007. This document supersedes EN 12593:1999. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, L
...