EN ISO 17872:2007
(Main)Paints and varnishes - Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing (ISO 17872:2007)
Paints and varnishes - Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing (ISO 17872:2007)
ISO 17872:2007 describes methods of scribing coated steel or test-pieces for corrosion tests, where the coating system is applied at dry film thicknesses of less than 500 micrometres. It is intended as a guideline only, being based on the results of a collaborative trial with no subsequent corrosion testing having been carried out to determine the suitability of the introduced scribe marks for such tests.
ISO 17872:2007 covers the scribing of metallic panels or test pieces made from
steel,
chemically treated steel,
aluminium or aluminium alloy, and
chemically treated aluminium.
It does not cover the scribing of galvanized or electroplated metal or clad aluminium panels.
Beschichtungsstoffe - Leitfaden zum Anbringen von Ritzen durch eine Beschichtung auf Metallplatten für Korrosionsprüfungen (ISO 17872:2007)
Diese Internationale Norm legt ein Verfahren zum Ritzen von beschichtetem Stahl oder von Probenstücken für Korrosionsprüfungen fest, wenn das Beschichtungssystem in Trockenschichtdicken unter 500 µm aufgebracht ist. Sie ist als Leitfaden zu sehen, der auf Ergebnissen gemeinsamer Untersuchungen beruht, ohne dass nachfolgend Korrosionsprüfungen durchgeführt wurden, um die Tauglichkeit der angebrachten Ritze für solche Prüfungen zu untersuchen.
Die Norm behandelt das Ritzen von metallischen Probenplatten oder Probenstücken aus:
Stahl;
chemisch vorbehandeltem Stahl;
Aluminium oder Aluminiumlegierungen;
chemisch vorbehandeltem Aluminium.
Sie behandelt nicht das Ritzen von verzinktem Metall oder Metall mit galvanischen Überzügen oder plattierten Aluminiumplatten.
Peintures et vernis - Lignes directrices pour la production de rayures au travers du revêtement de panneaux métalliques en vue des essais de corrosion (ISO 17872:2007)
L'ISO 17872:2007 décrit des méthodes de réalisation de rayures sur de l'acier revêtu ou sur des éprouvettes, en vue d'essais de corrosion sur des systèmes de peinture dont l'épaisseur de feuil sec est inférieure à 500 micromètres. Elle est fondée sur le résultat d'un essai interlaboratoires, sans essai ultérieur de corrosion pour vérifier le caractère approprié des rayures effectuées, et n'est destinée qu'à donner des lignes directrices.
L'ISO 17872:2007 traite de la réalisation de rayures sur des panneaux ou des éprouvettes métalliques
en acier,
en acier avec traitement chimique,
en aluminium ou en alliages d'aluminium,
en aluminium avec traitement chimique.
Elle ne traite pas de la réalisation de rayures sur des panneaux en métal galvanisé, ou en métal revêtu d'un dépôt électrolytique ou d'un alliage d'aluminium.
Barve in laki - Smernice za uvajanje sledi rezov v premazih na kovinskih ploščah za preskušanje odpornosti proti koroziji (ISO 17872:2007)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 17872:2007
01-julij-2007
%DUYHLQODNL6PHUQLFH]DXYDMDQMHVOHGLUH]RYYSUHPD]LKQDNRYLQVNLKSORãþDK
]DSUHVNXãDQMHRGSRUQRVWLSURWLNRUR]LML ,62
Paints and varnishes - Guidelines for the introduction of scribe marks through coatings
on metallic panels for corrosion testing (ISO 17872:2007)
Beschichtungsstoffe - Leitfaden zum Anbringen von Ritzen durch eine Beschichtung auf
Metallplatten für Korrosionsprüfungen (ISO 17872:2007)
Peintures et vernis - Lignes directrices pour la production de rayures au travers du
revetement de panneaux métalliques en vue des essais de corrosion (ISO 17872:2007)
Ta slovenski standard je istoveten z: EN ISO 17872:2007
ICS:
87.040 Barve in laki Paints and varnishes
SIST EN ISO 17872:2007 en;fr;de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
EN ISO 17872
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2007
ICS 87.040
English Version
Paints and varnishes - Guidelines for the introduction of scribe
marks through coatings on metallic panels for corrosion testing
(ISO 17872:2007)
Peintures et vernis - Lignes directrices pour la production Beschichtungsstoffe - Leitfaden zum Anbringen von Ritzen
de rayures au travers du revêtement de panneaux durch eine Beschichtung auf Metallplatten für
métalliques en vue des essais de corrosion (ISO Korrosionsprüfungen (ISO 17872:2007)
17872:2007)
This European Standard was approved by CEN on 17 February 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17872:2007: E
worldwide for CEN national Members.
---------------------- Page: 2 ----------------------
EN ISO 17872:2007 (E)
Foreword
This document (EN ISO 17872:2007) has been prepared by Technical Committee ISO/TC 35
"Paints and varnishes" in collaboration with Technical Committee CEN/TC 139 "Paints and
varnishes", the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by September 2007, and conflicting national
standards shall be withdrawn at the latest by September 2007.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United
Kingdom.
Endorsement notice
The text of ISO 17872:2007 has been approved by CEN as EN ISO 17872:2007 without any
modifications.
2
---------------------- Page: 3 ----------------------
INTERNATIONAL ISO
STANDARD 17872
First edition
2007-03-01
Paints and varnishes — Guidelines for
the introduction of scribe marks through
coatings on metallic panels for corrosion
testing
Peintures et vernis — Lignes directrices pour la production de rayures
au travers du revêtement de panneaux métalliques en vue des essais
de corrosion
Reference number
ISO 17872:2007(E)
©
ISO 2007
---------------------- Page: 4 ----------------------
ISO 17872:2007(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.